Best Possible Heads For X1
Best Possible Heads For X1 I know this is a little bass ackwards, but what heads would work the best with an X1 cam? I've noticed a few guys running ported 5.3's. How about milled AFR's? Just curious what the experts think. Discuss..
2000 Z28 A4, old school MTI stage 2 LS1 heads, X1 cam, LS6 intake, TR long tubes, Borla, TCI4400, 3.73 gears, QA1's, dyno tune by Chris at ECS, 403.7rwhp 397.8rwtq, 11.19@120.30
if i do go with the X1 which is what im pretty much leaning towards, im gonna go with the MTI 2E 5.3 heads. cuz i hear the X1 will be better combo with the 5.3!! i seen one guy with afr 205/x1. also there was a guy with TSP terminator heads/x1 making sick power.
Yes, this is my current setup. I was just wondering if 5.3's, or milled AFR's, or whatever would work better with the X1. I got my heads from MTI in 2002, before they called them stage 2E's. I know cylinder head technology has come a long way since then, so I wanted to know if there was a better option to go along with this cam.
BTW, I know how to use the search function. From what I can tell, this EXACT topic hasn't been discussed in a while.
BTW, I know how to use the search function. From what I can tell, this EXACT topic hasn't been discussed in a while.
Trending Topics
The PRC 5.3l stage 2.5 head is defniately worth looking into. I know MTI has posted some good dyno results with the X1 & PRC heads. You can buy PRC heads from us or from MTI, either way you should see about a 45hp gain on the dyno! We currently have a big special going on PRC 5.3l heads & they are in stock!!
http://www.texas-speed.com/shop/item...id=84&catid=40
http://www.texas-speed.com/shop/item...id=84&catid=40
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo The PRC 5.3l stage 2.5 head is defniately worth looking into. I know MTI has posted some good dyno results with the X1 & PRC heads. You can buy PRC heads from us or from MTI, either way you should see about a 45hp gain on the dyno! We currently have a big special going on PRC 5.3l heads & they are in stock!!
http://www.texas-speed.com/shop/item...id=84&catid=40
http://www.texas-speed.com/shop/item...id=84&catid=40
Definately over a stock casting. They can be milled or you can run a thinner gaskets 
Jason
Jason
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
hey bad2000z i saw your from the binghamton area...im not far from there just down in PA my buddy(has a 96 formy WS6) and i(02ta WS6) go to the barnes and noble in the towns square mall in the summer...you ever make it there? 
Seth never makes it out to barnes & Noble....maybe this year we can get him out there! I go there once in a while...what color are yours and your buddys cars?
you cant miss our cars...here is the link to minehttp://www.cardomain.com/ride/2485079
and here is the link to my buddies....http://www.cardomain.com/ride/2598948
hes getting some new rims for it this spring so that may be different by then but then again how many 96 formula WS6 do you see!!!!
yea that would be awesome i never really see any fbodys there
you cant miss our cars...here is the link to minehttp://www.cardomain.com/ride/2485079
and here is the link to my buddies....http://www.cardomain.com/ride/2598948
hes getting some new rims for it this spring so that may be different by then but then again how many 96 formula WS6 do you see!!!!
you cant miss our cars...here is the link to minehttp://www.cardomain.com/ride/2485079
and here is the link to my buddies....http://www.cardomain.com/ride/2598948
hes getting some new rims for it this spring so that may be different by then but then again how many 96 formula WS6 do you see!!!!
Im from Montrose and he is a few min. down in Nicholson...and where abouts you guys from? and websites with the cars?
That and I see you have a New Era Tune...i was thinkin about goin up there to have a heads and cam swap done. How did you like that place?
That and I see you have a New Era Tune...i was thinkin about goin up there to have a heads and cam swap done. How did you like that place?
Im a few miles east of Binghamton. I don't have any website for my car, and I'm not sure Seth does either...but he'll have to answer that question. Ill PM you a few pics of my car, maybe you have seen it before.
New Era is awesome, they did my cam swap for me as well because I didn't have the time or ambition to do it myself. I would recomend them to anyone. I have a thread somewhere in the dyno section about my experience with New Era and the results along with my mods and video clip of my car with the cam installed.
