Chicago Crew UnderBoss

iTrader: (1)

Due to unforseen circumstances, my stroker project may be on hold for a year or two, so i have decided to upgrade my heads and cam package to the baddest azz set up that $ can buy. I have a 98 C5 A4 with FLP Tranny and running the aggressive Yank PT 4000 stall with 3.73 Getrags.

I have decided to use MTIs Stage II LS6 Heads. Right know i am leaning towards going with MTI's radical x1 cam with specs of 230/227, .591 lift on a 112 lope.

Given my stall converter and my mods listed below, is their another cam that you believe will get me closer to that highly coveted 10 second time slip. One issue is tha i do not want to have to fly cut the pistons and a huge cam like the x1 is about as big as i can go with flycutting pistons. Any suggestions about any other cam that you believe will out perform the x1 in the 1/4 mile to be used with my MTI stage II LS6 heads.

THanks for all input.

MTI 427 C5 Roadster, soon to be MTI 500HP C5 Roadster.

<small>[ November 20, 2002, 10:34 PM: Message edited by: MTI 427 C5 Roadster ]</small>

Robzilla

iTrader: (1)

i hear the TR230/224 is pretty bad ***, but the x-1 will probably still be better.

SIR

<img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
427!!!!!!!!!!!! <img border="0" alt="[devil]" title="" src="graemlins/gr_devil.gif" /> <img border="0" alt="[devil]" title="" src="graemlins/gr_devil.gif" />

or H/C with roller!!!! <img border="0" alt="[hail]" title="" src="graemlins/gr_hail.gif" /> <img border="0" alt="[hail]" title="" src="graemlins/gr_hail.gif" />

Yes I am no help!!!! ahahahha

The X1 cam sounds fine though...
<img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" /> <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" /> <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

Raughammer

The X1 should do you fine...

Colonel

X1 or go solid lift.

Chicago Crew UnderBoss

iTrader: (1)

Gentleman:

Thanks for all the input here. I am pleased to state that i was albe to deal with the issues presented by unforseen circumstance and that I am back full steam ahead with my MTI 427 Z07 LQ4 Superstroker! <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" /> <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" /> <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" /> <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />

MTI 427 Roadster <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" /> <img border="0" alt="[Corvette]" title="" src="graemlins/corvette.gif" />

Colonel

<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

SIR

best choice!!! <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

<img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" /> <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" /> <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
now walk away until the fed-ex man drops off the engine <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

10secondZ

iTrader: (24)

i like this one <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> it's a futeral motorsports custom grind..im going with this one very soon..sounds like a winner to me 226*/230* .576"/.580" 114 lobe sep.
but now that your project is a go again...SOLID ROLLER!! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />