JR at Frankenstein is a gem
The following users liked this post:
sxc Z28 (06-22-2020)
#24
ModSquad
iTrader: (6)
#25
On The Tree
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I made an attempt to use them but customer service really sucked. I asked for data on some lt4 heads and they claim to have none. Basically told me to go elsewhere if didn’t like what I was hearing. So now I have lme heads on my zl1 instead of their product. Car is currently faster then one other cars using fed lt4 heads in the summer then this very popular YouTube poster was in the winter and using ice. So couldn’t be happier using late model engines to do my heads as they answered every single question I had. They also did extra custom work like cut the heads to my specifics didn’t charge me any thing more or try to up sell springs I didn’t need. I don’t like the idea of a company not wanting to share flow data when I’m trying to grind a cam to my specific combo. So if someone cannot give you specific flow data when your choosing your cam your going to be giving up hp. I would think a company building engines in house would understand how important that is when choosing a cam. But I guess not.
We are not for everybody and again happy to hear your are taken care of. No you are not faster than our LT4 headed cars but you are close and very impressive no doubt about that. Sorry I can't build your car over the phone buddy.
The following users liked this post:
LilJayV10 (07-03-2020)
#26
On The Tree
#28
On The Tree
#30
On The Tree
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#31
10 Second Club
Thread Starter
#37
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,838 Likes
on
1,146 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
#38
On The Tree
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The CID is going to do amazing on that setup. Personally I'd machine or shave down the bars on the base for EFI stuff.
The following users liked this post:
Launch (06-23-2020)
#39
11 Second Club
iTrader: (3)
The following users liked this post:
AINT SKEERED (06-23-2020)