TEA headed cars..... post your dyno #s inside
#2
10 Second Club
iTrader: (24)
Re: TEA headed cars..... post your dyno #s inside
My number's arent that great..but I have a feeling it's the cam in my car..Anyway's I have all the bolt on's except ls6 intake..through my A4 with 3500 stall,steel driveshaft,through the muffler's did 376 RWHP with no tuning..getting LS6 intake,true dual's with x-pipe,aluminum driveshaft,swapping my cam for the G5X-2,and tuning..should hit 400rwhp and around 390rwt..they are great head's..and i will post my result's soon...Later,
Carter
Carter
#4
TECH Senior Member
iTrader: (4)
Re: TEA headed cars..... post your dyno #s inside
In the sig
408 rwhp thru SLP dual/dual
418 rwhp thru cut out, 5,900 rpm
224 XE-R cam and TEA 5.3 Stage 2 heads
I would like to know if anyone had their 5.3's flow tested with the LS6 intake. If so please PM me with the results. My heads were flow tested with the LS6 intake and I can share data etc.
I would like to see what the TEA heads with the "bigger" NOS exhaust port do.
408 rwhp thru SLP dual/dual
418 rwhp thru cut out, 5,900 rpm
224 XE-R cam and TEA 5.3 Stage 2 heads
I would like to know if anyone had their 5.3's flow tested with the LS6 intake. If so please PM me with the results. My heads were flow tested with the LS6 intake and I can share data etc.
I would like to see what the TEA heads with the "bigger" NOS exhaust port do.
#5
TECH Junkie
Join Date: Jan 2002
Location: At the office
Posts: 3,015
Likes: 0
Received 0 Likes
on
0 Posts
Re: TEA headed cars..... post your dyno #s inside
New dyno numbers coming shortly with fresh plugs (mine were shot) and YT rockers. I'm hoping for 445rwhp/405rwtq.
#6
LS1TECH Sponsor
Re: TEA headed cars..... post your dyno #s inside
Ron how many times do I have to tell you
Stay OFF the damn internet
P.S. Josh Who? get that thing running what are his great TEA numbers
Stay OFF the damn internet
P.S. Josh Who? get that thing running what are his great TEA numbers
Trending Topics
#9
Launching!
iTrader: (4)
Join Date: Jul 2003
Location: warner robins GA
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Re: TEA headed cars..... post your dyno #s inside
on superflow dyno 400 rwhp 380rwt.on tea dyno 399.3rwhp 378rwtq. Was wondering if superflow dynos dyno low like mustang dynos?????.New cam being installed tonight 591int 601ex 230in 236ex on a 110lsa
Stg1.5 tea 5.3,c2 cam,ls6 intake,hooker long tubes,x pipe duels 3in pipe,spec stg 3 clutch,lid,
Stg1.5 tea 5.3,c2 cam,ls6 intake,hooker long tubes,x pipe duels 3in pipe,spec stg 3 clutch,lid,
#14
TECH Apprentice
Join Date: Nov 2001
Location: Midland Texas
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Re: TEA headed cars..... post your dyno #s inside
TEA 5.7 1.5s with a 224/224-581/581 112 ls. Long tubes x-pipe no cats and a pully as well as most bolt ons
414 rwhp corrected 397 tq.
This is on a 2001 Vette.
414 rwhp corrected 397 tq.
This is on a 2001 Vette.
#15
TECH Resident
iTrader: (13)
Join Date: Apr 2002
Location: South Elgin
Posts: 865
Likes: 0
Received 0 Likes
on
0 Posts
Re: TEA headed cars..... post your dyno #s inside
Tea stage 2 5.3 liter
comp xer 228/228 .581/.581 112
ls6 intake
mac headers
3 true duals
A4
ford 9 inch/ 35 spline axles/ spool
26/1150/15 ET Streets
402 rwhp
377 rwtq
comp xer 228/228 .581/.581 112
ls6 intake
mac headers
3 true duals
A4
ford 9 inch/ 35 spline axles/ spool
26/1150/15 ET Streets
402 rwhp
377 rwtq
#16
TECH Apprentice
Join Date: Jul 2003
Location: bronx ny
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Re: TEA headed cars..... post your dyno #s inside
does any one have graphs we can look at, I would like to see the curves, especially yours phillip, you made some mad power, can every one list there sigs to including rear and gears and steel or aluminum flywheel. Good job ls1bu
#17
TECH Resident
Join Date: Jan 2002
Location: In front of my computer
Posts: 922
Likes: 0
Received 0 Likes
on
0 Posts
Re: TEA headed cars..... post your dyno #s inside
Tea stage 2 5.3 liter
comp xer 228/228 .581/.581 112
ls6 intake
mac headers
3 true duals
A4
ford 9 inch/ 35 spline axles/ spool
26/1150/15 ET Streets
402 rwhp
377 rwtq
comp xer 228/228 .581/.581 112
ls6 intake
mac headers
3 true duals
A4
ford 9 inch/ 35 spline axles/ spool
26/1150/15 ET Streets
402 rwhp
377 rwtq
Thanks, Stu
#19
TECH Apprentice
Join Date: Jul 2003
Location: bronx ny
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Re: TEA headed cars..... post your dyno #s inside
Thanks vince, whats the specs on the fm-9 cam, looks like you made more power with stg1 heads than alot of people make with stg2's. did you upgrade to stg2 or are they still stg1