looking at car, what do u think about its mod list
#1
Staging Lane
Thread Starter
iTrader: (3)
Join Date: May 2006
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
looking at car, what do u think about its mod list
recently sold my lightning and i'm looking to purchase a 99 camaro i found for sale. just curious what some of you think about the mod list on the car and maybe what to look for/look out for. car has 61k and he's asking 13,900. says it ran a 12.5 2.0 60" at 115 without the heads. sorry for the newbie questions, i've been reading around the sight about some of the mods but thought it would be better to just ask.
here is a video of what it sounds like
http://baycityrides.com/media/borns_duech_005.mov
m6
MSD 8.5 wires
cutout
TB bypass
goldline lowering springs
short throw shifter
FTRA
ASP pulleys
Harwood 3" cowl induction hood
Bauer TB
chrome Z28 tips
160 thermo, MADZ28 tuning
billet grille
drilled and slotted rotors
painted calipers
clear corners
MAC headers (un-catted Y)
LS6 intake
Comp Cams 224/224 581/581 on 112
Livernois Ls2/Ls6 stage 1 heads
Rollmaster double roller chain
Manley springs and titanium retainers
TR hardened pushrods
Nitto DR's.
Tuned by MADZ28
18 inch polished Z06 wheels
thanx in advance
here is a video of what it sounds like
http://baycityrides.com/media/borns_duech_005.mov
m6
MSD 8.5 wires
cutout
TB bypass
goldline lowering springs
short throw shifter
FTRA
ASP pulleys
Harwood 3" cowl induction hood
Bauer TB
chrome Z28 tips
160 thermo, MADZ28 tuning
billet grille
drilled and slotted rotors
painted calipers
clear corners
MAC headers (un-catted Y)
LS6 intake
Comp Cams 224/224 581/581 on 112
Livernois Ls2/Ls6 stage 1 heads
Rollmaster double roller chain
Manley springs and titanium retainers
TR hardened pushrods
Nitto DR's.
Tuned by MADZ28
18 inch polished Z06 wheels
thanx in advance
Last edited by monkeysl; 05-18-2006 at 12:13 PM.
#3
He did quite a bit to it. It looks like he took really good care of the car. Does he have any maintenance records with it?? What's his reason for selling?? (Buying a house, girlfriend pregnant, or is something wrong with it??) If I did that much to my car, I'd have to have a damned good reason for selling it.
#5
Staging Lane
Thread Starter
iTrader: (3)
Join Date: May 2006
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Gearhead1
He did quite a bit to it. It looks like he took really good care of the car. Does he have any maintenance records with it?? What's his reason for selling?? (Buying a house, girlfriend pregnant, or is something wrong with it??) If I did that much to my car, I'd have to have a damned good reason for selling it.
#6
Staging Lane
Thread Starter
iTrader: (3)
Join Date: May 2006
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
my only hold back is, i found a post he made where he had troubles when he installed the heads. when i asked him about it, he said he tried to install himself the first time and torqued the rocker arms (i think it was) wrong and it wouldn't run right and he ended up having a buddy that builds cars redo it and since then it has run perfect. would that scare anybody else and think it could have caused damage? really i've been into the mod motors for the past lil while so push-rods are something i'm getting back into.
#7
TECH Senior Member
iTrader: (4)
as far as torquing rocker arms, its not all that hard to do, just tighten. I dont see how it could run incorrectly unless he just finger tightened them. Delve into this just a little further to make sure he didnt have any piston to valve colissions or anything. Might want to do a quick compression test if he dosnt mind. Assuming everythings fine, thats a good price for a pretty stout setup.
Trending Topics
#8
Staging Lane
Thread Starter
iTrader: (3)
Join Date: May 2006
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GuitsBoy
as far as torquing rocker arms, its not all that hard to do, just tighten. I dont see how it could run incorrectly unless he just finger tightened them. Delve into this just a little further to make sure he didnt have any piston to valve colissions or anything. Might want to do a quick compression test if he dosnt mind. Assuming everythings fine, thats a good price for a pretty stout setup.