Textrilia OZ700 SB
03-03-2007 | 12:15 PM
#1
Textrilia OZ700 SB SOLD I have a Textrilia 0Z700 Steel billet single with slave cylinder and all. I am looking to sell it with 3000 miles on it. No problems with slipping or any other problem. I talked to Textrilia and they told me It would eventually if I keep racing with this clutch. So Textrilia is making me a Triple disc for it. If you can meet me you can feel the pedal feel. I am looking for 600 for all of it. I paid 1167.00 for it. I will have new clutch in about 3 weeks. That's when I would switch it out. You can ask anyone Textrilia is the best, they have the best customer service any where. Thanks for the interest.
Last edited by 02SSLE; 03-14-2007 at 07:44 PM.
03-04-2007 | 02:37 PM
#6
TECH Fanatic
iTrader: (1)
Joined: Oct 2002
Posts: 1,851
Likes: 0
From: Elmhurst, IL (Chicago Suburb)
GUYS, this is arguably the best single disc clutch on the market which holds huge power up to 650rwhp, while still retaining the stock feel of your stock clutch. I just bought a brand new one on a GP from East Coast Superchargering, who has been using this clutch with KILLER RESULTS the last 1.5 years or so! 
Trending Topics
03-05-2007 | 09:57 PM
#10
How many passes do you have on this clutch? And on which tires? I'm not worried about the 3000 miles it's those hard launches that concern me. Considering the power you are putting to the ground. 
03-05-2007 | 10:53 PM
#11
He only has a couple launches and they were anything but hard. The last run I saw he cut a 1.87 60'....the rest were in the 2.X's. He'll chime in and let you know exact details, but he's selling now before he damages it.
Last edited by 99Hawk262; 03-05-2007 at 11:13 PM.
03-05-2007 | 11:04 PM
#12
my car doesn't leave hard doesn't build boost out of hole. Peter at Textrilia said they hold power at my level without issue unless you drag race with sticky tires. Then it can become an issue but I have no issue with clutch at this time.
03-06-2007 | 01:23 AM
#14
I put 4K miles and about 15 passes on my oz700 so far. And I just had it out to fix the slave. The clutch disc measured out to .260" and the new thickness is .300". So I used .040" in 4K miles. Not bad!
Times below are with the oz700.
Times below are with the oz700.