misc fbody and Olds parts, th350

 
Thread Tools
 
Search this Thread
 
Old 07-28-2007 | 07:48 PM
  #1  
Pyro97's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: May 2005
Posts: 202
Likes: 0
From: Aiken, SC
Default misc fbody and Olds parts, th350

Trying to clean up and make some room. All these parts have been stored indoors since I have had them. I did some research to come up with these prices but if you feel they are not appropriate, offers will be considered since I need to get rid of this stuff. Pics upon request and prices do not include shipping. I can figure out shipping costs if interested.
Located in Aiken, SC

th350 transmission out of 1971 Olds. worked fine when removed and has been sitting in my basement for a couple years. includes torque converter. will not ship -- $150

Accel 30lb fuel injectors for LT1, used --$100

94-03 S10 altezza taillights like these but with chrome housing http://www.sporttruckdirect.com/Pics...9-2036_Big.jpg $20

Driver side A-pillar trim from 01 TA, ebony. --$15

Steering wheel from 97 firebird, gray, has radio controls but they stick and the paint is peeling. Airbag was blown but that shouldn't affect the steering wheel -- $15

Steering column from 01 TA 6spd, complete but no key, includes knuckle/shaft, small crack in plastic -- $50

Pass. side firebird door handle bezel, black --$20

93-96 Camaro 6spd shift plate w/ashtray lid, boot has small tear --$35

ABS module from 97 Z28 6spd that I think had traction control --$15

LT1 steel driveshaft --$25

Stock LCA's from 97 firebird --$20

X-brace from 97 firebird convertible --$20

1 stock Z28 exhaust tip --$15

Axles with long studs out of a LS1 car 10bolt --$25 for both

93-02 camaro seat belt guides, gray --$10

Seat trim piece that covers the reclining mechanism, driver and pass. sides, color is graphite, not cracked but some wear --$5 each

LS1 stock K-member, will not ship --$35

Windsheild washer fluid reservoir, no cap --$10?

LS1 power steering cooler $10

Integrated body control module from 01 TA 6spd --$10

brake line heat shield from LS1 TA --$free

Front sway bar from 01 TA --$20

Rear brake rotors from LS1 car --$25

Rear brake rotors from LT1 car --$15

Upper/Lower stock A-arms from 01 TA --$10 each

Stock 10bolt rearend cover --$free

OBDII PCM from 97 LT1/auto with 2.73 gears --$40

93-02 Firebird stock rear side markers --$10

93-97 Camaro stock amber turn signal lenses --$15


The following are from a 1979 Olds Custom Cruiser wagon with a 350 motor

AC system: condensor, compressor, evaporator and most lines/hoses. I can't gaurantee that they work as the car they were in sat for a while and they have been sitting in my basement since removed. --$20

Fan --$10

Power steering up w/brackets. The pump has a sticker indicating that it is a remanufactured part. Also can't promise this part will be in good working condition since it came from the same car as the AC --$20

Charcoal canister --$10

windshield wiper motor --$20

I also have a couple other accessory brackets, one of which I think is for the alternator so if you need one send me a picture or describe the bracket you are looking for and I'll see if I have it. Brackets will be $10 each.

Last edited by Pyro97; 08-05-2007 at 12:34 AM.
Old 07-30-2007 | 05:08 PM
  #2  
Pyro97's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: May 2005
Posts: 202
Likes: 0
From: Aiken, SC
Default

bump.
Old 08-01-2007 | 10:25 PM
  #3  
Pyro97's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: May 2005
Posts: 202
Likes: 0
From: Aiken, SC
Default

bump it up
make an offer, I need to make room
Old 08-02-2007 | 02:54 AM
  #4  
djlethalwang's Avatar
Teching In
 
Joined: Apr 2006
Posts: 10
Likes: 0
From: Amarillo, TX
Default

Do you have a picture of the shifter plate? Also... I'm not to familiar with the F-body interiors, but would this fit a 1998 Camaro center console? It seems like the LT1 and LS1 interiors are very similar, but I want to be sure...
Old 08-02-2007 | 08:48 AM
  #5  
Pyro97's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: May 2005
Posts: 202
Likes: 0
From: Aiken, SC
Default

I don't have a pic right now but I can get one, but the interiors were updated in 1997 with a different center console and dash so it won't work on a '98.
Old 08-02-2007 | 03:15 PM
  #6  
djlethalwang's Avatar
Teching In
 
Joined: Apr 2006
Posts: 10
Likes: 0
From: Amarillo, TX
Default

Oh alright... well nevermind. I've been trying to find one for a friend, but if it won't work then I guess I won't need a picture. Thanks for the info, though.
Old 08-02-2007 | 03:52 PM
  #7  
01 BERGER CAMARO SS's Avatar
TECH Enthusiast
iTrader: (77)
 
Joined: Feb 2004
Posts: 718
Likes: 0
From: 2 Miles from the Brder Wall, Tx
Default

does the power steering cooler come with hoses? Im interested either way
Old 08-02-2007 | 11:27 PM
  #8  
Pyro97's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: May 2005
Posts: 202
Likes: 0
From: Aiken, SC
Default

Originally Posted by 01 BERGER CAMARO SS
does the power steering cooler come with hoses? Im interested either way
it has the short 90* hose on one end but not the others.
Old 08-08-2007 | 10:13 AM
  #9  
Pyro97's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: May 2005
Posts: 202
Likes: 0
From: Aiken, SC
Default

ttt...
 




All times are GMT -5. The time now is 06:00 PM.