Warhawk Answers
Thread Starter
Collections Removal
Joined: Jan 2006
Posts: 263
Likes: 0
From: Long Island, NY
Warhawk Answers Gentlemen,
I've created this new thread to speak to the participants of the " Warhawk Block?" and "Warhawk LS 7X" threads.
Due to a contractual commitment, the "job run" prior to the Warhawk project has experienced a delay due to design and tooling issues beyond the control of World Products. This project is a "Brand X" venture for which World was contracted to re-develop Brand X's design for severe usage. Please, no boo-ing, but World must occaisionally work outside the realm of Chevrolet architecture. In no way does this prior commitment or its issues relate to the Warhawk other than causing Warhawk's delay.
World's contracted customer for Brand X has changed several design parameters which in turn caused tooling changes. The final machining on that project is reaching completion as I write. Machining on several Warhawk prototypes has taken place on a "one-off" basis. (Not yet a production run.) Inspection and approval for production is near. Sleeves, main caps, fasteners, valves, seals, springs and retainers are all in place,
"WorldTech" and "Warhawk1", are the creators of this complex project. They monitor the sentiment here as I do. We are tremendously appreciative of all of your support and enthusiam as well as those of you that are voting for this line of products with your dollars. We have no desire to deceive the very core of our customer base.
TWO THINGS WE WOULD NEVER DO IS OFFEND OUR LOYAL FRIENDS OR ENCOURAGE OUR SKEPTICS.
Both men have worked seven-day weeks since the PRI show, not only to birth Warhawk but also to hasten the Brand X project to conclusion, a necessary evil. Remember that Warhawk 1 also designed the casting tooling simultaneously with the blocks and heads - an enormous project.
WorldTech has instructed myself and our sales dept. (for those of you who have called) that eight weeks from now, at the end of May, blocks and heads will ship. We will post all updates and information as events unfold.
To clear up a possible misconception; there are no "back door" deals - no "favored customer" shipments ahead of anyone. Shipments will be filled in the order they've been received.
World promises that the final products will be everything you guys wished for. It just won't go out 'till it's right.
To our supporters we say; sorry to delay your projects and your customers projects but it WILL be worth the wait. To our detractors we say;your sentiments are NEVER ignored but our work will not fail to impress you, if you give us a chance to prove it.
On behalf of World Products, I thank you all for the chance to address these concerns.
Regards,
I've created this new thread to speak to the participants of the " Warhawk Block?" and "Warhawk LS 7X" threads.
Due to a contractual commitment, the "job run" prior to the Warhawk project has experienced a delay due to design and tooling issues beyond the control of World Products. This project is a "Brand X" venture for which World was contracted to re-develop Brand X's design for severe usage. Please, no boo-ing, but World must occaisionally work outside the realm of Chevrolet architecture. In no way does this prior commitment or its issues relate to the Warhawk other than causing Warhawk's delay.
World's contracted customer for Brand X has changed several design parameters which in turn caused tooling changes. The final machining on that project is reaching completion as I write. Machining on several Warhawk prototypes has taken place on a "one-off" basis. (Not yet a production run.) Inspection and approval for production is near. Sleeves, main caps, fasteners, valves, seals, springs and retainers are all in place,
"WorldTech" and "Warhawk1", are the creators of this complex project. They monitor the sentiment here as I do. We are tremendously appreciative of all of your support and enthusiam as well as those of you that are voting for this line of products with your dollars. We have no desire to deceive the very core of our customer base.
TWO THINGS WE WOULD NEVER DO IS OFFEND OUR LOYAL FRIENDS OR ENCOURAGE OUR SKEPTICS.
Both men have worked seven-day weeks since the PRI show, not only to birth Warhawk but also to hasten the Brand X project to conclusion, a necessary evil. Remember that Warhawk 1 also designed the casting tooling simultaneously with the blocks and heads - an enormous project.
WorldTech has instructed myself and our sales dept. (for those of you who have called) that eight weeks from now, at the end of May, blocks and heads will ship. We will post all updates and information as events unfold.
To clear up a possible misconception; there are no "back door" deals - no "favored customer" shipments ahead of anyone. Shipments will be filled in the order they've been received.
World promises that the final products will be everything you guys wished for. It just won't go out 'till it's right.
To our supporters we say; sorry to delay your projects and your customers projects but it WILL be worth the wait. To our detractors we say;your sentiments are NEVER ignored but our work will not fail to impress you, if you give us a chance to prove it.
On behalf of World Products, I thank you all for the chance to address these concerns.
Regards,
On The Tree
Joined: Aug 2005
Posts: 132
Likes: 0
Originally Posted by MerlinPro
Gentlemen,
I've created this new thread to speak to the participants of the " Warhawk Block?" and "Warhawk LS 7X" threads.
Due to a contractual commitment, the "job run" prior to the Warhawk project has experienced a delay due to design and tooling issues beyond the control of World Products. This project is a "Brand X" venture for which World was contracted to re-develop Brand X's design for severe usage. Please, no boo-ing, but World must occaisionally work outside the realm of Chevrolet architecture. In no way does this prior commitment or its issues relate to the Warhawk other than causing Warhawk's delay.
World's contracted customer for Brand X has changed several design parameters which in turn caused tooling changes. The final machining on that project is reaching completion as I write. Machining on several Warhawk prototypes has taken place on a "one-off" basis. (Not yet a production run.) Inspection and approval for production is near. Sleeves, main caps, fasteners, valves, seals, springs and retainers are all in place,
"WorldTech" and "Warhawk1", are the creators of this complex project. They monitor the sentiment here as I do. We are tremendously appreciative of all of your support and enthusiam as well as those of you that are voting for this line of products with your dollars. We have no desire to deceive the very core of our customer base.
TWO THINGS WE WOULD NEVER DO IS OFFEND OUR LOYAL FRIENDS OR ENCOURAGE OUR SKEPTICS.
Both men have worked seven-day weeks since the PRI show, not only to birth Warhawk but also to hasten the Brand X project to conclusion, a necessary evil. Remember that Warhawk 1 also designed the casting tooling simultaneously with the blocks and heads - an enormous project.
WorldTech has instructed myself and our sales dept. (for those of you who have called) that eight weeks from now, at the end of May, blocks and heads will ship. We will post all updates and information as events unfold.
To clear up a possible misconception; there are no "back door" deals - no "favored customer" shipments ahead of anyone. Shipments will be filled in the order they've been received.
World promises that the final products will be everything you guys wished for. It just won't go out 'till it's right.
To our supporters we say; sorry to delay your projects and your customers projects but it WILL be worth the wait. To our detractors we say;your sentiments are NEVER ignored but our work will not fail to impress you, if you give us a chance to prove it.
On behalf of World Products, I thank you all for the chance to address these concerns.
Regards,
I've created this new thread to speak to the participants of the " Warhawk Block?" and "Warhawk LS 7X" threads.
Due to a contractual commitment, the "job run" prior to the Warhawk project has experienced a delay due to design and tooling issues beyond the control of World Products. This project is a "Brand X" venture for which World was contracted to re-develop Brand X's design for severe usage. Please, no boo-ing, but World must occaisionally work outside the realm of Chevrolet architecture. In no way does this prior commitment or its issues relate to the Warhawk other than causing Warhawk's delay.
World's contracted customer for Brand X has changed several design parameters which in turn caused tooling changes. The final machining on that project is reaching completion as I write. Machining on several Warhawk prototypes has taken place on a "one-off" basis. (Not yet a production run.) Inspection and approval for production is near. Sleeves, main caps, fasteners, valves, seals, springs and retainers are all in place,
"WorldTech" and "Warhawk1", are the creators of this complex project. They monitor the sentiment here as I do. We are tremendously appreciative of all of your support and enthusiam as well as those of you that are voting for this line of products with your dollars. We have no desire to deceive the very core of our customer base.
TWO THINGS WE WOULD NEVER DO IS OFFEND OUR LOYAL FRIENDS OR ENCOURAGE OUR SKEPTICS.
Both men have worked seven-day weeks since the PRI show, not only to birth Warhawk but also to hasten the Brand X project to conclusion, a necessary evil. Remember that Warhawk 1 also designed the casting tooling simultaneously with the blocks and heads - an enormous project.
WorldTech has instructed myself and our sales dept. (for those of you who have called) that eight weeks from now, at the end of May, blocks and heads will ship. We will post all updates and information as events unfold.
To clear up a possible misconception; there are no "back door" deals - no "favored customer" shipments ahead of anyone. Shipments will be filled in the order they've been received.
World promises that the final products will be everything you guys wished for. It just won't go out 'till it's right.
To our supporters we say; sorry to delay your projects and your customers projects but it WILL be worth the wait. To our detractors we say;your sentiments are NEVER ignored but our work will not fail to impress you, if you give us a chance to prove it.
On behalf of World Products, I thank you all for the chance to address these concerns.
Regards,
Trending Topics
Originally Posted by MerlinPro
Gentlemen,
I've created this new thread to speak to the participants of the " Warhawk Block?" and "Warhawk LS 7X" threads.
Due to a contractual commitment, the "job run" prior to the Warhawk project has experienced a delay due to design and tooling issues beyond the control of World Products. This project is a "Brand X" venture for which World was contracted to re-develop Brand X's design for severe usage. Please, no boo-ing, but World must occaisionally work outside the realm of Chevrolet architecture. In no way does this prior commitment or its issues relate to the Warhawk other than causing Warhawk's delay.
World's contracted customer for Brand X has changed several design parameters which in turn caused tooling changes. The final machining on that project is reaching completion as I write. Machining on several Warhawk prototypes has taken place on a "one-off" basis. (Not yet a production run.) Inspection and approval for production is near. Sleeves, main caps, fasteners, valves, seals, springs and retainers are all in place,
"WorldTech" and "Warhawk1", are the creators of this complex project. They monitor the sentiment here as I do. We are tremendously appreciative of all of your support and enthusiam as well as those of you that are voting for this line of products with your dollars. We have no desire to deceive the very core of our customer base.
TWO THINGS WE WOULD NEVER DO IS OFFEND OUR LOYAL FRIENDS OR ENCOURAGE OUR SKEPTICS.
Both men have worked seven-day weeks since the PRI show, not only to birth Warhawk but also to hasten the Brand X project to conclusion, a necessary evil. Remember that Warhawk 1 also designed the casting tooling simultaneously with the blocks and heads - an enormous project.
WorldTech has instructed myself and our sales dept. (for those of you who have called) that eight weeks from now, at the end of May, blocks and heads will ship. We will post all updates and information as events unfold.
To clear up a possible misconception; there are no "back door" deals - no "favored customer" shipments ahead of anyone. Shipments will be filled in the order they've been received.
World promises that the final products will be everything you guys wished for. It just won't go out 'till it's right.
To our supporters we say; sorry to delay your projects and your customers projects but it WILL be worth the wait. To our detractors we say;your sentiments are NEVER ignored but our work will not fail to impress you, if you give us a chance to prove it.
On behalf of World Products, I thank you all for the chance to address these concerns.
Regards,
I've created this new thread to speak to the participants of the " Warhawk Block?" and "Warhawk LS 7X" threads.
Due to a contractual commitment, the "job run" prior to the Warhawk project has experienced a delay due to design and tooling issues beyond the control of World Products. This project is a "Brand X" venture for which World was contracted to re-develop Brand X's design for severe usage. Please, no boo-ing, but World must occaisionally work outside the realm of Chevrolet architecture. In no way does this prior commitment or its issues relate to the Warhawk other than causing Warhawk's delay.
World's contracted customer for Brand X has changed several design parameters which in turn caused tooling changes. The final machining on that project is reaching completion as I write. Machining on several Warhawk prototypes has taken place on a "one-off" basis. (Not yet a production run.) Inspection and approval for production is near. Sleeves, main caps, fasteners, valves, seals, springs and retainers are all in place,
"WorldTech" and "Warhawk1", are the creators of this complex project. They monitor the sentiment here as I do. We are tremendously appreciative of all of your support and enthusiam as well as those of you that are voting for this line of products with your dollars. We have no desire to deceive the very core of our customer base.
TWO THINGS WE WOULD NEVER DO IS OFFEND OUR LOYAL FRIENDS OR ENCOURAGE OUR SKEPTICS.
Both men have worked seven-day weeks since the PRI show, not only to birth Warhawk but also to hasten the Brand X project to conclusion, a necessary evil. Remember that Warhawk 1 also designed the casting tooling simultaneously with the blocks and heads - an enormous project.
WorldTech has instructed myself and our sales dept. (for those of you who have called) that eight weeks from now, at the end of May, blocks and heads will ship. We will post all updates and information as events unfold.
To clear up a possible misconception; there are no "back door" deals - no "favored customer" shipments ahead of anyone. Shipments will be filled in the order they've been received.
World promises that the final products will be everything you guys wished for. It just won't go out 'till it's right.
To our supporters we say; sorry to delay your projects and your customers projects but it WILL be worth the wait. To our detractors we say;your sentiments are NEVER ignored but our work will not fail to impress you, if you give us a chance to prove it.
On behalf of World Products, I thank you all for the chance to address these concerns.
Regards,
but will the warhawk be available in a cast iron version?
i would assume a cast iron version would include all of the benefits and features of the aluminum casting, but i would assume the significant
reduction in price as opposed to an aluminum casting with sleeves
price wise comparatively speaking
thank you
Thread Starter
Collections Removal
Joined: Jan 2006
Posts: 263
Likes: 0
From: Long Island, NY
427 LS1,
I believe the first run is 100 to 125 blocks. I don't know the head quantities yet but demand will dictate after the initial batches.
NemeSS
No iron versions are planned at this time that I know of as that would entail different tooling. Both materials pour differently. Besides, equal strength at nearly half the weight is a major design parameter.
You could paint the block Chevy Orange to sandbag your buddies a little...
Regards,
I believe the first run is 100 to 125 blocks. I don't know the head quantities yet but demand will dictate after the initial batches.
NemeSS
No iron versions are planned at this time that I know of as that would entail different tooling. Both materials pour differently. Besides, equal strength at nearly half the weight is a major design parameter.
You could paint the block Chevy Orange to sandbag your buddies a little...
Regards,
Originally Posted by 1fstTA
can some body tell me how to get one. I have sent 2 different messages to them about this block with money in hand and no one will ever replie.
I'm not sure if World Products sells directly to the public. You can call and order directly from us. We are a WP dealer. We have a few on order and we will begin taking orders as soon as they come in.
Originally Posted by 1fstTA
can some body tell me how to get one. I have sent 2 different messages to them about this block with money in hand and no one will ever replie.
Howdy!
Dang, I keep thinking I need to get of the following custom tags:
454 Z06
BIG BLOK
And of course the appropriate product to go along with it
I've been on a FI kick, but the simplicity of a big displacement motor (especially for my occasional DE type event) is hard to resist. FI is pretty sexy looking, but a WP setup with a set of custom Katech valve covers, some coil relocation, yow!
Keeping a close eye on this development!
Dang, I keep thinking I need to get of the following custom tags:
454 Z06
BIG BLOK
And of course the appropriate product to go along with it
I've been on a FI kick, but the simplicity of a big displacement motor (especially for my occasional DE type event) is hard to resist. FI is pretty sexy looking, but a WP setup with a set of custom Katech valve covers, some coil relocation, yow!Keeping a close eye on this development!
Originally Posted by DTZ06
I've been on a FI kick, but the simplicity of a big displacement motor (especially for my occasional DE type event) is hard to resist. FI is pretty sexy looking, but a WP setup with a set of custom Katech valve covers, some coil relocation, yow!
Merlin- kudos to you at the rest of the folks at WP for taking on this project in the first place.
Super kudos to you for your willingness to give customers a realistic timeline (and the reasons behind that timeline) for product delivery... I'm not in the market for the block right now (I have a C5R block'd 427 sitting in a crate), but I will certainly be in the market for the heads once they hit the street.
BTW- yes, I understand that the Warhawk block may be stronger than the C5R piece, but it's what I have, and it'll hold for what I am looking to do (for now...
)... unless, of course, I can find someone to TRADE me a new Warhawk block for it...
Super kudos to you for your willingness to give customers a realistic timeline (and the reasons behind that timeline) for product delivery... I'm not in the market for the block right now (I have a C5R block'd 427 sitting in a crate), but I will certainly be in the market for the heads once they hit the street.
BTW- yes, I understand that the Warhawk block may be stronger than the C5R piece, but it's what I have, and it'll hold for what I am looking to do (for now...
)... unless, of course, I can find someone to TRADE me a new Warhawk block for it... 
