trex question 
trex question
Your bottom end might be asking for trouble. The T-rex will feed off of nitrous because of the split grind. You should search on this. There is probably enough info out there about this that the search will overload and break from the high yield.
Some people will say you may dump some of it out the exhaust but I doubt it will yield anything less than 125hp from a 125 shot. Your biggest enemy is going to be your stall. You will have to have around a 4400 stall with the TRex cam to get the most out of it, and if you spray on that off the line you will flash to 5k+ and be at your rev limiter in no time-unless you have some reeeeal sticky tires!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I know a guy that took a stock bottom end LS1 with headers, lid, cutout, TREX, 4800 stall, and a 225 shot, stock 98 intake, a stock 3.23 gear, and BFG drags and went 6.50's in the 1/8. I would say they do well with nitrous.