Rod choice
900 rwhp and over 7k rpms??You need to go with a billet rod.I like the Lunati Pro Billets and ive seen the Howards to big hp as well.
EDIT sorry i just realized i didnt evan answer to question you asked.
EDIT sorry i just realized i didnt evan answer to question you asked.
Originally Posted by SuperZ
900 rwhp and over 7k rpms??You need to go with a billet rod.I like the Lunati Pro Billets and ive seen the Howards to big hp as well.
EDIT sorry i just realized i didnt evan answer to question you asked.
EDIT sorry i just realized i didnt evan answer to question you asked.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by red90cobra
what kind of power are you making?
Originally Posted by SuperZ
900 rwhp and over 7k rpms??You need to go with a billet rod.I like the Lunati Pro Billets and ive seen the Howards to big hp as well.
EDIT sorry i just realized i didnt evan answer to question you asked.
EDIT sorry i just realized i didnt evan answer to question you asked.
Originally Posted by red90cobra
so can anyone recommend a length
You have a 4.04 bore in the block...But yet the pistons are a 4.030 for a 408 correct? A 408 uses a 4" stroker crank and I believe the piston pin is offset a little so that piston would only work with the stroker crank...Correct me if Im wrong.
It looks like you are building a 371CI motor if you do get to use that piston you have.
Originally Posted by 1936FordPU
Let me get this straight here..
You have a 4.04 bore in the block...But yet the pistons are a 4.030 for a 408 correct? A 408 uses a 4" stroker crank and I believe the piston pin is offset a little so that piston would only work with the stroker crank...Correct me if Im wrong.
It looks like you are building a 371CI motor if you do get to use that piston you have.
You have a 4.04 bore in the block...But yet the pistons are a 4.030 for a 408 correct? A 408 uses a 4" stroker crank and I believe the piston pin is offset a little so that piston would only work with the stroker crank...Correct me if Im wrong.
It looks like you are building a 371CI motor if you do get to use that piston you have.
Originally Posted by 1936FordPU
Let me get this straight here..
You have a 4.04 bore in the block...But yet the pistons are a 4.030 for a 408 correct? A 408 uses a 4" stroker crank and I believe the piston pin is offset a little so that piston would only work with the stroker crank...Correct me if Im wrong.
It looks like you are building a 371CI motor if you do get to use that piston you have.
You have a 4.04 bore in the block...But yet the pistons are a 4.030 for a 408 correct? A 408 uses a 4" stroker crank and I believe the piston pin is offset a little so that piston would only work with the stroker crank...Correct me if Im wrong.
It looks like you are building a 371CI motor if you do get to use that piston you have.
I believe it's do able with the stroker piston. here the thread
https://ls1tech.com/forums/generation-iv-internal-engine/524413-forged-boost-6-0l-364-w-6-3-rods-402-pistons-impressions.html