What is YOUR A/F at?
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I am interested in what A/F everyone runs with their bolt on, cam only, or heads/cam car. I was always under the impression that you wanted to stay right around the 13.0 range. What is the highest that you can SAFELY run before you start to shorten the life of your car?
What A/F does it need to be to be safe with a dry shot? In the mid 12's? High 11's? Just looking to see what everyone else is at compared to me. Post up!
What A/F does it need to be to be safe with a dry shot? In the mid 12's? High 11's? Just looking to see what everyone else is at compared to me. Post up!
#3
11 Second Club
iTrader: (27)
Join Date: May 2002
Location: East Palestine, OH - USA
Posts: 2,397
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Mine is about 13.0. Graph is here: https://ls1tech.com/forums/dynamometer-results-comparisons/476349-tr230-224-a4-dyno.html
Trending Topics
#14
TECH Senior Member
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by FDLS1
Where are you guys measuring it at, the tail pipe? or do you have a wide band O2 pluged in after the headers?
#17
TECH Fanatic
iTrader: (3)
Join Date: May 2003
Location: Lake Anna, VA/ Fairmont, WV
Posts: 1,795
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
12.8-1 LM WB Dyno Tailpipe
Street is stays 13.0-1
I've ran 3 different Cam and H/C setups with this above and have not had a single problem in 3+ years.
As BilliumSS said above 11.5-11.8 for the N20.
Street is stays 13.0-1
I've ran 3 different Cam and H/C setups with this above and have not had a single problem in 3+ years.
As BilliumSS said above 11.5-11.8 for the N20.