Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Stealthy cams?

Thread Tools
 
Search this Thread
 
Old Nov 21, 2004 | 06:11 PM
  #1  
MachoCamacho's Avatar
Thread Starter
12 Second Club
 
Joined: Jul 2004
Posts: 479
Likes: 0
From: Mpls, Minnesota
Default Stealthy cams?

Alright, just thinkin bout more future stuff(further than my camaro goes, since by this time it'll be a weekend car), i might end up gettin a GTO, but anyways, what are the peak power/best power bands you've seen out of the stealthier cams, such as the MTI stealth II, the TR 224/224 114(or 112), and such, also torquer if there are any results, and what are the idles like?(stock, lil rougher, lot rougher), any info on any cam is welcome.
Reply
Old Nov 21, 2004 | 11:29 PM
  #2  
PREDATOR-Z's Avatar
TECH Senior Member
 
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
Default

MTI Stealth II here, my hp peaks at 5900 and carries 400+hp all the way to ~6400 where it starts dipping slightly. I shift at 6600.
Reply
Old Nov 21, 2004 | 11:46 PM
  #3  
MachoCamacho's Avatar
Thread Starter
12 Second Club
 
Joined: Jul 2004
Posts: 479
Likes: 0
From: Mpls, Minnesota
Default

cam+bolt ons only right?
Reply
Old Nov 21, 2004 | 11:49 PM
  #4  
Ryan1985's Avatar
12 Second Club
 
Joined: Oct 2004
Posts: 207
Likes: 0
From: Arlington,TX
Default

i would also like more info. Im going to look into one of those cam.
Reply
Old Nov 22, 2004 | 12:46 AM
  #5  
boosted03cobra's Avatar
TECH Apprentice
 
Joined: Jan 2003
Posts: 337
Likes: 0
From: houston
Default

those stealth cams from mti are bad *** my bud has one his ss he made 391rwhp with a stealth2 and bolt ons
Reply
Old Nov 22, 2004 | 12:51 AM
  #6  
PREDATOR-Z's Avatar
TECH Senior Member
 
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
Default

Originally Posted by MachoCamacho
cam+bolt ons only right?
Yes full bolt ons including pulley, ported LS6, 80mm TB, FIPK, MACs (port matched with modified collector),Stock heads (241) but with light valvetrain and this was with TC locked, open cutout and of course free mods + tuning , stock de-screened MAF.(only thing missing is EWP)
One thing I have to say is here we run 98 octane premium gas which enables me to run over 30* advance timing with no KR, TR6 plugs. (I shoot up to 200 dry on occasions )
Reply
Old Nov 22, 2004 | 01:54 AM
  #7  
Drew778's Avatar
10 Second Club
iTrader: (2)
 
Joined: Feb 2002
Posts: 866
Likes: 0
From: Hawaii
Default

Do auto's need tuning for the stealth II?
Reply
Old Nov 22, 2004 | 02:10 AM
  #8  
PREDATOR-Z's Avatar
TECH Senior Member
 
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
Default

No, but to optimise output yes.
When I fired it up it took about 5 min for it to idle almost normally. But you have to tune shift points and adjust AFR, that was about it.
Only an experienced ear could tell it wasn't stock like, it does lope a little if you decrease idle but I guess every cam lopes LOL.
Reply




All times are GMT -5. The time now is 04:56 PM.