Finally fired up the 408 Stroker
07-26-2005, 10:13 PM
#1
Restricted User
Thread Starter
iTrader: (43)
Join Date: Nov 2001
Location: Pittsburgh, PA
Posts: 2,669
Likes: 0
Received 0 Likes
on
0 Posts
Finally fired up the 408 Stroker (video) I finally had a chance to get the motor in the car. It has been sitting next to it since the middle of April. Anyway, I got the motor in and only had time to tune for the start up and idle. I think I have it good enough that I can start to log some driving to get the VE table into place. Here is a video I took tonight of it. I will list the specs as well. Let me know what you think...
http://video.ls1tech.com/Player.aspx...8-6ED4DEFFD0A7
408 Stroker
Lunati Crank and Rods
Diamond Pistons
Absolute Speed Stage 2 241 Heads
Comp Cams 244/248 XE-r
Comp R Lifters
Comp 977 Springs
LS2 Timing Chain
ASP Pulley
Mellings Oil Pump
Fast 90/90
http://video.ls1tech.com/Player.aspx...8-6ED4DEFFD0A7
408 Stroker
Lunati Crank and Rods
Diamond Pistons
Absolute Speed Stage 2 241 Heads
Comp Cams 244/248 XE-r
Comp R Lifters
Comp 977 Springs
LS2 Timing Chain
ASP Pulley
Mellings Oil Pump
Fast 90/90
Last edited by 2001 Pewter WS6; 07-27-2005 at 07:07 AM.
07-26-2005, 10:32 PM
#3
Restricted User
Thread Starter
iTrader: (43)
Join Date: Nov 2001
Location: Pittsburgh, PA
Posts: 2,669
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1QuickT-A
Still waiting for the video to be "optimized"... damnit!
07-27-2005, 06:57 AM
#5
Restricted User
Thread Starter
iTrader: (43)
Join Date: Nov 2001
Location: Pittsburgh, PA
Posts: 2,669
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1QuickT-A
Its working now! Nice lookin ride and it sounds mean as hell!! Is that a nitrous grind cam? Sounds like its got alot of overlap..
07-27-2005, 07:05 AM
#7
Restricted User
Thread Starter
iTrader: (43)
Join Date: Nov 2001
Location: Pittsburgh, PA
Posts: 2,669
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gomer
What LSA and ICL is it?
It idles pretty nice at 900 rpm. Drop it in gear and it is rock steady as well.
Trending Topics
07-29-2005, 07:12 AM
#19
Restricted User
Thread Starter
iTrader: (43)
Join Date: Nov 2001
Location: Pittsburgh, PA
Posts: 2,669
Likes: 0
Received 0 Likes
on
0 Posts
ovaltobowtie2 - As someone else stated 6.0 iron block, 4" crank, 4.030 bore
JFM - How have you been feeling buddy? I should have some track runs soon. I will keep you posted. What is going on with your car? Nice avatar by the way!!!
SSilverSSufer - Thanks, I love the way it sounds. The cam is pretty awsome. I went for a quick ride down the street last night and blipped the throttle and immediately went sideways. I was on 2nd gear in an A4. It holds a nice idle at 900rpm. I am going to try and back it down to 800 and see if it still will hold idle. Should lope like crazy if it does.
Brandon - I don't know what is up with that link. It works then it doesn't.
JFM - How have you been feeling buddy? I should have some track runs soon. I will keep you posted. What is going on with your car? Nice avatar by the way!!!
SSilverSSufer - Thanks, I love the way it sounds. The cam is pretty awsome. I went for a quick ride down the street last night and blipped the throttle and immediately went sideways. I was on 2nd gear in an A4. It holds a nice idle at 900rpm. I am going to try and back it down to 800 and see if it still will hold idle. Should lope like crazy if it does.
Brandon - I don't know what is up with that link. It works then it doesn't.
