Where can I get a catch can?
Thread Starter
10 Second Club
iTrader: (4)
Joined: Aug 2004
Posts: 3,576
Likes: 0
From: Southern Maryland
Where can I get a catch can? From what I've heard, I need a catch can!
Is there any vendors here who can help me?
How difficult will it be to install?
And how much do they typically run?
Is there any vendors here who can help me?
How difficult will it be to install?
And how much do they typically run?
TECH Regular
Joined: Jan 2004
Posts: 496
Likes: 0
From: GARDEN GROVE, CA
AMW is a sponsor here but the price is extremely high. I got one before the price increase and it works so, so. Still having problems with oil getting by it. You can get one on Ebay for cheap.
Thread Starter
10 Second Club
iTrader: (4)
Joined: Aug 2004
Posts: 3,576
Likes: 0
From: Southern Maryland
Originally Posted by ricethis98
easiest thing in the world to make. go to home depot and get a small air compressor filter and housing and some hose and clamps. looks just like those over priced catch cans, and mine worked amazingly
I've heard about one once a long time ago on a turbo import car. I really didn't pay much attention either because it was an import car. I'm not really a fan of the imports if you know what I mean.
So, EXACTLY what parts do I need to get to make this?
And how do I make one?
Lastly, how do I install it?
You guys are gonna have to educate my ignorant ***!!!!!
You can get our products from the following sponsors:
SDPC
Thunder
Futral
TSP
West Coast Cylinder Heads
TEA
Our oil/air separators can be made to order to fit a variety of applications.
SDPC
Thunder
Futral
TSP
West Coast Cylinder Heads
TEA
Our oil/air separators can be made to order to fit a variety of applications.
Thread Starter
10 Second Club
iTrader: (4)
Joined: Aug 2004
Posts: 3,576
Likes: 0
From: Southern Maryland
Originally Posted by Cstraub
You can get our products from the following sponsors:
SDPC
Thunder
Futral
TSP
West Coast Cylinder Heads
TEA
Our oil/air separators can be made to order to fit a variety of applications.
SDPC
Thunder
Futral
TSP
West Coast Cylinder Heads
TEA
Our oil/air separators can be made to order to fit a variety of applications.
Trending Topics
Originally Posted by 00Vette
How much do they typically cost for the LS1? (I have a 2000 C5)
ebay is where i got mine, its a really nice unit for the price, was about $40 when I got mine
http://cgi.ebay.com/ebaymotors/NRG-O...spagenameZWD1V
http://cgi.ebay.com/ebaymotors/NRG-O...spagenameZWD1V
quoted from the guy that told me how to make mine:
peice of cake
After the PCV and before the intake I used a 3/8 fuel line with a Sears/Home Depot/Wal-mart purchased inline oil separator (Campbell ? ) that is found in the air compressor section and is priced at $7-9. I plumbed it in with brass barbs and 3/8 line, made sure the bowl was pointed down, zip-tied it to something, and she was good Total cost @20 and the capacity isnt that big, but hey, you can empty her a little more often rather than pay $160. PS, i didnt have mine long enough, but the white stone like filter element MAY stop up in time. heck, $9 every 15Kmiles and replace it
Jegs $39.95 can't beat it for the money just installed one on my Vette..
http://www.jegs.com/webapp/wcs/store...tegoryId=84458
JEGS High Performance - JEG'S Air Oil Separator
John
http://www.jegs.com/webapp/wcs/store...tegoryId=84458
JEGS High Performance - JEG'S Air Oil Separator
John
Thread Starter
10 Second Club
iTrader: (4)
Joined: Aug 2004
Posts: 3,576
Likes: 0
From: Southern Maryland
This is just what I needed. I will compare the one on e-bay with the one from Jegs.
This will definately help!
Can anyone provide a picture of where they installed it on there LS1? That way me and others will know where EXACTLY to install it?
This will definately help!
Can anyone provide a picture of where they installed it on there LS1? That way me and others will know where EXACTLY to install it?
Really just any spot that you have room or care to put it. Some people run the hose all the way to the other side of the car. Just depends on how long of a hose you buy and where you want to put it.
Originally Posted by 00Vette
Can anyone provide a picture of where they installed it on there LS1? That way me and others will know where EXACTLY to install it?
Ditto....this would be very helpful..
John
