Paxton Blower setup (for TBI or carb) or maybe LT1? plus other stuff
05-27-2007, 07:24 PM
#1
On The Tree
Thread Starter
Join Date: Apr 2007
Location: Seminole, OK
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Paxton Blower setup (for TBI or carb) or maybe LT1? plus other stuff I have a Paxton SN93 Kit for sale. I bought the Kit minus head unit then bought a head unit that was supposedly never used. The blower did not spin freely so I went and had it checked and the guy said it has just never had oil in it. So maybe it is brand new. It is polished and comes with a stainless bracket that also mounts the PS (you could just cut that part off if not needed).The kit also has the Crank Pulley, Belt, multiple tensioners, Remote oil cooler and pump for blower, Throttle Body plate with 2 injectors (for feeding more fuel as boost comes up), MAP sensor, Paxton fuel computer, Polished carb bonnet, piping, etc. The only known problems is the Blower pulley is an 8 rib and the other pulleys are 6. You might be able to run it but if not a pulley is like 30 bucks on Ebay. $750.00 OBO
Also have a 383 SBC rotating assembly for sale. Eagle 2 piece 3.750 350 main Crank, Scat 7/16 Cap Screw 4340 I beams, Trick Flow(Arias)Forged Dished pistons (1.120 CR height) 4.030 bore, Fluidampr, Scat SFI flywheel, and a few other misc parts $800.00 pistons and fluidampr are used, rest is new
in box. Buy a seal adapter and put in an LT1.
Complete TPI setup, Intake w/injectors, Distributor, Wiring harness, computer, etc. $350.00
Paxton Novi 2000 Head Unit only used but very little, Was sent in to check when I got it. Everything is good, $850.00 Large Blower might be a tight fit for an Fbody.
89 S10 truck, has non running 2.8 V6 w/700r4 . Runs but has wiring issues. Would make great V8 candidate and SBC headers come with it. Has Polished 18s, clear tails, new certifit front clip, chrome grill, Cowl induction hood, roll pan, grant wheel, drop springs and spindles, Newer paint but not a good job, Lots of potential, Clear OK title with Black Tag (good until 2/08), Interior needs work (missing dash and carpet, also all AC components are gone). $2000.00 OBO
Will make a good package deal to someone for the truck, 383 kit, sn93 kit and TPI and will throw in tons of stuff to build. A blown TPI 383 s10 should run good.
I will put pics up tonight. Feel free to send offers, just be reasonable. All parts located in Seminole, OK 74868. Will ship or drive to meet up possibly. thanks
Also have a 383 SBC rotating assembly for sale. Eagle 2 piece 3.750 350 main Crank, Scat 7/16 Cap Screw 4340 I beams, Trick Flow(Arias)Forged Dished pistons (1.120 CR height) 4.030 bore, Fluidampr, Scat SFI flywheel, and a few other misc parts $800.00 pistons and fluidampr are used, rest is new
in box. Buy a seal adapter and put in an LT1.
Complete TPI setup, Intake w/injectors, Distributor, Wiring harness, computer, etc. $350.00
Paxton Novi 2000 Head Unit only used but very little, Was sent in to check when I got it. Everything is good, $850.00 Large Blower might be a tight fit for an Fbody.
89 S10 truck, has non running 2.8 V6 w/700r4 . Runs but has wiring issues. Would make great V8 candidate and SBC headers come with it. Has Polished 18s, clear tails, new certifit front clip, chrome grill, Cowl induction hood, roll pan, grant wheel, drop springs and spindles, Newer paint but not a good job, Lots of potential, Clear OK title with Black Tag (good until 2/08), Interior needs work (missing dash and carpet, also all AC components are gone). $2000.00 OBO
Will make a good package deal to someone for the truck, 383 kit, sn93 kit and TPI and will throw in tons of stuff to build. A blown TPI 383 s10 should run good.
I will put pics up tonight. Feel free to send offers, just be reasonable. All parts located in Seminole, OK 74868. Will ship or drive to meet up possibly. thanks
05-30-2007, 10:16 AM
#4
On The Tree
Thread Starter
Join Date: Apr 2007
Location: Seminole, OK
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Working on pics. Will be up tonight. Some stuff I would trade for:
For a 93 TA LT1
Bolt in roll bar (or maybe weld in)
Racetronix fuel pump kit
cc306 or gm847
comp lifters
titanium retainers
stainless 1.6 rockers SA or NSA dont matter
moser axles stock width
AFPR
Fiberglass hood (any style)
Probably think of more later but here is a start
I will trade or buy outright. Thanks
For a 93 TA LT1
Bolt in roll bar (or maybe weld in)
Racetronix fuel pump kit
cc306 or gm847
comp lifters
titanium retainers
stainless 1.6 rockers SA or NSA dont matter
moser axles stock width
AFPR
Fiberglass hood (any style)
Probably think of more later but here is a start
I will trade or buy outright. Thanks
05-30-2007, 11:31 PM
#6
On The Tree
Thread Starter
Join Date: Apr 2007
Location: Seminole, OK
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
SN93 Kit
Comes with an elbow and some other tubing, misc installation hardware. Nearly complete kit for TBI or Carb, but could probably adapt over to a LT1.
Comes with an elbow and some other tubing, misc installation hardware. Nearly complete kit for TBI or Carb, but could probably adapt over to a LT1.
05-30-2007, 11:34 PM
#7
On The Tree
Thread Starter
Join Date: Apr 2007
Location: Seminole, OK
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
383 Kit
Eagle 3.750 crank 2 piece seal, Scat 6.000 7/16 Capscrew 4340 I beam rods, Scat SFI flexplate, Trick Flow 4.030 1.120CH Forged Pistons made by Arias (used), and Fluidampr (used). Rest is new in boxes only taken out for pics. Needs to be balanced to be good to 550HP+
Eagle 3.750 crank 2 piece seal, Scat 6.000 7/16 Capscrew 4340 I beam rods, Scat SFI flexplate, Trick Flow 4.030 1.120CH Forged Pistons made by Arias (used), and Fluidampr (used). Rest is new in boxes only taken out for pics. Needs to be balanced to be good to 550HP+
