FS: A&A Vortech YSi, L19 Headstuds, Cam, Timing Set, More!!!
10-01-2009 | 10:27 AM
#1
FS: A&A Vortech YSi, L19 Headstuds, Cam, Timing Set, More!!! I have started another thread, because the title had expired due to the parts sold in my last thread.
Well, I have yet, once again, decided to go another route with my car. So, my loss becomes someone else's gain. I am not including shipping in any of the prices and of course, everything is OBO.
The reason some of these parts have so few miles on them is simple. I barely have time to drive the car to begin with, but on top of that after I started having clutch issues (About 75 miles after installing the blower), I loaned my car to Racing Solutions Inc. at the first of the year so that they could prototype a complete fuel system for the C5 guys, and I just got the car back last week. As the car was sitting at RSI I had contemplated selling the car complete and just washing my hands of it, but I love this car and decided to do an all motor setup. So there you have it, pretty simple explanation why these parts are as new as they are. All parts came off of a 2002 C5 Z06.
TPE 8-rib Pulley Set - $350
I bought these from Jeff @ TPE thinking I wouldnt need a tensioner pulley. So, if you need one, you might contact Jeff, I'm sure he'll hook you up. Comes with everything needed to install. Power-Steering, Idler, & Alternator Pulley.
Custom Coil Pack Relocation Kit - $110
I made these with several different parts. They include; brackets, MSD mock up wires, and coil pack wiring extensions. Coil packs not included.
Baer Eradispeed Rotors +1 - $200
Good shape, used for about 1500 miles.
Mr. Gasket Hood Pin Kit - $5
Brand new. I planned on needing this for a future project. Just never used it.
Pfadt FRC Chassis Bar - $650
Brand new, never been installed. I bought this a few months back and have decided not to use it. It is DOM, unpainted. Comes with instructions and all hardware.
Feel free to contact me via PM, electricmetalx@yahoo.com, or 940.389.9534 if you have any questions. My name is Patrick, and I have 100% positive feedback on every site I am on; Supraforums, LS1Tech, Ebay, ect.
Well, I have yet, once again, decided to go another route with my car. So, my loss becomes someone else's gain. I am not including shipping in any of the prices and of course, everything is OBO.
The reason some of these parts have so few miles on them is simple. I barely have time to drive the car to begin with, but on top of that after I started having clutch issues (About 75 miles after installing the blower), I loaned my car to Racing Solutions Inc. at the first of the year so that they could prototype a complete fuel system for the C5 guys, and I just got the car back last week. As the car was sitting at RSI I had contemplated selling the car complete and just washing my hands of it, but I love this car and decided to do an all motor setup. So there you have it, pretty simple explanation why these parts are as new as they are. All parts came off of a 2002 C5 Z06.
TPE 8-rib Pulley Set - $350
I bought these from Jeff @ TPE thinking I wouldnt need a tensioner pulley. So, if you need one, you might contact Jeff, I'm sure he'll hook you up. Comes with everything needed to install. Power-Steering, Idler, & Alternator Pulley.
Custom Coil Pack Relocation Kit - $110
I made these with several different parts. They include; brackets, MSD mock up wires, and coil pack wiring extensions. Coil packs not included.
Baer Eradispeed Rotors +1 - $200
Good shape, used for about 1500 miles.
Mr. Gasket Hood Pin Kit - $5
Brand new. I planned on needing this for a future project. Just never used it.
Pfadt FRC Chassis Bar - $650
Brand new, never been installed. I bought this a few months back and have decided not to use it. It is DOM, unpainted. Comes with instructions and all hardware.
Feel free to contact me via PM, electricmetalx@yahoo.com, or 940.389.9534 if you have any questions. My name is Patrick, and I have 100% positive feedback on every site I am on; Supraforums, LS1Tech, Ebay, ect.
Last edited by Overboosted; 10-10-2009 at 08:13 PM.
