FS: Katech solid tensioner, Taylor 10.2 mm wires, 1998 fully ported heads
06-14-2006 | 11:35 PM
#1
FS: Katech solid tensioner, Taylor 10.2 mm wires, 1998 fully ported heads I am selling this stuff because I have gone with a different set up.
Red Solid Tensioner from thunder racing = SOLD
10.2mm red Taylor wires = SOLD
1998 Fully Ported Heads. I have the flow numbers for these, but at .600 they were flowing 319 cfm. They made over 500 rwhp on my old set up. They have 2.055 intake valves and 1.6 exhaust valves. There is over $3000 dollars worth of work in these heads. They were done and assembled by West King a NHRA head porter. They are fully assembled and ready to bolt on. $1100 o.b.o
Red Solid Tensioner from thunder racing = SOLD
10.2mm red Taylor wires = SOLD
1998 Fully Ported Heads. I have the flow numbers for these, but at .600 they were flowing 319 cfm. They made over 500 rwhp on my old set up. They have 2.055 intake valves and 1.6 exhaust valves. There is over $3000 dollars worth of work in these heads. They were done and assembled by West King a NHRA head porter. They are fully assembled and ready to bolt on. $1100 o.b.o
Last edited by 1fstGM; 07-20-2006 at 07:32 PM.
06-15-2006 | 01:39 AM
#4
Teching In
Joined: Jun 2006
Posts: 10
Likes: 0
wires and tensioner i am also interested in the tensioner if it will fit my ls2.i'll look at my ls2 and see if you don't know.i'm not sure if they are the same but if so and the wires are stock length i'm interested in both.
06-15-2006 | 10:53 PM
#7
The wires are replacements for the stock length. I am not sure if the tensioner will fit a LS2 though, but I am leaning towards it will. The teansioner is in perfect shape and has no scratches. If some one doesn't get it I will post pictures. I also replied to all PM's. Thanks!
Trending Topics
06-24-2006 | 07:06 PM
#13
