Wheel to Wheel turbo LS2 long block for sale
06-09-2006, 11:15 AM
#1
TECH Apprentice
Thread Starter
Join Date: Jul 2005
Location: Wilton Ca. (Sacramento)
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
Wheel to Wheel turbo LS2 long block for sale new LS2 block
billet caps
ARP main studs
Callies 4" crank
Mahle turbo pistons
Howards rods
ported oil pump
MLS head gaskets
Morel lifters
custom roller cam
lifter trays
new rockers and hardware
custom restricted pushrods
heavy duty timing chain and gears, dampner
ARP head studs
ET Performance CNC 245 11 degree heads
LS2 front cover and gaskets
LS2 valley cover and gaskets
LS2 rear cover and gaskets
billet valve cover spacers
fully machined, balanced, and assembled by Wheel to Wheel.
COST TO BUILD IS OVER $13k. Was in my 05 GTO for approximately 100 miles. Runs excellent but have ordered a new Z06 and am selling the GTO, so I put the stock LS2 back in the car and am selling the mods.
As new, will sell for $9K plus shipping. Paypal will be 3% higher. Save over $4K on a new setup, and you don't have to wait 4-8 weeks to have one built. Would work great with a blower also, although I would change cams at that point. The custom cam is a turbo grind.
Jody
billet caps
ARP main studs
Callies 4" crank
Mahle turbo pistons
Howards rods
ported oil pump
MLS head gaskets
Morel lifters
custom roller cam
lifter trays
new rockers and hardware
custom restricted pushrods
heavy duty timing chain and gears, dampner
ARP head studs
ET Performance CNC 245 11 degree heads
LS2 front cover and gaskets
LS2 valley cover and gaskets
LS2 rear cover and gaskets
billet valve cover spacers
fully machined, balanced, and assembled by Wheel to Wheel.
COST TO BUILD IS OVER $13k. Was in my 05 GTO for approximately 100 miles. Runs excellent but have ordered a new Z06 and am selling the GTO, so I put the stock LS2 back in the car and am selling the mods.
As new, will sell for $9K plus shipping. Paypal will be 3% higher. Save over $4K on a new setup, and you don't have to wait 4-8 weeks to have one built. Would work great with a blower also, although I would change cams at that point. The custom cam is a turbo grind.
Jody
Last edited by camcojb; 06-26-2006 at 10:21 AM.
06-11-2006, 02:36 PM
#7
TECH Apprentice
Thread Starter
Join Date: Jul 2005
Location: Wilton Ca. (Sacramento)
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Greeny5005
Bump for an awesome seller, ive bought many things from him on GTO sites and would do have no problem buying anything from him again.
Thanks, much appreciated!
Trending Topics
06-12-2006, 12:04 AM
#8
TECH Fanatic
iTrader: (1)
Join Date: Oct 2002
Location: Elmhurst, IL (Chicago Suburb)
Posts: 1,851
Likes: 0
Received 0 Likes
on
0 Posts
Killer deal on a killer turbo motor put together by a speed shop with one of the top reputations for sure!! This will make the perfect high boost turbo motor for someone that will make STUPID POWER for sure!! 
06-12-2006, 08:55 AM
#10
TECH Apprentice
Thread Starter
Join Date: Jul 2005
Location: Wilton Ca. (Sacramento)
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Frost
What are the cam specs?
Lobe separation 116 degrees
Intake Valve lift - .60015 Duration @ .050 - 235.9 centerline 112
Exhaust Valve lift - .59547 Duration @ .050 - 231 centerline 120
and save for another car
06-25-2006, 10:27 AM
#16
TECH Apprentice
Thread Starter
Join Date: Jul 2005
Location: Wilton Ca. (Sacramento)
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
Save over $3K on a professionally built 402 forced induction setup. Less than 100 miles, no issues whatsoever, just decided to get a different car so am returning to stock.
Jody
Jody
