Remove a Camaro SS 00 LS1 Engine from Top or Bottom ???
#23
TECH Resident
iTrader: (4)
Join Date: Jan 2007
Location: Mass
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
maybe this will help you
http://www.michiganspeed.com/enginepull/index.html
http://ken.lowrance.com/Projects/Hea...ineRemoval.htm
http://www.michiganspeed.com/enginepull/index.html
http://ken.lowrance.com/Projects/Hea...ineRemoval.htm
#25
12 Second Club
iTrader: (2)
Join Date: Dec 2003
Location: Osceola IN
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
ive never dropped it out the bottom, but i have pulled one out top with auto trans still on, hood on, intake was removed and motor mounts were removed. radiator and condesor out helped
#27
Teching In
Thread Starter
Join Date: Jan 2008
Location: Hialeah, FL.
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
maybe this will help you
http://www.michiganspeed.com/enginepull/index.html
http://ken.lowrance.com/Projects/Hea...ineRemoval.htm
http://www.michiganspeed.com/enginepull/index.html
http://ken.lowrance.com/Projects/Hea...ineRemoval.htm
I'll be nice if someone make a nice "How To" Guide to do it right...
Thanks for all your help guys !!!
.
#28
10 Second Club
iTrader: (1)
depending on a few things my buddy and I can have mine out in about 2 hours or less.
I screwed up when I put my N20 on and ran the wires through the grommet by the pcm <which made it impossible to pull the engine harness out. The n20 wires are getting moved now so I don't have to leave the harness on the body again.
Auto's are easier as long as the trans lines come off the rad easy. You don't have to pull the console on them.
I'm trying to get a hoist. Then I will pull them out just to change cam/springs
I screwed up when I put my N20 on and ran the wires through the grommet by the pcm <which made it impossible to pull the engine harness out. The n20 wires are getting moved now so I don't have to leave the harness on the body again.
Auto's are easier as long as the trans lines come off the rad easy. You don't have to pull the console on them.
I'm trying to get a hoist. Then I will pull them out just to change cam/springs
#33
TECH Fanatic
iTrader: (1)
maybe this will help you
http://www.michiganspeed.com/enginepull/index.html
http://www.michiganspeed.com/enginepull/index.html
#34
Teching In
Thread Starter
Join Date: Jan 2008
Location: Hialeah, FL.
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts