Parts FS (Sub box, mufflers, pushrods, TB, O2 sims, etc) SoCal 91107
10-30-2006, 12:10 AM
#1
Teching In
Thread Starter
iTrader: (8)
Join Date: May 2004
Location: Simi Valley, CA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Parts FS (JL custom-fit sub box, mufflers, pushrods) SoCal 91107 For sale...everything is OBO. I live in Pasadena, CA, and work in Woodland Hills. I can arrange for delivery in the L.A. area, but pickup is preferred either at my work or at my home.
Sub box with 2 JL 10" subs (I believe these are 10W0x subs). Fits over the well in the back. See pics. Pickup or delivery in the L.A. area only. SOLD
Sony XM-DS1300P5 monaural amplifier. 200W x 1 into 4 ohms. SOLD
Comp Cams 7.300" Pushrods. $60 shipped.
14 Morel hydraulic lifters in good shape. 1 with a nick in the body (usable?) and another that needs a replacement roller tip. Less than 10k miles. $80 shipped.
2 Magnaflow 11259 mufflers (3" center/offset). Brand new in box. SOLD
Ported and polished C5 TB. Missing one of the throttle plate screws. SOLD.
2 O2 simulators. SOLD
I accept PayPal.
Edit: New pictures
Sub box with 2 JL 10" subs (I believe these are 10W0x subs). Fits over the well in the back. See pics. Pickup or delivery in the L.A. area only. SOLD
Sony XM-DS1300P5 monaural amplifier. 200W x 1 into 4 ohms. SOLD
Comp Cams 7.300" Pushrods. $60 shipped.
14 Morel hydraulic lifters in good shape. 1 with a nick in the body (usable?) and another that needs a replacement roller tip. Less than 10k miles. $80 shipped.
2 Magnaflow 11259 mufflers (3" center/offset). Brand new in box. SOLD
Ported and polished C5 TB. Missing one of the throttle plate screws. SOLD.
2 O2 simulators. SOLD
I accept PayPal.
Edit: New pictures
Last edited by Jon F; 11-04-2006 at 01:10 AM.
Trending Topics
10-31-2006, 11:52 AM
#10
Teching In
Thread Starter
iTrader: (8)
Join Date: May 2004
Location: Simi Valley, CA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Other members have informed me that you can't buy them individually. The other lifter is on my bench, sorry for the confusion.
One lifter was sideways in the bore and was worn down by the camshaft spinning , which rounded down the roller. The other one was scored by a metal shaving. I'm not sure if this damage was due to improper initial installation or a broken lifter tray as I bought the car in this condition knowing that I would have to repair the valvetrain. It never hurts to replace the trays, though, and they're really cheap.
One lifter was sideways in the bore and was worn down by the camshaft spinning , which rounded down the roller. The other one was scored by a metal shaving. I'm not sure if this damage was due to improper initial installation or a broken lifter tray as I bought the car in this condition knowing that I would have to repair the valvetrain. It never hurts to replace the trays, though, and they're really cheap.
Last edited by Jon F; 10-31-2006 at 12:29 PM.
10-31-2006, 12:18 PM
#12
Teching In
Thread Starter
iTrader: (8)
Join Date: May 2004
Location: Simi Valley, CA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
I still have the subs and box. Shipping would be around $130 via UPS, and I would have to buy a box and packing material to put it in, so figure $250 total.
10-31-2006, 01:56 PM
#13
Launching!
iTrader: (2)
Join Date: Jul 2006
Location: alabama
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Do u still have the magnaflows. To help on shipping I can give you my business address is wanted. How loud do you think they will be on a 02 2500hd 6.0L just replaceing the factory muffler with these and no duals?
10-31-2006, 03:07 PM
#14
Teching In
Thread Starter
iTrader: (8)
Join Date: May 2004
Location: Simi Valley, CA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 01WS6er
Do u still have the magnaflows. To help on shipping I can give you my business address is wanted. How loud do you think they will be on a 02 2500hd 6.0L just replaceing the factory muffler with these and no duals?
11-02-2006, 12:16 AM
#17
Teching In
Thread Starter
iTrader: (8)
Join Date: May 2004
Location: Simi Valley, CA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
New pictures in the top post!
Here's a picture of the other two lifters. On one, the roller is rounded off, and part of the body is worn away at the tip. The other one has a nick in the body and may be usable.
The stereo stuff, the lifters, and the pushrods are still available.
Here's a picture of the other two lifters. On one, the roller is rounded off, and part of the body is worn away at the tip. The other one has a nick in the body and may be usable.
The stereo stuff, the lifters, and the pushrods are still available.
11-03-2006, 11:54 AM
#18
Teching In
Thread Starter
iTrader: (8)
Join Date: May 2004
Location: Simi Valley, CA
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
7.3 pushrods still available. I'm trying to contact Morel about the lifters to see if the roller tip can be serviced.
Last edited by Jon F; 11-04-2006 at 01:10 AM.
