How much are the truck intakes?

 

is this the intake you guys are looking for
http://cgi.ebay.com/ebaymotors/L92-I...23986347QQrdZ1

 

i'm sure that thing is going to cost some money when it's done

 

Oh no, thats not it. I think that is a 6 cyl intake for a Ford pinto.

 

holy crap that intake on ebay just went for $690!! LG from LGM barely got outbid for it..lol.

 

I bid on it also. I figured I could sell me Fast and be even. Oh well.

 

Does anyone have the part number for the L92 Truck intake?

And what is the stock chamber volume of a L92 head? I've seen 68cc and 70cc.

Thanks

 

I believe the heads I measured were 70cc.

Richard

 

Richard,

Can these be milled enough to get 11:1 or 11:2 on a 402 stroker? If so, how many thou would have to come off?

 

It looks like a flat top piston with valve reliefs will get a 408cid to approx. 11.1:1 with the heads milled .020" to get the chamber size back to stock (70cc).

Richard

 

When will this combo be out for sale to the public!! *stomps feet on ground like an 8yr old*

 

There, there fella. It'll get done in the short future.

Hang in there for just a bit longer.

Richard

 

better be careful, might be going postal soon :twitch, twitch:

 

LOL RIchard, you are going to have people beating down your shop door (they just better not steal my tb)

 

his door? hell ill treck up to michigan, break down gm's door, and say: i pitty the fool who dont give me my intake.

 

Does any know if the L92 heads will fit into a 6 litre LQ4 truck engine. The bore is exactly 4inches. Please advise. Thanks

 

thts exactly wht im doing. l92 heads, car intake, LS7 cam, .030 head gaskets, and LS7 rockers.

 

this is the info i was specifically looking for regarding the l92 heads. also, how much head milling / piston flycutting would be required to achieve 11.5:1 compression on a stock lq4 shortblock and with what thickness gaskets? throw in a good cam, vic jr intake, and you've got yourself a 650hp motor begging to be put into a small car! and don't forget the nitro boose.

 

Ok, in all this info overload and huge posts, I cannot manage to find the GM p/n for a complete L92 head, only a bare head. A little help here....thanks!

 

go to sdpc's(sponsor) website and do a quick search and u can order the heads from them.