WTS: 1 set of 2000 WS6 rims w/Nitto 555s used
#1
WTS: 1 set of 2000 WS6 rims w/Nitto 555s used
Sioux City IA, USA
1 set of stock 2000 WS6 17X9 rims(used about 43k miles) with Nitto 555s 275 used (about 16k miles). Looks like there may be 5000 miles worth of tread on the tires(with no burnouts).
The tires were rotated every 3000-5000 miles. One of the tires shoulder is worn a little more than the rest. The tire guy at Sams club took the wheels off the car but forgot to rotate them on one side of the car. I didn't notice until a buddy saw the wear on the front right tire.
There is curb rash on 3 of the rims from the first owner! The rash is a few dings no more than 1/2inch to and inch long. They are only noticeable if you are close up to the rims. I am really picky about stuff like this but this didnt really bother me to much the 3 years I have driven the car because the dings arent to noticeable.
One of the center caps has a couple of the clips broken off but may be able to be glued.
The clear coat is intact.
Heres a link to the thread I made with new wheels i put on. There is a pic of the left rear wheel. I will clean up the wheels and post more pics. Pics on page 3 of link:https://ls1tech.com/forums/wheels-ti...ims-out-3.html
EDIT * local pick up only. $375
ADD- I forgot to say these tires are nitrogen filled.
1 set of stock 2000 WS6 17X9 rims(used about 43k miles) with Nitto 555s 275 used (about 16k miles). Looks like there may be 5000 miles worth of tread on the tires(with no burnouts).
The tires were rotated every 3000-5000 miles. One of the tires shoulder is worn a little more than the rest. The tire guy at Sams club took the wheels off the car but forgot to rotate them on one side of the car. I didn't notice until a buddy saw the wear on the front right tire.
There is curb rash on 3 of the rims from the first owner! The rash is a few dings no more than 1/2inch to and inch long. They are only noticeable if you are close up to the rims. I am really picky about stuff like this but this didnt really bother me to much the 3 years I have driven the car because the dings arent to noticeable.
One of the center caps has a couple of the clips broken off but may be able to be glued.
The clear coat is intact.
Heres a link to the thread I made with new wheels i put on. There is a pic of the left rear wheel. I will clean up the wheels and post more pics. Pics on page 3 of link:https://ls1tech.com/forums/wheels-ti...ims-out-3.html
EDIT * local pick up only. $375
ADD- I forgot to say these tires are nitrogen filled.
Last edited by ninjamaster; 03-31-2009 at 01:35 PM.
#4
Here are more pics as promised. I didnt have time to clean the wheels but this is better than nothing. I feel bad because at closer inspection there is more curb rash on them than I originally saw before. There are a couple longer areas as seen in the pics but again I didnt notice them until I was upclose and taking pics. I think its because of the reflective aluminum surface and the fact that the scratches are the same color and brightness.
Anyways here you go.
Pics taken as if standing in front of the car:
Front left damage:
Back Left damage: Barely scuffed, mostly clear coat
Front Right damage:
Back Right:
looked good.
Tire wear examples:
FL: Both shoulders of the current fronts the most wear on them.
BL:
Anyways here you go.
Pics taken as if standing in front of the car:
Front left damage:
Back Left damage: Barely scuffed, mostly clear coat
Front Right damage:
Back Right:
looked good.
Tire wear examples:
FL: Both shoulders of the current fronts the most wear on them.
BL:
#6
EDIT *sale was pending. Shipping is way to much for these wheels. i am going to sell these locally as pick up only asking $375.
Last edited by ninjamaster; 03-31-2009 at 03:06 AM.
Trending Topics
#16
I went into fedex kinkos and they wanted $288 ground after discount. $394 priority. Is it cheaper to bring them to an actual fedex warehouse? Maybe ups?
dimensions were 26x26x20 100lbs per package X 2.
dimensions were 26x26x20 100lbs per package X 2.
#17
I'll call them! thanks
edit* just called them and got a quote, $91 per set! not gonna use this method although its still cheaper than fedex. Oh, theres a 100lb weight limit.
edit* just called them and got a quote, $91 per set! not gonna use this method although its still cheaper than fedex. Oh, theres a 100lb weight limit.
Last edited by ninjamaster; 04-07-2009 at 03:57 PM.
#18
If you enter your info on ups.com (i did), from Sioux City, IA to Manchester, MI (where i live) is $167. Are you willing to deal on rim price if i pay all shipping costs?