Anybody have an MS4?
#1
Anybody have an MS4?
are any of you guys running an MS4? and if so, how do you like it? i just got mine a couple days ago with a 111 lsa. just waiting on the 4k stall to get in so i can start the installation. just wondering how you guys like it, or dont like it.
#2
its a great cam, i have a yank ss4000 stall as well. its a little hard to cruise if u are under 2000rpms, its bucks a little bit. i went 12.2 @115 on a street tires, wit no first gear. i love the cam its sounds awesome and is pretty nasty when u get on it. good luck. u wont be disappointed.
#4
that sounds awsome, i cant wait to get it in my car. i was going to get a yank stall but i just ordered the vigilante from tsp since i ordered most everything else from them. why didnt you have first gear when you ran it?
#6
ms4 cam
I have a custom grind that is nearly identical to the ms4 cam. It lives between 4-7000 rpm. It idles rough but really sings when it comes on. I really like this cam in my car because it is built for roadcourse racing...where you have it above 4500 RPM all day long. My car is a Porsche 914 (highly modified with full cage and wide flairs & tires, etc. It weighs only 2400lbs...so it never feels like it is going to fall on it's face below 4000 RPM. The original engine was a flat four aircooled VW/Porsche 2.0 motor. My engine puts out 424 RWHP. You will love this cam!
Trending Topics
#9
im really getting a little worried that this cam and stall is going to be to much. the more i read about it the more im starting to think that. but i could end up loving it, i dont know.
#11
What are your expectations from this setup?
#13
I just installed a MS3 on a 114, it is nice and drives fine. I'm untuned and haven't gotten on it yet, but does fine with no bogging in 6th gear for me. Driving around @1500rpm with no problem unlike what alot of people have said. Still need to be tuned too. i know it's not a MS4, but it's got the same exhaust lobe/intake is a little bigger. Love it so for what I've seen of it.
#14
well im still on stock heads so im afraid thats going to hurt me. i have 3.23 gears now but had the stall built for 3.73 and will be doing those very soon. well like my sig says i hit a 12.6 w/ just bolt-on's but that was with a .50 reaction and a drag car went right before me so there was rubber on the track that i hooked up on. but im thinking that if i hooked up i could get mid-higher 11's. am i on target or off pretty bad?
#15
Not to sound like a dick, but shouldn't you have done a bit more research about this cam before buying it? You've got it now and if you decide to change your mind it's going end up costing you a lot more.
#16
well im still on stock heads so im afraid thats going to hurt me. i have 3.23 gears now but had the stall built for 3.73 and will be doing those very soon. well like my sig says i hit a 12.6 w/ just bolt-on's but that was with a .50 reaction and a drag car went right before me so there was rubber on the track that i hooked up on. but im thinking that if i hooked up i could get mid-higher 11's. am i on target or off pretty bad?
#17
true that man!!! remember bigger isnt better!!! your running a stock tranny, and high RPM's will kill these trannies and with the MS4 youll only make the power at high rpm's..and its not gonna be useful on the street.
#18
well i did my homework on it and talked to the guys at tsp. but what i was talking about, is reading other peoples post about different cams. seems like not a lot of like the ms4 to much because of its range. but with a 4k stall i dont seem why that would be a problem. but on the other hand i have never had a cam this big or a stall period.
#19
also i didnt say this before, this isnt my everyday driver. more of a weekend warrior. but like said above, i have it now and nothing i can really do but install it and see how i like it.
#20
You may want to consider talking to Patrick G and have him spec out one for your exact application. He did one for mine and was dead on as he is with so many others on this forum. You should check out the dyno section and look at the dyno charts for that cam. I'm sure there is a bunch of people with a similar setup to what you have and that will give you a good idea of what you're going to be in for.