Corvette Kenne Bell Twin Screw LS2 COMPLETE system for Sale with Hood! @CHEAP@
08-15-2009, 06:42 PM
#1
11 Second Club
Thread Starter
iTrader: (48)
Join Date: Jan 2006
Location: Corona, California
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
Corvette Kenne Bell Twin Screw LS2 COMPLETE system for Sale with Hood! @CHEAP@ Kenne Bell 2.6H Twin Screw Blower
Heat Exchanger Water to Air
Kenne Bell Boost A Pump
Aeromotive High Flow Fuel Rails
60# Injectors
Air intake tube and high flow K&N Filter
8 Rib UPGRADED pulley system
Upgraded Belt Tensioner
Power steering bracket
Including belt (always recommend new ones)
INCLUDING A HOOD!
Purchase the system and you can take my Kooks coated long tube 1 7/8 Headers for only $500 more
Purchase the system and you can take my Alkycontrol Meth injection system for only $400 more
Purchase the system and you can take my Coil relocation kit with Custom Taylor 10.4 Wires for $300 more
RECESSION PRICE: $4800 plus shipping and insurance
Features:
Self contained oiling system (No need to drill and tap to get oil to your supercharger)
Self Venting Pulley Bolt
Powder coated gloss finish bypass tube
Billet External Bypass Valve
Universal bracket adapts to cable or electronic throttle bodies
93MM Hi Flo inlet manifold (accepts 76 or 90mm tb)
High efficiency Bar and Plate Intercooler
Billet front mount drive
Billet steel pulley
Pre-assembled kit for ease of installation
“Big Block” feel at any engine or vehicle speed, not just peak rpm.
More low and mid range torque and HP because it makes more boost there.
Quick and easy 4 minute pulley changes (5-18 psi).
Twin Screw efficiency (cooler air charge temp, lower parasitic loss).
Serviceable. Supercharger can be rebuilt.
Kit is set at 11PSi of boost, with a quick change of the pulley, you can adapt to your power levels
Stock LS2 motor with a Torco tune, car put down 589RWHP 569RWTQ
Motor has 100K miles and compression is perfect, tune is spot on, and will include a Hp tuners file to get you started.
More Info: http://www.kennebell.net/supercharge...gmCorvette.htm
Selling this kit as it is easier to part out my car and sell it rather then have it with the mods. Moving to a Z06 project and finishing up my other C6 so I've decided
to part with this car first. Price is rock bottom and ultra cheap. Included is almost everything
you need to have this system installed on your Vette. The only thing missing would be the Oil relocation kit, which TPE sells. If you feel like having a 200 Shot of Nitrous at any RPM on tap this is the system for you. PM me with any questions. System will be off on Monday August 17th, and ready to ship on Tuesday. Not sure, but this may work on an LS1 as well.
Heat Exchanger Water to Air
Kenne Bell Boost A Pump
Aeromotive High Flow Fuel Rails
60# Injectors
Air intake tube and high flow K&N Filter
8 Rib UPGRADED pulley system
Upgraded Belt Tensioner
Power steering bracket
Including belt (always recommend new ones)
INCLUDING A HOOD!
Purchase the system and you can take my Kooks coated long tube 1 7/8 Headers for only $500 more
Purchase the system and you can take my Alkycontrol Meth injection system for only $400 more
Purchase the system and you can take my Coil relocation kit with Custom Taylor 10.4 Wires for $300 more
RECESSION PRICE: $4800 plus shipping and insurance
Features:
Self contained oiling system (No need to drill and tap to get oil to your supercharger)
Self Venting Pulley Bolt
Powder coated gloss finish bypass tube
Billet External Bypass Valve
Universal bracket adapts to cable or electronic throttle bodies
93MM Hi Flo inlet manifold (accepts 76 or 90mm tb)
High efficiency Bar and Plate Intercooler
Billet front mount drive
Billet steel pulley
Pre-assembled kit for ease of installation
“Big Block” feel at any engine or vehicle speed, not just peak rpm.
More low and mid range torque and HP because it makes more boost there.
Quick and easy 4 minute pulley changes (5-18 psi).
Twin Screw efficiency (cooler air charge temp, lower parasitic loss).
Serviceable. Supercharger can be rebuilt.
Kit is set at 11PSi of boost, with a quick change of the pulley, you can adapt to your power levels
Stock LS2 motor with a Torco tune, car put down 589RWHP 569RWTQ
Motor has 100K miles and compression is perfect, tune is spot on, and will include a Hp tuners file to get you started.
More Info: http://www.kennebell.net/supercharge...gmCorvette.htm
Selling this kit as it is easier to part out my car and sell it rather then have it with the mods. Moving to a Z06 project and finishing up my other C6 so I've decided
to part with this car first. Price is rock bottom and ultra cheap. Included is almost everything
you need to have this system installed on your Vette. The only thing missing would be the Oil relocation kit, which TPE sells. If you feel like having a 200 Shot of Nitrous at any RPM on tap this is the system for you. PM me with any questions. System will be off on Monday August 17th, and ready to ship on Tuesday. Not sure, but this may work on an LS1 as well.
08-15-2009, 11:57 PM
#3
TECH Regular
iTrader: (12)
Join Date: Mar 2003
Location: Hershey, PA
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
Will this fit hood & S/C kit fit my 2000 fixed roof coupe C5?????
Only kidding, bump for a very nice setup. I have P1, but love the Kenne Bell setups, instant torque & hp, VERY NICE!!!
Only kidding, bump for a very nice setup. I have P1, but love the Kenne Bell setups, instant torque & hp, VERY NICE!!!
