Help a 16yrs old guy with his 427 build setup!
10-08-2011, 08:05 PM
#1
On The Tree
Thread Starter
Join Date: Oct 2009
Location: right next to the neighbours
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Help a 16yrs old guy with his 427 build setup! Hi Fellas!
As I said , I'm only a 16 yrs old so there's must be a problem with a badass setup.
But first, Speacial thanks to Brayan@speedinc for his help by shipping my things all over the world to the Middle East "Kuwait" <- Where I come from
My car is an 2000 ws6 Trans am...
MY BRAND new Engine specs
- LS1 Darton sleeved block bored to 4.125
- Callies LS7 crankshaft+Compstar rods+-2cc Diomand Pistons= 427 stroker kit
-TEA/TFS 235 heads+ Yella terra non.adj rockers, 114 25x.26x BULLIT cam.
-Fast 102 intake+NW throttle body+fuel lines and 42lb injectors
-FTP 100mm cold air intake + TSP 100mm MAF
-Denali coils + MSD wires
-SLP oil pump+timing chain package
-TFS 7500 pushrods + morel lifters
-SLP Crank pully
-NX Nitrous planing for a 400 shot
& I simply dunno if I forgot anything more :p
This car is gonna be an 100% street car and a Daily use
Questions is:
- I had an brand new kooks 1 7/8 headers until I forgot it's my friends Birthday so I gave them to him as a preasent -.- , So TSP 1 7/8's or the Kooks 1 7/8 ?? ther's almost 400$ difference so is it worth to buy the Kooks headers ?
- What is the best electric water pump for this engine? "with GPM numbers"
- Just threwed my T56 away, Best Transmmision built T56?? with a good price and can handle a 427 power? "Already have an Mcleod Twin disk Clutch
- An good shifter??
- What rear end modification do I have to do for my stock 9 bolt??
Extra Question : I'm working on my other car " A4 1999 H/C Camaro ss, with a lingenfilter gt11 cam , What will be the perfect tourqe converter stall??
Thank you! Waiting for you'r feedback!
Hamad
As I said , I'm only a 16 yrs old so there's must be a problem with a badass setup.
But first, Speacial thanks to Brayan@speedinc for his help by shipping my things all over the world to the Middle East "Kuwait" <- Where I come from
My car is an 2000 ws6 Trans am...
MY BRAND new Engine specs
- LS1 Darton sleeved block bored to 4.125
- Callies LS7 crankshaft+Compstar rods+-2cc Diomand Pistons= 427 stroker kit
-TEA/TFS 235 heads+ Yella terra non.adj rockers, 114 25x.26x BULLIT cam.
-Fast 102 intake+NW throttle body+fuel lines and 42lb injectors
-FTP 100mm cold air intake + TSP 100mm MAF
-Denali coils + MSD wires
-SLP oil pump+timing chain package
-TFS 7500 pushrods + morel lifters
-SLP Crank pully
-NX Nitrous planing for a 400 shot
& I simply dunno if I forgot anything more :p
This car is gonna be an 100% street car and a Daily use
Questions is:
- I had an brand new kooks 1 7/8 headers until I forgot it's my friends Birthday so I gave them to him as a preasent -.- , So TSP 1 7/8's or the Kooks 1 7/8 ?? ther's almost 400$ difference so is it worth to buy the Kooks headers ?
- What is the best electric water pump for this engine? "with GPM numbers"
- Just threwed my T56 away, Best Transmmision built T56?? with a good price and can handle a 427 power? "Already have an Mcleod Twin disk Clutch
- An good shifter??
- What rear end modification do I have to do for my stock 9 bolt??
Extra Question : I'm working on my other car " A4 1999 H/C Camaro ss, with a lingenfilter gt11 cam , What will be the perfect tourqe converter stall??
Thank you! Waiting for you'r feedback!
Hamad
10-08-2011, 10:40 PM
#6
stock rear isnt a 9 bolt its a 10. you either can do a Ford 9" or moser/strange 12 bolt
for the money, TSP headers are plenty good, they all do the same ****
T-56, plenty of sponsors to the right that build them and will be the ones to dictate what you will need.
electric waterpump - why? They may free up a couple of HP but unless you aare gonna be drag racing a lot and in staging lanes
for the money, TSP headers are plenty good, they all do the same ****
T-56, plenty of sponsors to the right that build them and will be the ones to dictate what you will need.
electric waterpump - why? They may free up a couple of HP but unless you aare gonna be drag racing a lot and in staging lanes
Trending Topics
10-08-2011, 11:06 PM
#8
On The Tree
Thread Starter
Join Date: Oct 2009
Location: right next to the neighbours
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Guitar, by saying i threw away my t56 is only uninstall the trans is what I mean, and my friend deserves more than a set of headers
10-09-2011, 02:45 AM
#12
On The Tree
Thread Starter
Join Date: Oct 2009
Location: right next to the neighbours
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
10-09-2011, 04:31 AM
#13
TECH Fanatic
You say you gave headers away & ask about TSP headers, now on the same day you get all in that pic from Speed inc, headers as well.
Me thinks you are a 16-yr old Troll also, and not from where you say you are.
Best you put up some pics of your car & area etc.
10-09-2011, 04:20 PM
#17
On The Tree
Thread Starter
Join Date: Oct 2009
Location: right next to the neighbours
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Kind've sounding less Arabic in your thread now, mmmmm
You say you gave headers away & ask about TSP headers, now on the same day you get all in that pic from Speed inc, headers as well.
Me thinks you are a 16-yr old Troll also, and not from where you say you are.
Best you put up some pics of your car & area etc.
You say you gave headers away & ask about TSP headers, now on the same day you get all in that pic from Speed inc, headers as well.
Me thinks you are a 16-yr old Troll also, and not from where you say you are.
Best you put up some pics of your car & area etc.
just add me at Facebook , camaro coz is my name @ FB.
you'll see everything there
10-09-2011, 04:27 PM
#18
TECH Regular
iTrader: (1)
Join Date: Jun 2007
Location: Saudi Arabia, Qatif
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
Mohammed Alzalzelah aka pontiac slp and his team is building your motor right ? cause I remembered that he informed me about building a 427 for a young guy .. good luck and be safe ... 427ci F-Body can make some damage
10-09-2011, 04:31 PM
#19
On The Tree
Thread Starter
Join Date: Oct 2009
Location: right next to the neighbours
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Thank's all for you'r feedback , really appreciate it
I compered the 2" headers with the 1 7/8's on my sold 408ci , the 1 7/8's was a much better choice for a street car.
So I'm going for the 1 7/8's but I'm not sure what brand do I need to go for....
I compered the 2" headers with the 1 7/8's on my sold 408ci , the 1 7/8's was a much better choice for a street car.
So I'm going for the 1 7/8's but I'm not sure what brand do I need to go for....
10-09-2011, 04:39 PM
#20
On The Tree
Thread Starter
Join Date: Oct 2009
Location: right next to the neighbours
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
I'm one of the team members right now..
Thank you for the such nice words...
& Hell yeah! I'm so close in finishing my project,, can you PM me please ? about the Tick trans you've got and how much did it costs you?