ffhp ls6 style heads
Thread Starter
On The Tree
Joined: May 2002
Posts: 155
Likes: 2
From: kentucky
ffhp ls6 style heads i know they start with a patriot casting and they are hand finished and assembled by them,does anybody know the flow numbers or the port volume on them.i was thinking of using them with a f13 
you could also just man up and buy their real LS6 heads that are CNC ported by a three letter company i won't name 
then hand finished by FFHP. great company to deal with, always very helpful.
then hand finished by FFHP. great company to deal with, always very helpful. Thread Starter
On The Tree
Joined: May 2002
Posts: 155
Likes: 2
From: kentucky
Originally Posted by cyphur_traq
you could also just man up and buy their real LS6 heads that are CNC ported by a three letter company i won't name then hand finished by FFHP. great company to deal with, always very helpful.
then hand finished by FFHP. great company to deal with, always very helpful.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
did he ever get them flowed...if so where are the numbers? can you just buy a set of partiot's and then send them to ffhp...or do you order them from them and they do all that work themselves?
Thread Starter
On The Tree
Joined: May 2002
Posts: 155
Likes: 2
From: kentucky
Originally Posted by 777
did he ever get them flowed...if so where are the numbers? can you just buy a set of partiot's and then send them to ffhp...or do you order them from them and they do all that work themselves?
Suspended Sponsor Account
Joined: Feb 2004
Posts: 430
Likes: 0
From: Pewee Valley, KY
JRP runs a set of Stage 1 5.7L heads that we did for him, somewhere in this thread are his flow numbers
https://ls1tech.com/forums/sponsor-sales-specials/221412-stage-1-5-7l-heads.html
on the LS6 style we start with the Patriot casting and then go from there, you can buy the casting from PP and send them to us, but it usually works better and easier to work directly with us in this case.
I will post some flow numbers later today once I get to the shop.
https://ls1tech.com/forums/sponsor-sales-specials/221412-stage-1-5-7l-heads.html
on the LS6 style we start with the Patriot casting and then go from there, you can buy the casting from PP and send them to us, but it usually works better and easier to work directly with us in this case.
I will post some flow numbers later today once I get to the shop.
Originally Posted by ForceFed HP
JRP runs a set of Stage 1 5.7L heads that we did for him, somewhere in this thread are his flow numbers
https://ls1tech.com/forums/showthread.php?t=221412
on the LS6 style we start with the Patriot casting and then go from there, you can buy the casting from PP and send them to us, but it usually works better and easier to work directly with us in this case.
I will post some flow numbers later today once I get to the shop.
https://ls1tech.com/forums/showthread.php?t=221412
on the LS6 style we start with the Patriot casting and then go from there, you can buy the casting from PP and send them to us, but it usually works better and easier to work directly with us in this case.
I will post some flow numbers later today once I get to the shop.