Build Your own FWI CAI Thread...
Thread Starter
Launching!
Joined: Mar 2010
Posts: 265
Likes: 0
From: Morristown, IN
Build Your own FWI CAI Thread... Essentially I started this for the people who want a fwi cold air intake but have found that making your own is the way to go.
We can use this thread to discuss ideas, what works and what doesn't...
I was thinking about using dryer ducting as a template to measure angles, then ordering the parts through jegs or wherever...
For size I was thinking 4 inch like the JMB but not sure until I take some good measurements.
Anyone already have one they would like to share?
I guess one of the fun things about these cars is that some things you have to do yourself.
We can use this thread to discuss ideas, what works and what doesn't...
I was thinking about using dryer ducting as a template to measure angles, then ordering the parts through jegs or wherever...
For size I was thinking 4 inch like the JMB but not sure until I take some good measurements.
Anyone already have one they would like to share?
I guess one of the fun things about these cars is that some things you have to do yourself.
This is what I'll be buying for tubing.
http://www.zzperformance.com/grand_p...=319&catid=113
used it on my gtp with great results.
I'm just gonna get a couple silicone pieces if need to connect things.
http://www.zzperformance.com/grand_p...=319&catid=113
used it on my gtp with great results.
I'm just gonna get a couple silicone pieces if need to connect things.
TECH Enthusiast
Joined: Jun 2008
Posts: 621
Likes: 1
From: Zeeland, MI
www.siliconeintakes.com will be your friend...should cost between 100-140 if you use parts from their site and a good cone filter 7-9inches.
indynotch50 what kind/ type filter do you have? i have a 4'' dai. maybe 4''-5'' long filter k&n and it fits perfectly in the fender. i used piping from autozone. if you need help on the angles i can help
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
it is a 45 degree off the throttle body into maf then a 3'' striaght piece to a 6'' striaght piece to another 3'' striaght piece (had to be that way cause of the coolant bottle) to a 60 degree then right into the k&n filter. the filter is getting the air that goes through the hole right under the turn signal so it gets clean/ cold air
as for my ecm/tcm nothing is holding it down right now but it does not move really at all
if anyone needs more help or more pics let me know i can take the wheel well out so you can see the filter placement and things
as for my ecm/tcm nothing is holding it down right now but it does not move really at all
if anyone needs more help or more pics let me know i can take the wheel well out so you can see the filter placement and things
Teching In
Joined: Jul 2009
Posts: 22
Likes: 0
From: N. Illinois
http://www.spectreperformance.com/#HOME
Found this site tonight, they have a nice build your own intake section.
Found this site tonight, they have a nice build your own intake section.
I used this stuff to make an intake for my cousin and my buddy. I also used an open cone S&B filter. Under a hundred bucks and looks clean.
http://www.siliconeintakes.com/produ...281460dddbcc36
http://www.siliconeintakes.com/produ...281460dddbcc36
http://www.siliconeintakes.com/produ...281460dddbcc36
http://www.siliconeintakes.com/produ...281460dddbcc36
http://www.siliconeintakes.com/produ...281460dddbcc36
http://www.siliconeintakes.com/produ...281460dddbcc36
Thread Starter
Launching!
Joined: Mar 2010
Posts: 265
Likes: 0
From: Morristown, IN
This is what I'll be buying for tubing.
http://www.zzperformance.com/grand_p...=319&catid=113
used it on my gtp with great results.
I'm just gonna get a couple silicone pieces if need to connect things.
http://www.zzperformance.com/grand_p...=319&catid=113
used it on my gtp with great results.
I'm just gonna get a couple silicone pieces if need to connect things.
Check out intense racing. I think they have one made of this that works great.
I'm just not a fan of the looks.