View Poll Results: which heads are the best
afr
![](https://ls1tech.com/forums/images/polls/bar2-l.gif)
![](https://ls1tech.com/forums/images/polls/bar2.gif)
![](https://ls1tech.com/forums/images/polls/bar2-r.gif)
![](https://ls1tech.com/forums/clear.gif)
136
46.26%
et performance
![](https://ls1tech.com/forums/images/polls/bar3-l.gif)
![](https://ls1tech.com/forums/images/polls/bar3.gif)
![](https://ls1tech.com/forums/images/polls/bar3-r.gif)
![](https://ls1tech.com/forums/clear.gif)
54
18.37%
other brand
![](https://ls1tech.com/forums/images/polls/bar4-l.gif)
![](https://ls1tech.com/forums/images/polls/bar4.gif)
![](https://ls1tech.com/forums/images/polls/bar4-r.gif)
![](https://ls1tech.com/forums/clear.gif)
104
35.37%
Voters: 294. You may not vote on this poll
Best Aftermarket Heads?
#42
On The Tree
Join Date: May 2006
Location: 60 mi SE of Melbourne, Australia
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I ordered ETP 215s from Fraser at SpeedInc a week or so ago and they'll be fitted by mid-January. I'll know how good they are then, I 'spose. The AFR and ETs were both highly recommended and for me, it came down to the fact that ETs could ship before Christmas.
I'm hoping to get a good pick-up in power and torque from low - high range and I'll probably keep the rev limiter at 6800rpms for my set-up. We'll see how it goes.
Cheers,
Macca
I'm hoping to get a good pick-up in power and torque from low - high range and I'll probably keep the rev limiter at 6800rpms for my set-up. We'll see how it goes.
Cheers,
Macca
#43
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I got a set of ET's from MPH. Went with them cause could bump the compression up a bit more with my cam and not worry about PTV issues and quick turn around on heads. We'll see how they perform in the comming months, flows seem really good.
#48
TECH Resident
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
go look at the flowsheets
http://www.motorsporttech.com/fbody_engine01.asp
they are a little better than AFR 205cc heads but not as good as ET Performance 215cc heads. But the S.A.M. racing heads flow 408cfm! But I dont know at what lift. I do know that they are using a 278/290 solid roller cam with .915/.820 lift...so it could be higher.
http://www.motorsporttech.com/fbody_engine01.asp
they are a little better than AFR 205cc heads but not as good as ET Performance 215cc heads. But the S.A.M. racing heads flow 408cfm! But I dont know at what lift. I do know that they are using a 278/290 solid roller cam with .915/.820 lift...so it could be higher.