I have some LS1 race stuff for sale. All of these parts will come available as of this sunday.

I have changed motor plans and I no longer need these items. All of these items have never been ran by me, just left in the box on the shelf.


I will have pictures up tonight of all parts. Just gotta get the boxes out and take some pictures.


If anyone is interested in the heads and rocker arms/and valve covers together, please PM me and we can work out a combo deal


--- BRAND NEW COLA Light weight Pro-Series LS1 crank, 4.0" stroke

SOLD


Crank Pictures



-- Modern Cylinder Heads 6.0 (317 Castings)

- CNC ported, hand finished, epoxy work near pushrod for better flow
- Flow 317cfm (intake) @ .650 lift and carried it out, and
237 cfm (exhaust) at .650 lift and kept climbing higher
- Del West Titanium 2.08 intake valves
- Inconel 1.60 exhaust valves
- Titanium retainers, with special locks for the titanium intake valves
- Welded and reshaped combustion chamber for better flow
- 61-62 cc Combustion chambers
- Valve springs are Comp doubles, but they have 300 lbs + on the seat, and 600 lbs + open

- Will include the spacers to be used with Jesel Shaft rockers
- These are a $3500 set of heads by the way

I have the flow sheet that can be emailed if interested.

SOLD


Pic 2
Pic 3
Pic 4
Pic 5
Pic 6
Pic 7
Pic 8
Pic 9




-- Jesel J2K Mohawk Shaft rocker arms
- 1.7 ratio
- Upgraded fulcrum bearings
- Comes with all bolts and adjusters to be bolted on.
- This is an $1800 rockeram with the options they have

SOLD


Pic 2
Pic 3
Pic 4




--- Used LS1 HEADERS 98-02 GM Dynatech 1 3/4" stepped to 1 7/8"---
- Headers are coated and come with the removable 3" collector

SOLD

Pic 2
Pic 3
Pic 4
Pic 5



--- Accel Gen 7 DFI LS1 System --

- This system was used for startup only, never even left the garage
- Comes with the Accel Wide band option with sensor ( $1200 option)
- All LS1 wiring harness, coil packs harness, injector harness, etc etc
- This system is basically new still in the box
- This is a $2800 + system with the wideband option

SOLD






--- BRAND NEW Nasty Performance sheet metal LS1 valve covers----
- 2" high design
- comes with a -10 fitting on each cover
- Also has a billet fill cap installed
- These covers are polished also.
- Pictures will be coming
- New these would cost $440

SOLD



---- BRAND NEW 5 Gallon JAZ vertical fuel cell with brackets----

SOLD



I accept paypal or cashiers check. If paying with paypal BUYER will pay for the 3% CHARGES

 

Interested in the headers. I'd like to see the pics though.

 

Interested in seeing a flow sheet on the heads.
Thanks,
J.R. Thomas
jthomas@smrtexas.com

 

Not a problem, I will have all the pictures up tonight after work.

DO you have an email address you would like the pictures sent to?

 

Sent you a pm

 

Send me pics of the Gen 7 setup..

mhutto01@gmail.com

im interested in that...WHere are you located? I believe that setup will control low impedence injector correct?

 

I am in central Illinois. As for controlling injectors, yes it will control low or high impedence injectors.

I will email pictures tonight along with posting them up on here too.

 

Pics of headers to (incrediblecar_guy@yahoo.com) Thanks!

 

EMail sent with the flow sheet. I scanned it upside down so you will have to rotate it to see it right .

 

Works for me bro!

 

All people who asked for pictures should have them in their email INBOX.

Main post will be updated shortly with one picture for each item, and then links to more pictures.

 

send me pics of the gen 7 and the rocker arms please mbrunkerjr9@bellsouth.net

 

Pictures sent, also links above too.

 

the gen 7 looks brand new in the pics. too bad I can't swing it right now. maybe in a few days

 

PM sent

 

As of right now, the Gen 7 is sold pending payment.

PM's responded to

 

Valve covers and the fuel cell are sold.

 

are the headers sold yet let me know

 

Thanks!!!

 

No they aren't. First come first serve on this stuff. Did you want the shaft rockers?