Custom Diamond pistons - Low compression 383
07-02-2005, 09:27 AM
#1
On The Tree
Thread Starter
iTrader: (10)
Join Date: Oct 2003
Location: Austin, TX
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Custom Diamond pistons - Low compression 383 Well, I've run out of money for my current project, so its time to sell off extraneous parts. These should be perfect for somone looking to build a 383 stroker wth low compression for a blower or turbo (the pistons have a -26cc dish). Compression should be in the 8.6:1 range with 64cc heads and a GM MLS gasket.
Here's what it says on the card:
bore= 3.905"
Compression height= 1.115
Valve depth intake=.175 exhaust=.175
top ring= 1.5
oil ring=3mm
2nd ring=1.5
support rail= 01-9001-905
wrist pin diameter= .927
wrist pin length= 2.950
Offset pin= yes
Put the F towrds the front of the motor
wrist pin lock part# 01-5104
wrist pin lock description: Double spirolox
Piston weight= 413 grams
install these pistons with .004 clearance measured 90 degrees to the pin hole @ 1.250 down from the oil ring.
The wrist pins and spirolox locks are included.
I'd like to get $400 shipped. They're just taking up space in my shop at this point, and I'd like to see them gone. Drop me a PM if interested.
Here's what it says on the card:
bore= 3.905"
Compression height= 1.115
Valve depth intake=.175 exhaust=.175
top ring= 1.5
oil ring=3mm
2nd ring=1.5
support rail= 01-9001-905
wrist pin diameter= .927
wrist pin length= 2.950
Offset pin= yes
Put the F towrds the front of the motor
wrist pin lock part# 01-5104
wrist pin lock description: Double spirolox
Piston weight= 413 grams
install these pistons with .004 clearance measured 90 degrees to the pin hole @ 1.250 down from the oil ring.
The wrist pins and spirolox locks are included.
I'd like to get $400 shipped. They're just taking up space in my shop at this point, and I'd like to see them gone. Drop me a PM if interested.
07-10-2005, 08:12 AM
#5
On The Tree
Thread Starter
iTrader: (10)
Join Date: Oct 2003
Location: Austin, TX
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Arkangel77
I dont guess you got a set for a LT1 Aplication do ya?
