15x4 Centerline Telstars w/ tires

 
Thread Tools
 
Search this Thread
 
Old 03-07-2005 | 09:40 PM
  #1  
The LT1 That Could's Avatar
Thread Starter
12 Second Club
iTrader: (3)
 
Joined: Dec 2002
Posts: 1,383
Likes: 1
From: Lubbock, TX
Default 15x4 Centerline Telstars w/ tires - SOLD!!

Around 8 months old, but car was very rarely driven, it's a 130K mile LT1..what can I say?
Come w/ Arizonian 165r/15's.
Fit f-bodies w/o grinding.
15x4 | 5x4.75 | 1 5/8 BS
Front's only
$270 Plus shipping.
Will Trade for Draglite Fronts.
One pic attached also

bo_novak@sbcglobal.net
AIM - TheLT1thatCOULD
Attached Thumbnails 15x4 Centerline Telstars w/ tires-telstars.jpg  

Last edited by The LT1 That Could; 03-28-2005 at 08:58 PM. Reason: sold
Old 03-07-2005 | 11:19 PM
  #2  
1QuickT-A's Avatar
10 Second Club

iTrader: (12)
 
Joined: Dec 2004
Posts: 2,034
Likes: 0
From: Birmingham, Alabama
Default

Do they stick out of the fender well at all in the front? and what size tire did you have on the rear with the telstars cause they dont have the right backspacing for fbodies so I'm curious on the rear tire size..
Old 03-08-2005 | 07:23 PM
  #3  
The LT1 That Could's Avatar
Thread Starter
12 Second Club
iTrader: (3)
 
Joined: Dec 2002
Posts: 1,383
Likes: 1
From: Lubbock, TX
Default

they sit very flush with the fenderwell...dont stick out all ghetto but they do sit VERY flush. I will remount them and get a pic....

for the 2 weeks i had rear telstars, lol I ran a 26x9x15 Hoosier slick on a 15x7 rim
the most common street tire for them is a 275/50/15, but they stick out pretty far.
http://www.geocities.com/jmaxnakron/..._TELSTARS.html
&
http://bedford.no-ip.org/Centerline_Telstars.htm

i would run a 15x7 rim 5" BS (no 5.5" available as far as i know) and a 255/50/15, which i think BFG and M/T make those in their drag radial line. A 275 would fit on the 7" rim also..but not sure on how it would look.

That would be something similar to the 9" hoosier. which looks like this.
http://trevor98ramair.cz28.com/photo4.html
Old 03-12-2005 | 05:19 PM
  #4  
The LT1 That Could's Avatar
Thread Starter
12 Second Club
iTrader: (3)
 
Joined: Dec 2002
Posts: 1,383
Likes: 1
From: Lubbock, TX
Default

to the top
Old 03-23-2005 | 01:37 PM
  #5  
The LT1 That Could's Avatar
Thread Starter
12 Second Club
iTrader: (3)
 
Joined: Dec 2002
Posts: 1,383
Likes: 1
From: Lubbock, TX
Default

t.t.t.
Old 03-23-2005 | 03:01 PM
  #6  
Midnite_LS1's Avatar
TECH Apprentice
iTrader: (26)
 
Joined: Jan 2004
Posts: 322
Likes: 0
Default

TTT for The LT1 That Could not do a damn thing....j/k
Old 03-27-2005 | 08:59 PM
  #7  
The LT1 That Could's Avatar
Thread Starter
12 Second Club
iTrader: (3)
 
Joined: Dec 2002
Posts: 1,383
Likes: 1
From: Lubbock, TX
Default

t.t.t.
Old 03-27-2005 | 09:08 PM
  #8  
Big Daddy's Avatar
Staging Lane
iTrader: (2)
 
Joined: Mar 2003
Posts: 99
Likes: 0
From: Grand Prairie tx
Default

Do you have to have a spacer or grind the calipers?
Old 03-27-2005 | 09:11 PM
  #9  
Shon Herron's Avatar
TECH Fanatic
iTrader: (25)
 
Joined: Nov 2001
Posts: 1,784
Likes: 0
From: SC
Default

These fit with out any problems. I had to bend the brake pad clip that is on the outside of the caliper to clear but I have a slightly thicker rotor and new pads.
Old 03-28-2005 | 08:57 PM
  #10  
The LT1 That Could's Avatar
Thread Starter
12 Second Club
iTrader: (3)
 
Joined: Dec 2002
Posts: 1,383
Likes: 1
From: Lubbock, TX
Default

they do fit w/o grinding, but i just SOLD these man, sorry.
 




All times are GMT -5. The time now is 05:50 PM.