AIRWOLF LS7 heads
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
New AirWolf Ls7
REV 8mm hollow stem Stainless Valves, 2.20 intake and 1.60 exhaust, Hyd Roller 1.29 dia spring 165 lbs on the seat 425 lbs open, Titanium Retainers, Machined Locks, Locators, Viton Seals. 64 cc – 72cc chambers. Heads are available for 4.060 and 4.125 bore
![](http://www.j-performance.com/images/stories/AIRWOLFCNCheads/air%20wolf%20ls7%20flow%20chart.jpg)
![](https://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/183289_200834206609110_153285404697324_775169_164609_n.jpg)
![](https://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash1/180846_200834173275780_153285404697324_775167_3596574_n.jpg)
![](http://www.j-performance.com/images/stories/AIRWOLFCNCheads/airwolf%20ls7%20cnc%20chamber2.jpg)
![](http://www.j-performance.com/images/stories/AIRWOLFCNCheads/airwolf%20ls7%20cnc%20chamber3.jpg)
![](http://www.j-performance.com/images/stories/AIRWOLFCNCheads/airwolf%20ls7%20cnc%20chamber4.jpg)
![](http://www.j-performance.com/images/stories/AIRWOLFCNCheads/airwolf%20ls7%20cncexhaust%20port1.jpg)
![](http://www.j-performance.com/images/stories/AIRWOLFCNCheads/airwolf%20ls7%20cnc%20exhaust2.jpg)
![](http://www.j-performance.com/images/stories/AIRWOLFCNCheads/airwolf%20ls7%20cnc%20exhaust3.jpg)
![](http://www.j-performance.com/images/stories/AIRWOLFCNCheads/airwolf%20ls7%20cnc%20intake%20port.jpg)
REV 8mm hollow stem Stainless Valves, 2.20 intake and 1.60 exhaust, Hyd Roller 1.29 dia spring 165 lbs on the seat 425 lbs open, Titanium Retainers, Machined Locks, Locators, Viton Seals. 64 cc – 72cc chambers. Heads are available for 4.060 and 4.125 bore
![](http://www.j-performance.com/images/stories/AIRWOLFCNCheads/air%20wolf%20ls7%20flow%20chart.jpg)
![](https://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/183289_200834206609110_153285404697324_775169_164609_n.jpg)
![](https://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash1/180846_200834173275780_153285404697324_775167_3596574_n.jpg)
![](http://www.j-performance.com/images/stories/AIRWOLFCNCheads/airwolf%20ls7%20cnc%20chamber2.jpg)
![](http://www.j-performance.com/images/stories/AIRWOLFCNCheads/airwolf%20ls7%20cnc%20chamber3.jpg)
![](http://www.j-performance.com/images/stories/AIRWOLFCNCheads/airwolf%20ls7%20cnc%20chamber4.jpg)
![](http://www.j-performance.com/images/stories/AIRWOLFCNCheads/airwolf%20ls7%20cncexhaust%20port1.jpg)
![](http://www.j-performance.com/images/stories/AIRWOLFCNCheads/airwolf%20ls7%20cnc%20exhaust2.jpg)
![](http://www.j-performance.com/images/stories/AIRWOLFCNCheads/airwolf%20ls7%20cnc%20exhaust3.jpg)
![](http://www.j-performance.com/images/stories/AIRWOLFCNCheads/airwolf%20ls7%20cnc%20intake%20port.jpg)
![](http://www.j-performance.com/images/stories/AIRWOLFCNCheads/airwolf%20ls7%20cnc%20short%20turn.jpg)
Last edited by Bryce Mulvey; 02-22-2011 at 10:36 PM.
#4
LS1 Tech Administrator
iTrader: (14)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Those are some really coarse CNC tracks, especially the chamber. Impressive that they flow so well in spite of this. Nice to see they don't back up above .700". Are these GM castings that have been CNC'd or all new castings?
__________________
![](https://ls1tech.com/forums/signaturepics/sigpic210_1.gif)
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
![](https://ls1tech.com/forums/signaturepics/sigpic210_1.gif)
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
#6
TECH Regular
iTrader: (35)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Awesome numbers. I have been intrigued by these. The Airwolf LS3s performed well in the Hotrod cylinder head shootout. I like the fact that these come standard with the hollow valves and beefy springs with ti retainers.
Last edited by ramairroughneck; 02-22-2011 at 11:47 PM.
#7
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Patrick the cnc tracks are as no a coarse as they appear. they are the same depth and step over as a AFR competition port.
Trending Topics
#8
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Bryce
The heads look good but AFR's have much finer CNC profiling in the chamber....and there is alot of tricks to be had with the proper toolpath creation as well as certain software programs....some are better than others.
This is not a hand finished piece....
This happens to be one of our 23' Chevy heads but an LS chamber looks no different.
The heads look good but AFR's have much finer CNC profiling in the chamber....and there is alot of tricks to be had with the proper toolpath creation as well as certain software programs....some are better than others.
This is not a hand finished piece....
This happens to be one of our 23' Chevy heads but an LS chamber looks no different.
![](http://i307.photobucket.com/albums/nn283/Flowizard/AFRChamber1.jpg)
Last edited by Tony Mamo @ AFR; 02-23-2011 at 02:52 AM.
#13
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Your can hate on the casting all you want...but the castings are just as nice as any USA foundry would produce and they come with a lifetime warranty. We try to use the best qualtiy parts like REV 8mm hollow stem Stainless Valves, 2.20 intake and 1.60 exhaust, Hyd Roller dual 1.29 dia spring 165 lbs on the seat 425 lbs open, Titanium Retainers, Machined Locks, Locators, and Viton Seals.
Last edited by Bryce Mulvey; 02-24-2011 at 04:18 PM. Reason: Non sponsor pricing info removed
#14
#16
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
These heads have alot of amercain engineering in them. all of the port devlopment on this casting was done by amercains. they are CNC ported finish machined and asssebled all by American's.
All of you banter is just hypocritical....for some reason buying a offshore performace cylinder head casting is a horible thing to do as an american....but you can type about it on your chinese computer.........I'm just saying
All of you banter is just hypocritical....for some reason buying a offshore performace cylinder head casting is a horible thing to do as an american....but you can type about it on your chinese computer.........I'm just saying
#18
TECH Junkie
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
LOL... I just got this email a few minutes ago. Looks like we can all make our own heads now.
-----Original Message-----
From: dingxianyi [mailto:dingxianyi@163.com]
Sent: Thursday, February 24, 2011 8:25 PM
To: (My business address removed)
Subject: supply of metal components
Dear Sir:
We are a leading supplier and manufacturer of metal stamped and casted components based in China.
We offer your high quality Ferrous & Non Ferrous Castings & Stamping Components at a very competitive pricing. We have also strong capabilities in secondary operations such as Machining, polishing, and Plating etc. Our products are well received in various international markets specially in US & EU.
We hope you can try us by sending drawings, material specifications, quantity, preferably your sample, so that we could make an offer and reproduced samples for your approval.
Looking forward to receiving your inquiry
Best Regards
Edward Ding/ Sales Manager
Hubei Junhuistamping Manufacturing Co.Ltd.
621#,Yun Gang Da Xia, ChuMen Town,YuHuan County, 317605,ZheJiang,China Tel : +86 713 8671680 8662580 Fax : +86 713 8671680 8662580 http://www.Junhuistamping.com Email:xiaoding@junhuistamping.com
dingxianyi@163.com
-----Original Message-----
From: dingxianyi [mailto:dingxianyi@163.com]
Sent: Thursday, February 24, 2011 8:25 PM
To: (My business address removed)
Subject: supply of metal components
Dear Sir:
We are a leading supplier and manufacturer of metal stamped and casted components based in China.
We offer your high quality Ferrous & Non Ferrous Castings & Stamping Components at a very competitive pricing. We have also strong capabilities in secondary operations such as Machining, polishing, and Plating etc. Our products are well received in various international markets specially in US & EU.
We hope you can try us by sending drawings, material specifications, quantity, preferably your sample, so that we could make an offer and reproduced samples for your approval.
Looking forward to receiving your inquiry
Best Regards
Edward Ding/ Sales Manager
Hubei Junhuistamping Manufacturing Co.Ltd.
621#,Yun Gang Da Xia, ChuMen Town,YuHuan County, 317605,ZheJiang,China Tel : +86 713 8671680 8662580 Fax : +86 713 8671680 8662580 http://www.Junhuistamping.com Email:xiaoding@junhuistamping.com
dingxianyi@163.com
#19
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
These heads have alot of amercain engineering in them. all of the port devlopment on this casting was done by amercains. they are CNC ported finish machined and asssebled all by American's.
All of you banter is just hypocritical....for some reason buying a offshore performace cylinder head casting is a horible thing to do as an american....but you can type about it on your chinese computer.........I'm just saying
All of you banter is just hypocritical....for some reason buying a offshore performace cylinder head casting is a horible thing to do as an american....but you can type about it on your chinese computer.........I'm just saying
Apparently you never got to see the first offerings by ProComp, the Gen 1 SBC and BBC stuff. They kinda resembled cylinder heads in that they had ports and chambers, but design was a nightmare. Porous as Swiss cheese, the big block heads weighed 7 - 8 lbs less than comparable US made offerings. They're lighter because it takes less aluminum (cost savings) and shipping is less (cost savings). What makes you think the aluminum is anywhere near the quality and purity of domestic castings? I've known more than one racer who bought ProComp castings and ended up spending more to get everything in spec than they would have if they'd bought the good stuff from the start and still didn't have a head that would make as much power.
Harbor Freight import Chinese crap. You can US design and machine it all you want, but you still have a Chinese ProComp casting core.