Nastiest cam....
#1
TECH Enthusiast
Thread Starter
Join Date: Apr 2005
Location: Middletown, DE
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
Nastiest cam....
Hey guys i need a little help, i have about 6000 to spend on my stock 98 z28 A4...
Whats the biggest cam i can get.. can i get full bolt ons, a h/c stall, and install for around 6 or under or am i just dumb for thinking it? and can you guys guide me in the right direction
Whats the biggest cam i can get.. can i get full bolt ons, a h/c stall, and install for around 6 or under or am i just dumb for thinking it? and can you guys guide me in the right direction
#3
TECH Senior Member
iTrader: (18)
Join Date: Jun 2002
Location: NW Houston, TX
Posts: 10,036
Likes: 0
Received 0 Likes
on
0 Posts
Your car as a whole or you (seeing as your asking this question) isnt set up to handle the nastiest cam out there. Stock botom ends are good to 7k, but some of the nastiest cams ive seen out there for a 346 will want to go to 8k. Only reason most of them go to only 8k is because I think thats as high as the stock PCM can control the motor to.
#4
TECH Addict
iTrader: (6)
Get an ms3 with dual springs/hardened pushrods/titanium retainers/ls2 timing chain, ls6 intake, ported TB, underdrive pulley, 4000 stall, tranny cooler, pacesetter headers/ory, cutout, magnaflow catback, adj panhard rod/LCA's/sfc's, and a tune. Should be over 400 rwhp and with a sticky tire you should see low 12's high 11's
#5
TECH Enthusiast
iTrader: (12)
Join Date: Sep 2004
Location: Danville, VA
Posts: 684
Likes: 0
Received 0 Likes
on
0 Posts
^i like his thinking...
if you don't care about driving it on the street, you should get a TRex cam. i think that cars with TRex cams are go faster than the MagicStick (MS) cars.
if you don't care about driving it on the street, you should get a TRex cam. i think that cars with TRex cams are go faster than the MagicStick (MS) cars.
#6
TECH Enthusiast
Thread Starter
Join Date: Apr 2005
Location: Middletown, DE
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
Its a DD, by nastiest cam i meant nastiest one my car can handle.. what heads will go with a t-rex cam? and 98z28 mass, that sounds like alot of ****, that will all be under 6000?
#7
Originally Posted by MonsterZ28
Its a DD, by nastiest cam i meant nastiest one my car can handle.. what heads will go with a t-rex cam? and 98z28 mass, that sounds like alot of ****, that will all be under 6000?
start reading
Trending Topics
#8
Launching!
iTrader: (3)
Join Date: Aug 2006
Location: Michigan
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
i talked to thunder racing you don't want the T-Rex for daily driving.... i have a 98 A4 and they said i need a min. of a 4400 stall and if your not going to be taking it to 7000 rpm its pointless and it won't be fun driving on the streets after a while
#9
TECH Junkie
iTrader: (13)
Join Date: Sep 2004
Location: Fort Myers, FL.
Posts: 3,857
Likes: 0
Received 0 Likes
on
0 Posts
search is your friend. If you drive it as a DD you really don't want to go huge. Look at some of the cams i nthe 230-240 range and you will see soem amazing numbers with smaller cams. Bigger is not always better, especially for a A4.
#11
TECH Addict
iTrader: (9)
Originally Posted by 98Z28MASS
Get an ms3 with dual springs/hardened pushrods/titanium retainers/ls2 timing chain, ls6 intake, ported TB, underdrive pulley, 4000 stall, tranny cooler, pacesetter headers/ory, cutout, magnaflow catback, adj panhard rod/LCA's/sfc's, and a tune. Should be over 400 rwhp and with a sticky tire you should see low 12's high 11's
Um yeah I agree
#13
9 Second Club
iTrader: (8)
Join Date: Sep 2005
Location: Woodland WA
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 98Z28MASS
Get an ms3 with dual springs/hardened pushrods/titanium retainers/ls2 timing chain, ls6 intake, ported TB, underdrive pulley, 4000 stall, tranny cooler, pacesetter headers/ory, cutout, magnaflow catback, adj panhard rod/LCA's/sfc's, and a tune. Should be over 400 rwhp and with a sticky tire you should see low 12's high 11's
#17
TECH Senior Member
Originally Posted by 98Z28MASS
Get an ms3 with dual springs/hardened pushrods/titanium retainers/ls2 timing chain, ls6 intake, ported TB, underdrive pulley, 4000 stall, tranny cooler, pacesetter headers/ory, cutout, magnaflow catback, adj panhard rod/LCA's/sfc's, and a tune. Should be over 400 rwhp and with a sticky tire you should see low 12's high 11's
I saw high 11's with a 224 cam (3600 stall) and once I added heads i was in the 11.3 range.
#19
TECH Enthusiast
iTrader: (6)
Join Date: Nov 2005
Location: south dakota
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1slow98Z28
i talked to thunder racing you don't want the T-Rex for daily driving.... i have a 98 A4 and they said i need a min. of a 4400 stall and if your not going to be taking it to 7000 rpm its pointless and it won't be fun driving on the streets after a while