1bigcam

iTrader: (9)

will it work, if not what do i need to make it work ?

NemeSS

iTrader: (127)

easier to use aftermarket or ls2 rail

Clevite Kid

You just need the LS2 fuel rail with some spacers under the four hold-down points. There are usually some for sale . . . . .

1bigcam

iTrader: (9)

ok so the ls1 rails will not work at all ?? reason iam asking because i have a bare ls2 intake and did not want to buy new rails

NemeSS

iTrader: (127)

what tb u going with?

Modern_Muscle

iTrader: (11)

I believe the bolt spacing is different on the LS2 than the LS1.

1bigcam

iTrader: (9)

iam going with a holley 90mm

rao

iTrader: (18)

The bolt spacing is different.

1bigcam

iTrader: (9)

all right thanks for the help guys

CamaroRick

iTrader: (24)

I have an adapter kit from katech for putting ls1 injectors in an ls2 rail, it has 4 spacers and longer bolts ill sell it for 15 shipped. is in pn. KAT-A4674 its the same spacers as KAT-A4096, but the oversized orings included are for an ls7 manifold. you can just reuse the regular sized orings and your good to go