Boyd Coddington 18" X 9" Smoothie II's Cheap! Possible Trade For Parts!
06-13-2006, 09:39 AM
#1
On The Tree
Thread Starter
Join Date: Jun 2004
Location: Boston, MA
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Boyd Coddington 18" X 9" Smoothie II's Cheap! Need the cash! SOLD!!!
Looking to sell my Boyds, just couldn't keep up with the polishing on my daily driver. These are not perfect, they have 2 years of street duty on them and need polishing, and have some curbing. The ones I had on the front hit a bad pothole and had a small dent on the back of the rim from the impact to the tire. The tires didnt go flat, but i could feel the out of round feeling, I was on vacation and took a hammer to them to get them back to round and the vibration went away. I drove the car like that for another 6 months before it got put away for winter and I put these in my garage. I took them out this year when I bought new wheels and took the tires off. Took this pic after I quickly polished two of them just before I took the tires off.
Like I said these are not perfect, I am honest and would not mislead members of this forum. The rears never had a problem and just need a polish, it was just the fronts that were affected by the pothole.
Again if you are picky these wont work for you unless you are going to make them perfect, not that tough on an aluminum wheel but none the less they arent perfect.
I ran them the way they were, I just put the ones that were on the front to the rear and drove them for 6 months before I got fed up with polishing and trying to keep them clean in this New England weather.
Any questions let me know!!
$700 for all 4 plus shipping or best offer (last I saw they were around $350 a wheel X 4 = 1400 so its half the cost of new). I have the boxes I got my new wheels shipped in so shipping won't be that tough if your not local.
Shipping would be from Medford, MA 02155
Trades for parts such as cam, heads, N20 dry kits, clutch kits or other camaro parts will be considered!
Questions? ls1thunder@comcast.net
Mike
Here is a pic of the wheels on the car in need of a polishing:
Quick polish on 1
Quick polish on a 2nd wheel
UPDATE: BOUGHT A TRUCK TODAY, NEED TO GET THESE OUT OF THE GARAGE!!!! MAKE ME AN OFFER, READY TO SHIP!!!
Looking to sell my Boyds, just couldn't keep up with the polishing on my daily driver. These are not perfect, they have 2 years of street duty on them and need polishing, and have some curbing. The ones I had on the front hit a bad pothole and had a small dent on the back of the rim from the impact to the tire. The tires didnt go flat, but i could feel the out of round feeling, I was on vacation and took a hammer to them to get them back to round and the vibration went away. I drove the car like that for another 6 months before it got put away for winter and I put these in my garage. I took them out this year when I bought new wheels and took the tires off. Took this pic after I quickly polished two of them just before I took the tires off.
Like I said these are not perfect, I am honest and would not mislead members of this forum. The rears never had a problem and just need a polish, it was just the fronts that were affected by the pothole.
Again if you are picky these wont work for you unless you are going to make them perfect, not that tough on an aluminum wheel but none the less they arent perfect.
I ran them the way they were, I just put the ones that were on the front to the rear and drove them for 6 months before I got fed up with polishing and trying to keep them clean in this New England weather.
Any questions let me know!!
$700 for all 4 plus shipping or best offer (last I saw they were around $350 a wheel X 4 = 1400 so its half the cost of new). I have the boxes I got my new wheels shipped in so shipping won't be that tough if your not local.
Shipping would be from Medford, MA 02155
Trades for parts such as cam, heads, N20 dry kits, clutch kits or other camaro parts will be considered!
Questions? ls1thunder@comcast.net
Mike
Here is a pic of the wheels on the car in need of a polishing:
Quick polish on 1
Quick polish on a 2nd wheel
UPDATE: BOUGHT A TRUCK TODAY, NEED TO GET THESE OUT OF THE GARAGE!!!! MAKE ME AN OFFER, READY TO SHIP!!!
Last edited by LastYearZ28; 07-27-2006 at 09:04 PM.
06-13-2006, 11:42 AM
#3
On The Tree
Thread Starter
Join Date: Jun 2004
Location: Boston, MA
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by barracuda_440
so they are 18s....but what how wide? what size tires did you have on them?
06-13-2006, 08:41 PM
#7
TECH Enthusiast
iTrader: (16)
Join Date: May 2005
Location: Gardner, KS
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
I have a full NX Wet Kit w/ lighted purge, window switch, pill set, 15lb bottle, premium NX Solenoids, and low fuel pressure cut off switch. paid $1500. I just ordered a new sticker for the bottle and had it re painted.
Trending Topics
06-26-2006, 02:41 PM
#11
On The Tree
Thread Starter
Join Date: Jun 2004
Location: Boston, MA
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
WHEELS ONLY!! I do have 2 of the tires left with plenty of tread, but the bozo who took them off took some of the rubber off the bead so they are "Unsafe" to mount....they are yours if you want them with the wheels.
07-11-2006, 09:49 AM
#15
Hope you find someone to buy these rims. I had mine for almost a month and love the look of them. Decided to sell mine to do heads and cam so I've got Boyd smoothie II's for sale. !8X10's and 18X8's with tires, under 700miles on them. Pm me for info.
07-20-2006, 08:31 PM
#20
On The Tree
Thread Starter
Join Date: Jun 2004
Location: Boston, MA
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1984camaroz28
Tires onthem?
They are waiting for a new home!!!