PORTED POLISHED Bowtie Heads w Stainless Valves for SBC
11-22-2005, 10:56 PM
#1
10 Second Club
Thread Starter
iTrader: (20)
Join Date: Feb 2005
Location: Winston-Salem, NC
Posts: 1,340
Likes: 0
Received 0 Likes
on
0 Posts
PORTED POLISHED Bowtie Heads w Stainless Valves for SBC My dad was going to use these in his Camaro, but now he's decided to not even build the Camaro! Instead of letting the heads sit, we decided to pass these on to another enthusiast.
http://cgi.ebay.com/ebaymotors/ws/eB...tem=8017218658
These heads flowed 266/194 with the 2.05/1.60 stainless valves we just had installed! Comp Cams #986-16 springs are installed on the heads as well.
Any questions, feel free to ask!
http://cgi.ebay.com/ebaymotors/ws/eB...tem=8017218658
These heads flowed 266/194 with the 2.05/1.60 stainless valves we just had installed! Comp Cams #986-16 springs are installed on the heads as well.
Any questions, feel free to ask!
11-23-2005, 10:53 AM
#4
10 Second Club
Thread Starter
iTrader: (20)
Join Date: Feb 2005
Location: Winston-Salem, NC
Posts: 1,340
Likes: 0
Received 0 Likes
on
0 Posts
Forgot to add - these heads have been Shaved to 58cc chambers! The machinist told me that the porting/polishing job was one of the best he's ever seen.
Last edited by JoeyAnderson; 11-24-2005 at 12:51 PM.
Trending Topics
11-29-2005, 07:38 AM
#9
10 Second Club
Thread Starter
iTrader: (20)
Join Date: Feb 2005
Location: Winston-Salem, NC
Posts: 1,340
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by just-a-z
what do you think these will push in my ls1.
Mods- 232/236 cam 112 LSA, Full Bolt ons, 90/90 Setup, SS3600 Yank, 42 Lbs injectors
Mods- 232/236 cam 112 LSA, Full Bolt ons, 90/90 Setup, SS3600 Yank, 42 Lbs injectors
These are for early SBC only.
