ideal transmission fluid temp
#1
TECH Enthusiast
Thread Starter
ideal transmission fluid temp
I recently got the App Torque on my phone. I have been monitoring my trans temp today.
It seems to stay around 200-210....it is about 94F today
is that an alright temp? i know i want to do the tranny cooler soon. What kind of temps might i see with a cooler?
thanks guys
It seems to stay around 200-210....it is about 94F today
is that an alright temp? i know i want to do the tranny cooler soon. What kind of temps might i see with a cooler?
thanks guys
#2
On The Tree
Join Date: Apr 2011
Location: Kenosha, WI
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
it was 95 today, after about 1 hour driving, including sitting 5 mins in MCD's drive thru, a/c on, it got to 186, highest Ive ever seen my trans get was 191
I have a 6 pass flexalite cooler from JEGS
I have a 6 pass flexalite cooler from JEGS
#3
TECH Enthusiast
Thread Starter
Trending Topics
#10
I recently got the App Torque on my phone. I have been monitoring my trans temp today.
It seems to stay around 200-210....it is about 94F today
is that an alright temp? i know i want to do the tranny cooler soon. What kind of temps might i see with a cooler?
thanks guys
It seems to stay around 200-210....it is about 94F today
is that an alright temp? i know i want to do the tranny cooler soon. What kind of temps might i see with a cooler?
thanks guys
#11
http://torque-bhp.com/
and
http://torque-bhp.com/wiki/Main_Page
Wes
#13
okay i installed the app, cool gismo, but i don't see the transmission temperature option?
and do you have to go bluetooth with it? i have this adaptor from vince at trifecta but it's usb.
and do you have to go bluetooth with it? i have this adaptor from vince at trifecta but it's usb.
#14
TECH Enthusiast
Thread Starter
make sure you load the GM PIDs in the settings.
if you have any other questions ask cus sometimes the app likes to be difficult to set up the first time
#16
On The Tree
Join Date: Apr 2011
Location: Kenosha, WI
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
few hours install in my garage
http://s242.photobucket.com/albums/f.../trannycooler/
Used that as a guide, I also used the air hose splicers he used in that how-to, also double clamped only the cooler side, not the spliced side as the clamps i got wouldnt clamp properly with two on the splicer. The mounting location will have to be different, I put mine in front of the condenser resting on the lower plastic cover.
This is the cooler I bought, but the one you posted would work too, its bigger and will probably cool slightly better
http://www.jegs.com/i/Flex-a-lite/40...oductId=756324
http://s242.photobucket.com/albums/f.../trannycooler/
Used that as a guide, I also used the air hose splicers he used in that how-to, also double clamped only the cooler side, not the spliced side as the clamps i got wouldnt clamp properly with two on the splicer. The mounting location will have to be different, I put mine in front of the condenser resting on the lower plastic cover.
This is the cooler I bought, but the one you posted would work too, its bigger and will probably cool slightly better
http://www.jegs.com/i/Flex-a-lite/40...oductId=756324
Last edited by rvd9431; 08-01-2011 at 04:55 PM.
#20