TByrne: Roll Cage GP?
#1
Launching!
Thread Starter
Join Date: Dec 2001
Location: Bowling Green, Kentucky
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well looks like we have at least 10 people from what the other thread said. I am ready and they seem to be as well. Can you get us pricing on this? I'm ready now. I am in for a 6 point weld in to the gas tank area not speakers with removable side boor bars jig notched. What's it going to run total out the door to my door? Let's get this going guys. <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" /> <img border="0" alt="[Camaro]" title="" src="graemlins/camaro.gif" />
#2
TECH Enthusiast
iTrader: (3)
Join Date: Nov 2001
Location: Las Vegas, NV
Posts: 687
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
How much for a 6 point bolt in? I want to be able to bolt in and out the sides as well, so it is easy to get in the car when I am not racing. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
#3
TECH Senior Member
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Pricing for 10 or more orders would be -
BOLT-IN
FWOL04
F-Body 6-Point Bolt-in Roll Bar Mild Steel, Powder-coated Black
$499.99
FWOL04B
F-Body 6-Point Bolt-in Roll Bar Mild Steel, Bare
$489.99
FWOL04CM
4130 Cromoly F-Body 6-point Bolt-in Roll Bar, Powder-coated Black
$779.99
FWOL04CM-B
4130 Cromoly F-Body 6-point Bolt-in Roll Bar, Bare
$749.99
F-Body 4-Point Bolt-in Roll Bar Mild Steel, Powder-coated Black
$369.99
F-Body 4-Point Bolt-in Roll Bar Mild Steel, Bare
$359.99
WELD-IN
FWOL03
F-Body 6-Point Weld-In Roll Bar Kit, Mild Steel
$259.99
FWOL03CM
4130 Cromoly F-Body 6-Point Weld-in Roll Bar Kit
$359.99
FWOL03-N
Jig Notching of F-Body 6-Point Roll Bar Kit
$100.00
F-Body 4-Point Weld-in Roll Bar Kit, Mild Steel
$169.99
4130 Cromoly F-Body 4-Point Weld-in Roll Bar Kit
$269.99
10 POINT
wolfe10pointmild
Roll Cage Kit, Mild Steel, 4th Gen F-Body
$349.99
wolfe10pointchro
Roll Cage Kit, 4130 Cromoly, 4th Gen F-Body
$529.99
wolfe10pointmild5
Mild Steel Front Half Kit
$249.99
wolfe10pointchro5
4130 Cromoly Front Half Kit
$309.99
CONVERTIBLE
wolfevert6
Bolt-In 6-point powder coated black
$519.99
wolfevert6bare
Bolt-In 6-point bare (unpainted)
$589.99
wolfevert6chro
Bolt-In 6-point 4130 Cromoly coated black
$769.99
wolfevert6chrobare
Bolt-In 6-point 4130 Cromoly coated black bare (unpainted)
$759.99
wolfevert4
Bolt in 4 point
$379.99
wolfevert4bare
Bolt in 4 point bare (unpainted)
$359.99
wolfeweldvert
Weld in basic kit (mild steel)
$259.99
wolfeweldvert
Weld in basic kit (chromoly bare)
$369.99
Pricing for the options (swing outs, jig notching ect...) will be the same that we have listed on the site. There isn't much $ in the less expensive cages so there won't be a huge difference in price.
Tom
BOLT-IN
FWOL04
F-Body 6-Point Bolt-in Roll Bar Mild Steel, Powder-coated Black
$499.99
FWOL04B
F-Body 6-Point Bolt-in Roll Bar Mild Steel, Bare
$489.99
FWOL04CM
4130 Cromoly F-Body 6-point Bolt-in Roll Bar, Powder-coated Black
$779.99
FWOL04CM-B
4130 Cromoly F-Body 6-point Bolt-in Roll Bar, Bare
$749.99
F-Body 4-Point Bolt-in Roll Bar Mild Steel, Powder-coated Black
$369.99
F-Body 4-Point Bolt-in Roll Bar Mild Steel, Bare
$359.99
WELD-IN
FWOL03
F-Body 6-Point Weld-In Roll Bar Kit, Mild Steel
$259.99
FWOL03CM
4130 Cromoly F-Body 6-Point Weld-in Roll Bar Kit
$359.99
FWOL03-N
Jig Notching of F-Body 6-Point Roll Bar Kit
$100.00
F-Body 4-Point Weld-in Roll Bar Kit, Mild Steel
$169.99
4130 Cromoly F-Body 4-Point Weld-in Roll Bar Kit
$269.99
10 POINT
wolfe10pointmild
Roll Cage Kit, Mild Steel, 4th Gen F-Body
$349.99
wolfe10pointchro
Roll Cage Kit, 4130 Cromoly, 4th Gen F-Body
$529.99
wolfe10pointmild5
Mild Steel Front Half Kit
$249.99
wolfe10pointchro5
4130 Cromoly Front Half Kit
$309.99
CONVERTIBLE
wolfevert6
Bolt-In 6-point powder coated black
$519.99
wolfevert6bare
Bolt-In 6-point bare (unpainted)
$589.99
wolfevert6chro
Bolt-In 6-point 4130 Cromoly coated black
$769.99
wolfevert6chrobare
Bolt-In 6-point 4130 Cromoly coated black bare (unpainted)
$759.99
wolfevert4
Bolt in 4 point
$379.99
wolfevert4bare
Bolt in 4 point bare (unpainted)
$359.99
wolfeweldvert
Weld in basic kit (mild steel)
$259.99
wolfeweldvert
Weld in basic kit (chromoly bare)
$369.99
Pricing for the options (swing outs, jig notching ect...) will be the same that we have listed on the site. There isn't much $ in the less expensive cages so there won't be a huge difference in price.
Tom
#4
Launching!
Thread Starter
Join Date: Dec 2001
Location: Bowling Green, Kentucky
Posts: 241
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well guys Tom has stepped up, let's get this going for them. I'm ready so let's start the ordering process.
#5
TECH Senior Member
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The GP isn't listed on our site yet but you can use these prices when you place your order. That can be done on the site or by calling 1-877-4-TBYRNE.
Thanks,
Tom
www.tbyrnemotorsports.com
Thanks,
Tom
www.tbyrnemotorsports.com
Trending Topics
#9
TECH Junkie
Join Date: Jan 2002
Location: At the office
Posts: 3,015
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Anybody here know if you can still recline your front seats if the removable crossbar on a 5 or 6pt bar is taken out for daily driving?
<small>[ November 21, 2002, 01:35 PM: Message edited by: verbs ]</small>
<small>[ November 21, 2002, 01:35 PM: Message edited by: verbs ]</small>
#11
TECH Senior Member
iTrader: (15)
Join Date: Dec 2001
Location: Mass
Posts: 8,642
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Closing date for this GP will be Monday, December 2nd. I checked this morning and found that we haven't seen any orders come in yet.
Tom
www.tbyrnemotorsports.com
Tom
www.tbyrnemotorsports.com
#12
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Make me # 2 my order went in today. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
I still want to verify but do the rear bars go through my speaker area or in front of them?
<img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
I just looked at the photos on Wolfe's site and it shows the bar way in front of the rear speakers. I hope mine is that way.
<small>[ November 22, 2002, 08:25 PM: Message edited by: Chad00ws6 ]</small>
I still want to verify but do the rear bars go through my speaker area or in front of them?
<img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
I just looked at the photos on Wolfe's site and it shows the bar way in front of the rear speakers. I hope mine is that way.
<small>[ November 22, 2002, 08:25 PM: Message edited by: Chad00ws6 ]</small>
#14
TECH Junkie
Join Date: Jan 2002
Location: At the office
Posts: 3,015
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by tbyrne:
<strong>Closing date for this GP will be Monday, December 2nd. I checked this morning and found that we haven't seen any orders come in yet.
Tom
www.tbyrnemotorsports.com</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Hang in their Tom, I'm going to be placing my order with you shortly.
<strong>Closing date for this GP will be Monday, December 2nd. I checked this morning and found that we haven't seen any orders come in yet.
Tom
www.tbyrnemotorsports.com</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Hang in their Tom, I'm going to be placing my order with you shortly.
#16
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
If they are the same that Wolfe shows on their site then they will not go anywhere near the speaker and I don't want the ones that mount behind the seat because I want to keep as much room as possible. <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
Anyone know how many confirmed orders there are so far. This is going to be a must have for me no if ands or buts about it. <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />
Anyone know how many confirmed orders there are so far. This is going to be a must have for me no if ands or buts about it. <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />
#18
TECH Junkie
Join Date: Jan 2002
Location: At the office
Posts: 3,015
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by tbyrne:
<strong>There are 2 orders in as of this morning.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I need a 5 pt cage and every time I call your place the person I need to talk to isn't available. I need a price quote for a 5pt chromemoly weld in with driver side swingout and removable crossbar.
<img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
<strong>There are 2 orders in as of this morning.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I need a 5 pt cage and every time I call your place the person I need to talk to isn't available. I need a price quote for a 5pt chromemoly weld in with driver side swingout and removable crossbar.
<img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
#19
TECH Fanatic
iTrader: (3)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Tom, count me in for a 4 point cromoly weld in for a rag-top w/a removable cross-bar bare or in flat black. NO powder coating for me please. <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
Need a delivered (30062) price please
email= jabz28@mindspring.com
Thanks.
<small>[ November 25, 2002, 02:51 PM: Message edited by: Jimmyz ]</small>
Need a delivered (30062) price please
email= jabz28@mindspring.com
Thanks.
<small>[ November 25, 2002, 02:51 PM: Message edited by: Jimmyz ]</small>
#20
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I went back and e-mailed every one that said they wanted one from the original post. I need this roll cage in a bad way <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> So let's make it happen if at all possible.