Are there ANY L92 427's out there?
#1
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: Oklahoma City
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have seen LS7 427's, and 1 LSX 427 build, but I have yet to see an L92 build. If you have done an L92 build how did it go/perform.
#2
On The Tree
iTrader: (17)
Join Date: Feb 2008
Location: the b inside the d!
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My buddy is putting a ls7 crank and rods in a ls3 6.2l block and making a 414ci or something like that and keeping it a wet system with ported l92 heads. He is going to buy a ETP carb intake with a 950 prosystems carb.
When we took all his parts to Billy Briggs from W2W we got to check out his new shop and man was it nice and clean and huge. He bought most or all of the machines from W2W. He also has a engine dyno up and running.
He mentioned that Carry from ETP is moving in with him.
When we took all his parts to Billy Briggs from W2W we got to check out his new shop and man was it nice and clean and huge. He bought most or all of the machines from W2W. He also has a engine dyno up and running.
He mentioned that Carry from ETP is moving in with him.
#3
10 Second Club
iTrader: (11)
Join Date: Sep 2003
Location: Murrieta Ca.
Posts: 1,676
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My buddy is putting a ls7 crank and rods in a ls3 6.2l block and making a 414ci or something like that and keeping it a wet system with ported l92 heads. He is going to buy a ETP carb intake with a 950 prosystems carb.
When we took all his parts to Billy Briggs from W2W we got to check out his new shop and man was it nice and clean and huge. He bought most or all of the machines from W2W. He also has a engine dyno up and running.
He mentioned that Carry from ETP is moving in with him.
When we took all his parts to Billy Briggs from W2W we got to check out his new shop and man was it nice and clean and huge. He bought most or all of the machines from W2W. He also has a engine dyno up and running.
He mentioned that Carry from ETP is moving in with him.
I have one. 490 rwhp unlocked ss3600 convertor. baby cam.
#5
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: Oklahoma City
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
LOL. I hope so. You are starting one for me now ![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
I have lost a lot of hope concerning my previous builders desire to make things right (desintegrated, built 347). He has stopped responding to anything I send him now.
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
I have lost a lot of hope concerning my previous builders desire to make things right (desintegrated, built 347). He has stopped responding to anything I send him now.
#6
Teching In
Join Date: Aug 2007
Location: Monterrey, Mexico
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I got a 427 C.I.´ L92 from Scoggin Dickey last year in Sept with 603HP Crank and 484 RWHP with a Bad Tune, The engine is Working Perfect. Good Luck with your Project!
Last edited by genmex; 12-07-2008 at 03:14 PM.
Trending Topics
#11
LS1Tech Premium Sponsor
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
We typically stock the l92/ls3 427s for customers looking for a extra stroke setup. They seem to be pretty nice little short-blocks for the money! We're building one to combine with the new PRC 237cc head!! Should make over 650flywheel horsepower....
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
#15
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Nov 2002
Location: Oklahoma City
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hey Chris don't give away all of my secrets. ![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
I am glad to hear there are others out there. There still aren't very many though. The decisions for it have pretty much been made, but that leaves me with the biggest problem right now....tuning. I am stuck in Germany so I am learning as much as I can. Its just me and EFILive.
With the few numbers I have seen in this post, I sure hope I can exceed 480 to the wheels. genmex and 2c5s, How do you feel about the numbers your engine has made?
My previous itty bitty 347 put down 470 n/a. Unfortunately, it lasted only 2000 miles when it busted a rod bolt and disintegrated back in July. The builder isn't communicating very well with me. So, I had to dump even more money into another build. This one has to be the last. So, I want it done right.
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
I am glad to hear there are others out there. There still aren't very many though. The decisions for it have pretty much been made, but that leaves me with the biggest problem right now....tuning. I am stuck in Germany so I am learning as much as I can. Its just me and EFILive.
With the few numbers I have seen in this post, I sure hope I can exceed 480 to the wheels. genmex and 2c5s, How do you feel about the numbers your engine has made?
My previous itty bitty 347 put down 470 n/a. Unfortunately, it lasted only 2000 miles when it busted a rod bolt and disintegrated back in July. The builder isn't communicating very well with me. So, I had to dump even more money into another build. This one has to be the last. So, I want it done right.