whats up everyone...I'm Eric new to the forum I'm from San Antonio Texas i drive a 1999 Camaro Z28 full bolt-on's with some suspension my best time was a 12.5 So my next step is a cam cant wait

 

Welcome to the site from a fellow texan. What kind of cam are thinking? What specs?

 

Thanks man well i was thinking either the MS3 or the torquer v3 but i think im leaning more to the MS3 cam...I hear nothing but good stuff on the MS3 cam

 

Either cam would be a good choice. You planning on gettin it from Texas Speed? The ms3 is a good cam, but so is the torquer. Personally, I would go with a little bit smaller cam and a good set of heads, more under the curve power, or just use one of those cams with some heads.

 

yeah im gna order the MS3 from texas speed....i was thinking of getting the the stage 2.5 z06 heads or the 5.3l stage 2.5 heads they said those r good too..idk still undecided what heads too go with..need to look around some more

 

what u got in ur car bro

 

another welcome from a fellow texan

 

Thanx bud

 

Welcome, thats a very respectable time. Is your car an M6 or A4???

 

Thanx bud...my car is an auto

 

I only have bolt-ons for now, I have a lid, maf, p/p tb, 3" catback with cutout, and no cats. I have basically a full hooker exhaust,that I haven't put on yet. Lt headers, 3" y-pipe, hooker aerochamber muffler, and the exhaust tips from hooker as well. I am just gonna replcae the muffler on the exhaust that I have now and the tips.

I have some pretty big plans for it, so that's pretty much why it has just been tho bolt-ons for a while now, saving the money.

I would like to get a stroker kit for it, 383, and get the h/c to match for a lower compression motor for boost. I kinda want a procharger, or a turbo setup, and then a 9' rear with 3.73s, a lvl3 trans with a vig 3600, and then suspension work.

But for now seeing as how it is my dd, I may just put a small cam in it and about a yank 3200 or so, and call it good until I get all the money I will need saved up. I have started working on the saving, but that's alot of money lol.

 

yeah i hear u on the cash everything is preety expensive..u got the super comps hookers or what....have u takin ur car to the track..what part of texas ur from?

man dude i noticed alot after i put in my stall and a tune i used to run 13.2's without a stall and a tune but i had all my bolt-ons on but my car ran crappy that day when i put on the 30 pound injectors.....i put the stall and tuned it it ran a 12.6...i put the suspension that i have now 12.5's not bad huh

 

Yeah, I got the super comps, ceramic coated. A 12.5 is nice man, I've never gotten down to a track, but I know my car runs strong. I'm shootin to get it into the mid 12's just for dd duty, and then when I get a new dd, put it in the garage and seriously go to work.

I'm from north central texas, about 45 minutes from Wichita Falls if you know where that is.

 

welcome. I live down here in Corpus but, family lives in S.A. I usually go up that way about once a month. welcome on baord.....

 

Welcome to the site. Nice ride, and great times! This is the place to be if your planning on continuing modding/improving your ride. Lots of experienced folks on here and a wealth of information is all here just at the touch of the search button when you have questions on tried and true cam/head packages etc. Good luck in your modding and hope to see you around often.

 

nice super comps ceramic coated...yeah i hear u man...i have another vehicle too but i wrecked it but its almost dont tho nothing major just lil things..once i get it going im gna cam my car cant wait ..

i dont know where that is..is a small town or what

 

thanx man.. really i got some friends that live at corpus they always invite me to go but i nvr get the chance to head up there..but ill go someday been wanting to go to the beach


what do u got on ur trans am....do u go to any car meets here in san antonio

 

thanks alot bud your right theres alot of good advice here im planning on going cam next

 

Yeah, wichita falls is small compared to San Antonio, but where i live is like 10,000 people barely. Anyway good luck with the car man, let us knwo what cam and heads you end up with.

 

Welcome to the site.