Coolant blockoff rear of Heads
#1
Staging Lane
Thread Starter
Join Date: May 2008
Location: Glen St Mary,Fla.
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I just need a clear answer on the steamholes on the rear of a my heads,New Camaro Stroker build,The stock L92 heads were blocked off at the back from the factory,Now X headed, turbo, hi hp setup,Do I need to tie these into the front crossover tube or just block'em off like the factory heads were? Thanks in advance...Trying to get this thing done
![Driving](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_driving3.gif)
#5
Staging Lane
Thread Starter
Join Date: May 2008
Location: Glen St Mary,Fla.
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks fellows,I'll be making this mod,motors already in the car,guess I'll get another crossover tube from Chevrolet and tie'em together back to front..
#7
Trending Topics
#8
#12
TECH Addict
iTrader: (41)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
http://www.kurturbanperformance.com/...or-system.html
It allow you to use an lines to connect to the dist block and then to the radiator.
It allow you to use an lines to connect to the dist block and then to the radiator.
#13
#15
TECH Junkie
iTrader: (9)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I spent a lot of time researching this a while back and received some good info here so I hope it helps you out
https://ls1tech.com/forums/forced-induction/630983-will-ls6-coolant-tube-conversion-hurt-cooling-system-performance-2.html
https://ls1tech.com/forums/forced-induction/630983-will-ls6-coolant-tube-conversion-hurt-cooling-system-performance-2.html
#17
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Wll the Kurt system will not work with my SC intake so what I am thinking about doing is putting another crossover line like this one on the back my question is: can I just run a line from the front to the back and then "T" these into my coolant system such as into the lower radiator hose or heater hose? or is using the above Wegner fittings a better option?
![](http://i734.photobucket.com/albums/ww343/edgarramon/P8050118.jpg)
Last edited by edge04; 08-27-2010 at 11:29 AM.
#20
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Wll the Kurt system will not work with my SC intake so what I am thinking about doing is putting another crossover line like this one on the back my question is: can I just run a line from the front to the back and then "T" these into my coolant system such as into the lower radiator hose or heater hose? or is using the above Wegner fittings a better option?
![](http://i734.photobucket.com/albums/ww343/edgarramon/P8050118.jpg)
![](http://i734.photobucket.com/albums/ww343/edgarramon/P8050118.jpg)