please help!!! i think have wrong push rods or new lifter problems
Thread Starter
TECH Enthusiast
Joined: Nov 2001
Posts: 603
Likes: 0
From: Houston
please help!!! i think have wrong push rods or new lifter problems hey guys,
i just put gtp stage 2 heads on my car.the car has a cam (b1) in it and all the bolt ons.the heads were milled 30thousanths. i also put new lifters in.(comp cam 875-16s)i had in the car before heads were the hardened pushrods from crane which were the same height as the stock ones. the car is making a sound like rockers at idle, but it comes and goes.the push rod im using is a 7350 and the other is a 7400. im was wondering if the pushrod i have in there is wrong and thats why its making that noise!!!please any help or suggestions would be great.
thanks
wayne
<small>[ April 21, 2002, 01:38 PM: Message edited by: 2000SS ]</small>
i just put gtp stage 2 heads on my car.the car has a cam (b1) in it and all the bolt ons.the heads were milled 30thousanths. i also put new lifters in.(comp cam 875-16s)i had in the car before heads were the hardened pushrods from crane which were the same height as the stock ones. the car is making a sound like rockers at idle, but it comes and goes.the push rod im using is a 7350 and the other is a 7400. im was wondering if the pushrod i have in there is wrong and thats why its making that noise!!!please any help or suggestions would be great.
thanks
wayne
<small>[ April 21, 2002, 01:38 PM: Message edited by: 2000SS ]</small>
Re: please help!!! i think have wrong push rods or new lifter problems You are using 7.35's correct?
Do you know the base cirlce on the cam?
I am guessing you need to use 7.400" push rods. I do and I have heads/cam.
My heads were milled 0.030" and my base circle radius is 0.030" less on the hammer cam so I just stuck with the stock lenght. I have a quite setup.
ERic
Do you know the base cirlce on the cam?
I am guessing you need to use 7.400" push rods. I do and I have heads/cam.
My heads were milled 0.030" and my base circle radius is 0.030" less on the hammer cam so I just stuck with the stock lenght. I have a quite setup.
ERic
Re: please help!!! i think have wrong push rods or new lifter problems You are running 7.350 pushrods? Sounds right to me unless the base circle is different from what I remember.
Thread Starter
TECH Enthusiast
Joined: Nov 2001
Posts: 603
Likes: 0
From: Houston
Re: please help!!! i think have wrong push rods or new lifter problems </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Pro Stock John:
<strong>You are running 7.350 pushrods? Sounds right to me unless the base circle is different from what I remember.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">ok!
but what about the lifters!the noise comes and goes. i cranked my car up this morning before i left for work around noon,and it didnt do it but when i got on the freeway about 3miles it did it again for about 5 seconds and it goes away. im thinking its the lifters.it also made the noise yesterday when i cranked it up.???????????
thanks wayne
<strong>You are running 7.350 pushrods? Sounds right to me unless the base circle is different from what I remember.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">ok!
but what about the lifters!the noise comes and goes. i cranked my car up this morning before i left for work around noon,and it didnt do it but when i got on the freeway about 3miles it did it again for about 5 seconds and it goes away. im thinking its the lifters.it also made the noise yesterday when i cranked it up.???????????
thanks wayne
TECH Fanatic
Joined: Nov 2001
Posts: 1,986
Likes: 1
From: Centrifugal City
Re: please help!!! i think have wrong push rods or new lifter problems Your pushrods sound right. You probably need them a bit shorter actually. NOT longer.
Comp R's are notoriously loud. Your car should sound like a sewing machine now, esp. with the hood up.
Comp R's are notoriously loud. Your car should sound like a sewing machine now, esp. with the hood up.
TECH Resident
Joined: Nov 2001
Posts: 768
Likes: 0
From: houston
Re: please help!!! i think have wrong push rods or new lifter problems how is that beast running wayne...
sounds like you have the right pushrod in it.
should make just a bit of noise.
call me some time bud, i gots a questions i need to axe you..
steve frank
sounds like you have the right pushrod in it.
should make just a bit of noise.
call me some time bud, i gots a questions i need to axe you..
steve frank
Trending Topics
Thread Starter
TECH Enthusiast
Joined: Nov 2001
Posts: 603
Likes: 0
From: Houston
Re: please help!!! i think have wrong push rods or new lifter problems </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by steve:
<strong>how is that beast running wayne...
sounds like you have the right pushrod in it.
should make just a bit of noise.
call me some time bud, i gots a questions i need to axe you..
steve frank</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">left you a message this morning!!!steve please call me.281-286-5379work
<strong>how is that beast running wayne...
sounds like you have the right pushrod in it.
should make just a bit of noise.
call me some time bud, i gots a questions i need to axe you..
steve frank</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">left you a message this morning!!!steve please call me.281-286-5379work
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
TECH Enthusiast
Joined: Nov 2001
Posts: 603
Likes: 0
From: Houston
Re: please help!!! i think have wrong push rods or new lifter problems </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by wizkid:
<strong>You are using 7.35's correct?
Do you know the base cirlce on the cam?
I am guessing you need to use 7.400" push rods. I do and I have heads/cam.
My heads were milled 0.030" and my base circle radius is 0.030" less on the hammer cam so I just stuck with the stock lenght. I have a quite setup.
ERic</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">i called mti this morning and i have the b1 cam and they told me the base circle is 1.50 and stock is 1.55.
this is diving me crazy!!!!it comes and goes
<strong>You are using 7.35's correct?
Do you know the base cirlce on the cam?
I am guessing you need to use 7.400" push rods. I do and I have heads/cam.
My heads were milled 0.030" and my base circle radius is 0.030" less on the hammer cam so I just stuck with the stock lenght. I have a quite setup.
ERic</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">i called mti this morning and i have the b1 cam and they told me the base circle is 1.50 and stock is 1.55.
this is diving me crazy!!!!it comes and goes
Thread Starter
TECH Enthusiast
Joined: Nov 2001
Posts: 603
Likes: 0
From: Houston
Re: please help!!! i think have wrong push rods or new lifter problems </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Raughammer:
<strong>.....bad lifter from Comp. Have you called them yet?
JC</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">im calling them now.
<strong>.....bad lifter from Comp. Have you called them yet?
JC</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">im calling them now.
Thread Starter
TECH Enthusiast
Joined: Nov 2001
Posts: 603
Likes: 0
From: Houston
Re: please help!!! i think have wrong push rods or new lifter problems well i tried changing the push rods last night and the same noise is there, maybe the 875-16 lifters bleed down and make a little noise!!!
i going crazy trying to figure this out!!!
i going crazy trying to figure this out!!!
On The Tree
Joined: Mar 2002
Posts: 115
Likes: 0
From: fort worth, texas
Re: please help!!! i think have wrong push rods or new lifter problems are they fast bleed lifters? i have installed a set of comp cam's fast bleed lifters in my old truck's engine and they made a hell of a noise at idle. does the noise go away about 1500 to 2000 rpm?
