Cammed auto guys.. Step inside
#21
Banned
Thread Starter
Join Date: Sep 2007
Location: Chandler, Az
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
#24
11 Second Club
iTrader: (19)
Join Date: May 2006
Location: Whidbey Island, Wa.
Posts: 965
Likes: 0
Received 0 Likes
on
0 Posts
^^^^Strange..
There are hundreds of people with stock bottom ends making 400+. Hell even 500+ with N20, and I don't see them BREAKING pistons at all...
Its usually bearings that I see go, or valves that come in contact with the piston.
There are hundreds of people with stock bottom ends making 400+. Hell even 500+ with N20, and I don't see them BREAKING pistons at all...
Its usually bearings that I see go, or valves that come in contact with the piston.
#28
TECH Fanatic
Join Date: Feb 2004
Location: Lexington, KY
Posts: 1,259
Likes: 0
Received 0 Likes
on
0 Posts
Get a stall before a cam. And you will get as many answers to your question as you get responses. Some people think a TREX is good for a DD. To me it's too much.... It all depends on how big a cam your willing to live with.
#34
#36
11 Second Club
iTrader: (3)
Join Date: Feb 2008
Location: Powhatan
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
what yall think
I have a ws6 dd w/ 104...very bad lifter knock...and trans just went...so i am swopin the trans w/ an 02 a4 built one and getting a 3200 fuddle stall for it(starting w/ 32 may go 34 later) and i want to get rid of the knock so i was going to do scorpion rockers, time chain, bearing, oil pump, stall, tune , thermo 160, and a water pump with a cam...basically top end replacement. I want texas speed 228/114lsa cam pckg...does this sound good??
keeping in mind ...to do this i need a loan cause i am poor...damn it
Also i dont want anything too big and I want to keep some mpg...i have a lead foot...only get 200-220 for 12.5gallons with lt headers, ls6intake, pp tb, slp lid/maf, slp lm...help????
keeping in mind ...to do this i need a loan cause i am poor...damn it
Also i dont want anything too big and I want to keep some mpg...i have a lead foot...only get 200-220 for 12.5gallons with lt headers, ls6intake, pp tb, slp lid/maf, slp lm...help????
#37
I have a ws6 dd w/ 104...very bad lifter knock...and trans just went...so i am swopin the trans w/ an 02 a4 built one and getting a 3200 fuddle stall for it(starting w/ 32 may go 34 later) and i want to get rid of the knock so i was going to do scorpion rockers, time chain, bearing, oil pump, stall, tune , thermo 160, and a water pump with a cam...basically top end replacement. I want texas speed 228/114lsa cam pckg...does this sound good??
keeping in mind ...to do this i need a loan cause i am poor...damn it
Also i dont want anything too big and I want to keep some mpg...i have a lead foot...only get 200-220 for 12.5gallons with lt headers, ls6intake, pp tb, slp lid/maf, slp lm...help????
keeping in mind ...to do this i need a loan cause i am poor...damn it
Also i dont want anything too big and I want to keep some mpg...i have a lead foot...only get 200-220 for 12.5gallons with lt headers, ls6intake, pp tb, slp lid/maf, slp lm...help????