any vendors sell heads and FAST that are port matched
09-23-2008, 10:27 AM
#1
TECH Junkie
Thread Starter
iTrader: (5)
Join Date: Feb 2007
Location: Key West, Florida
Posts: 3,183
Likes: 0
Received 0 Likes
on
0 Posts
any vendors sell heads and FAST that are port matched after readig some of the stories about how mismatched various head combos are with the FAST intakes.
i'm wondering if anybody sells them in matched pairs. that way it takes into account runner differences and any affects milling may have.
anyone
i'm wondering if anybody sells them in matched pairs. that way it takes into account runner differences and any affects milling may have.
anyone
09-23-2008, 10:40 AM
#2
CARTEK Racing
iTrader: (13)
Join Date: Nov 2001
Location: East Brunswick, NJ
Posts: 2,182
Likes: 0
Received 0 Likes
on
0 Posts
My FAST 90 was port matched to my CARTEK 4X LS6 heads when they were installed.
They port match all their FASTs and even LS6 intakes to the heads they sell...
They port match all their FASTs and even LS6 intakes to the heads they sell...
09-23-2008, 11:47 AM
#4
We have JeremyF porting intakes for us with good results. I'll try to get you a engine dyno sheet shortly.
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
09-23-2008, 12:15 PM
#5
TECH Junkie
Thread Starter
iTrader: (5)
Join Date: Feb 2007
Location: Key West, Florida
Posts: 3,183
Likes: 0
Received 0 Likes
on
0 Posts
jason....are these readily available through your shop?
so if i order a set of heads and a FAST at the same time...are they matched?
and i mean MATCHED matched....not just a generic match to 80% of head designs.
so if i order a set of heads and a FAST at the same time...are they matched?
and i mean MATCHED matched....not just a generic match to 80% of head designs.
