Moates, Ls2 Block, Pistons, Tons Of Parts, To Much To List, L@@@@@k
06-18-2007, 10:19 PM
#1
10 Second Club
Thread Starter
iTrader: (126)
Join Date: Sep 2004
Location: TAMPA
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
Moates, Ls2 Block, Pistons, Tons Of Parts, To Much To List, L@@@@@k I have a Brand New in the Box Roadrunner Realtime Emulation PCM for 99-02 LS1 F-Body and Y-Body. Bought it in October for my road race car but I never ended up even taking it out of the box. Sold the car, so I don't need this anymore. Also have an EFI Live Realtime License. This package cost me $815.35 shipped.
I'll Take $700 shipped for everthing. SOLD
I have a Brand New LS2 block that was never used. It has some scuffs on the front and back from being moved around the shop but nothing major that would be seen or hinder it from sealing against a gasket (ex. front and rear covers). New they are $1000 plus shipping.
I'll take $600 plus shipping. SOLD
Lunati Forged Pistons Part #LS17H12SD Brand New in the Box.
LS–1 –2cc Flat Top Piston 1.312" Compression Height 3.903" Bore. 3.622" Stroke X 6.125" Rod Length. 1.5mm–1.5mm–3mm Ring Grooves. 4032 Alloy. 10.6:1 with 67cc Head. Comes with pins. Cost $682.99 in Jegs.
$550 shipped PRICE REDUCED $500 SHIPPED
I have a pair of 1998 stock perimeter bolt heads complete with springs and valves. They are stock and have nothing wrong with them.
$100 shipped obo in the US. PRICE REDUCED $85 SHIPPED
Stock 98 F-Body computer out of a 6 speed Trans am. $ 75 shipped PRICE REDUCED $65 SHIPPED
Magic Stick Like Cam
I have a very low mileage (less then 1000 miles) Cam that is very similar to the Magic Stick 3 cam. Here are the specs.
236 242 602 610 lift with 114 lobe sep.
Here are the Magic Stick specs:
237/242 603/609 MAGIC STICK 55+RWHP 2300-6800 RPM
Has a little surface rust but will clean up. Sorry but no cam card.
$200 obo SHIPPED SOLD
LS1 HOT CAM
This is a Brand New regrind. This is when they take a larger cam and grind it down to the current specs. This is ground off of a original GM cam.
219/228 @ .050 with .525/.525 with stock 1.7 rockers
$200 obo shipped PRICE REDUCED $175 SHIPPED
Crane Solid Roller
276/286 @ .050 with .714/.714 with a 1.7 rocker
VERY LITTLE USE $160 obo SHIPPED SOLD
Stock LS1 8 intake and 8 exhaust low miles $40 obo shipped SOLD
Brand New Trick Flow hardened pushrods were never run just placed in motor on engine stand to check length. 7.25 x .80 thick $75 obo shipped PRICE REDUCED $60 SHIPPED
8 GM wires for 98 Ls1 $30 obo shipped PRICE REDUCED $25 SHIPPED
8 Accel wires for 98 LS1 $30 obo shipped PRICE REDUCED$25 SHIPPED
PM me your email address for pics.
I'll Take $700 shipped for everthing. SOLD
I have a Brand New LS2 block that was never used. It has some scuffs on the front and back from being moved around the shop but nothing major that would be seen or hinder it from sealing against a gasket (ex. front and rear covers). New they are $1000 plus shipping.
I'll take $600 plus shipping. SOLD
Lunati Forged Pistons Part #LS17H12SD Brand New in the Box.
LS–1 –2cc Flat Top Piston 1.312" Compression Height 3.903" Bore. 3.622" Stroke X 6.125" Rod Length. 1.5mm–1.5mm–3mm Ring Grooves. 4032 Alloy. 10.6:1 with 67cc Head. Comes with pins. Cost $682.99 in Jegs.
$550 shipped PRICE REDUCED $500 SHIPPED
I have a pair of 1998 stock perimeter bolt heads complete with springs and valves. They are stock and have nothing wrong with them.
$100 shipped obo in the US. PRICE REDUCED $85 SHIPPED
Stock 98 F-Body computer out of a 6 speed Trans am. $ 75 shipped PRICE REDUCED $65 SHIPPED
Magic Stick Like Cam
I have a very low mileage (less then 1000 miles) Cam that is very similar to the Magic Stick 3 cam. Here are the specs.
236 242 602 610 lift with 114 lobe sep.
Here are the Magic Stick specs:
237/242 603/609 MAGIC STICK 55+RWHP 2300-6800 RPM
Has a little surface rust but will clean up. Sorry but no cam card.
$200 obo SHIPPED SOLD
LS1 HOT CAM
This is a Brand New regrind. This is when they take a larger cam and grind it down to the current specs. This is ground off of a original GM cam.
219/228 @ .050 with .525/.525 with stock 1.7 rockers
$200 obo shipped PRICE REDUCED $175 SHIPPED
Crane Solid Roller
276/286 @ .050 with .714/.714 with a 1.7 rocker
VERY LITTLE USE $160 obo SHIPPED SOLD
Stock LS1 8 intake and 8 exhaust low miles $40 obo shipped SOLD
Brand New Trick Flow hardened pushrods were never run just placed in motor on engine stand to check length. 7.25 x .80 thick $75 obo shipped PRICE REDUCED $60 SHIPPED
8 GM wires for 98 Ls1 $30 obo shipped PRICE REDUCED $25 SHIPPED
8 Accel wires for 98 LS1 $30 obo shipped PRICE REDUCED$25 SHIPPED
PM me your email address for pics.
Last edited by GONEB4U; 06-27-2007 at 07:31 PM.
06-19-2007, 09:31 PM
#3
10 Second Club
Thread Starter
iTrader: (126)
Join Date: Sep 2004
Location: TAMPA
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
Shipping will be from 06482. Shipping arrangements must be made by the buyer for the LS2 block. I will strap to a pallet and shrink wrap it. The rest is the buyers responsibility.
06-19-2007, 10:43 PM
#5
TECH Apprentice
iTrader: (59)
Join Date: Jul 2004
Location: NJ
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
ls2 Interested in the block,pics? cyclerage23@yahoo.com
Does it have cam bearings installed?
How much shipped to NJ 08879?
Does it have cam bearings installed?
How much shipped to NJ 08879?
06-20-2007, 10:10 PM
#7
10 Second Club
Thread Starter
iTrader: (126)
Join Date: Sep 2004
Location: TAMPA
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
Yes I take Paypal. I can take the block on a pallet to Brideport Ct to a shipper of your choice. But the buyer has to make all arrangements. I will take pics of the block tomorrow and send them out to everyone.
Trending Topics
06-21-2007, 07:36 PM
#9
10 Second Club
Thread Starter
iTrader: (126)
Join Date: Sep 2004
Location: TAMPA
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
UPDATE Everyone that PM'ed me their email address is going to have to wait till Saturday for pics. My wife extended her trip and is not going to be back till Saturday with my camera. 
Sorry.
Sorry. 
06-23-2007, 08:44 PM
#11
10 Second Club
Thread Starter
iTrader: (126)
Join Date: Sep 2004
Location: TAMPA
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
I'm waiting for one of our sponsers who was the first one to contact me about the block. If he does not take the block the I will email pics to everyone on my list and then it is first come first serve.
06-23-2007, 09:23 PM
#13
10 Second Club
Thread Starter
iTrader: (126)
Join Date: Sep 2004
Location: TAMPA
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
Actually one of the sponsers here has first dibs on the ls2 block and the ms3 like cam. If he backs out then the you can consider the cam yours 2KSS. I'll give him till tomorrow night.
*****UPDATE***** I just got a call from my buddy and we decided to build my GN that I have for sale in my sig. We are not sure if we are going LS1 powered or conventional sbc. If we decide on LS1 powered then the MS3 like cam is no longer for sale. I will make up my mind by Monday. So for now the cam is off the table.
*****UPDATE***** I just got a call from my buddy and we decided to build my GN that I have for sale in my sig. We are not sure if we are going LS1 powered or conventional sbc. If we decide on LS1 powered then the MS3 like cam is no longer for sale. I will make up my mind by Monday. So for now the cam is off the table.
Last edited by GONEB4U; 06-23-2007 at 09:40 PM.
