A Good Bunch of Parts For Sale...
12-07-2006 | 01:09 PM
#1
Thread Starter
On The Tree
iTrader: (7)
Joined: Dec 2001
Posts: 125
Likes: 0
From: Tulsa, OK again...
A Good Bunch of Parts For Sale... Hey guys, what's up? I hope everyone's been doing good? Well, I moved back here after a year of working on a project in NY. So, now that things are kind of setteled here, I'd like to sell some of the stuff I have left over from my old toys. Thanks.
3-inch off-Road Y-pipe, setup with dump (needs cap, or electric cutout) and mid pipe installed. Needs some clamps. $60.00 LOCAL PICK UP OR CAN POSSIBLY MEET.
Red Moroso Utra 40 Spark Plug wires for use when you relocate your coils under the cowl, but above the valve covers. These are the ones sold by Jay Fisher Pontiac (where I used to work) for $175 or so (the Ultra 40s are expensive in themselves). These were on my SS for a little while: $60.00
SLP jounce spacer kit. This is a new package of the 3/4-inch blocks and longer bolts that were installed in the rear of all 17-inch wheel/tire cars from the factory and SLP. These limited the amount of ultimate travel the differential had to make sure the larger wheels and tires wouldn't make contact with the body. SLP sold the kits over the counter, as they should be installed on any car running 17s or bigger wheels: $12.50
2-Gray factory rear floor mats: $10.00
Misc LS1 emissions/air pump and PCV items availible, including an EGR set up: inquire
16-LS1 factory rockers, bolts and rocker perches: $30.00
Motorcycle swingarm stand: $30.00
Motorcycle cable with Kryptonite locks: $25.00
Motorcycle front dics lock: $20.00
Pics as requested.
That's it for now, but I can possibly have more later.
Thanks
Abe
3-inch off-Road Y-pipe, setup with dump (needs cap, or electric cutout) and mid pipe installed. Needs some clamps. $60.00 LOCAL PICK UP OR CAN POSSIBLY MEET.
Red Moroso Utra 40 Spark Plug wires for use when you relocate your coils under the cowl, but above the valve covers. These are the ones sold by Jay Fisher Pontiac (where I used to work) for $175 or so (the Ultra 40s are expensive in themselves). These were on my SS for a little while: $60.00
SLP jounce spacer kit. This is a new package of the 3/4-inch blocks and longer bolts that were installed in the rear of all 17-inch wheel/tire cars from the factory and SLP. These limited the amount of ultimate travel the differential had to make sure the larger wheels and tires wouldn't make contact with the body. SLP sold the kits over the counter, as they should be installed on any car running 17s or bigger wheels: $12.50
2-Gray factory rear floor mats: $10.00
Misc LS1 emissions/air pump and PCV items availible, including an EGR set up: inquire
16-LS1 factory rockers, bolts and rocker perches: $30.00
Motorcycle swingarm stand: $30.00
Motorcycle cable with Kryptonite locks: $25.00
Motorcycle front dics lock: $20.00
Pics as requested.
That's it for now, but I can possibly have more later.
Thanks
Abe
Last edited by NYNJRacer; 01-25-2007 at 08:21 PM.
12-07-2006 | 01:28 PM
#2
I'm actually intersted in the coil packs and harness, could you shoot me a picture to jeffrswope@gmail.com thanks!
Trending Topics
12-07-2006 | 08:41 PM
#17
intrested in B&B stainless cat-back with quad tips can u send me a pic tsench@hotmail.com can u also giv me a pic close up to the tip thanks
12-07-2006 | 08:53 PM
#19
Thread Starter
On The Tree
iTrader: (7)
Joined: Dec 2001
Posts: 125
Likes: 0
From: Tulsa, OK again...
Originally Posted by tsench
intrested in B&B stainless cat-back with quad tips can u send me a pic tsench@hotmail.com can u also giv me a pic close up to the tip thanks
