polluterv2 in a ls1
#41
TECH Senior Member
iTrader: (2)
Join Date: Aug 2012
Location: Howell & Fenton MI
Posts: 11,145
Likes: 0
Received 15 Likes
on
15 Posts
My cam is just a hair smaller than the Polluter V2 on a 6.0 with a 6-speed and 4.10 gears. I honestly wouldn't want much bigger even with this setup.
Good choice on SNS 2 op
Good choice on SNS 2 op
#45
TECH Junkie
I got a 3200, 11" converter with full size 12" lock up (actually extra wide carbon) lock up clutch. For a killer price. They're a non sponsor here tho.
Popular options on here are yank, circle d, vigilante, etc. most recommendations you'll see on here are for 3600-4000 stall.
Popular options on here are yank, circle d, vigilante, etc. most recommendations you'll see on here are for 3600-4000 stall.
#48
TECH Junkie
I can pm you a link to the one I got. I picked it because it had the extra wide carbon clutch but a smaller diameter turbine housing. So you get the performance stall without a tiny clutch that you get in most small converters. It's rated for 500 horse.
#50
10 Second Club
iTrader: (8)
I had that converter from circle d, and while I liked it on the street and the quality was really good, it didn't hit hard enough for a decent 60'. It also ballooned really bad on a 150 shot. If you can afford it, get the smaller diameter bilet in 3600 or 3800 stall. You don't need a triple clutch.
#51
Teching In
Thread Starter
Join Date: Mar 2015
Location: minnesota
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info. Kinda lost when it comes to this stuff. Wondering about a yank ss3600 or maybe one from one of these ebay shops.....so look for a billet one at least?
#56
TECH Junkie
Looks like it pulls hard once it hits 4k...sortof has to crawl till it gets there tho. Not a bad graph all in all. Heads?
#57
On The Tree
Join Date: May 2014
Location: FortLauderdale/Orlando
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
#59
Staging Lane
Join Date: Mar 2013
Location: Cumberland Md
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
You're gonna hate that SNS stage 2...
Seriously though, this cam rocks. Great power under the curve and it just sounds nasty. It's a head turner to say the least.
As for a stall I recommend something like a Yank SS4000. I have the 3600 and wish I woulda went with the 4k.
Seriously though, this cam rocks. Great power under the curve and it just sounds nasty. It's a head turner to say the least.
As for a stall I recommend something like a Yank SS4000. I have the 3600 and wish I woulda went with the 4k.
#60
TECH Senior Member
iTrader: (26)
Stock heads. Who needs power under 4k if you're never spinning the motor that slow in any "go fast" situation? I either drive really slow or fast. Don't see the need.
02 SS Cam/FBO - YouTube
02 SS Cam/FBO - YouTube