Strange 12 Bolt 4.88 FULL Spool
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: Utah
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This is a Chevelle 12 Bolt, that has all STRANGE stuff! The drum brakes are GM.
T/A Girdle
Strange Full Spool
35 spline axles
Strange 4.88 gear set
Strange 3" lug studs
I picked this up for my Camaro, but I am not going to be using it now, and need it gone!
It is fresh. It has not been ran since it was built by Strange.
I prefer a money order or cashiers check, cause there are no fees.
I will take Paypal, but you have to add 3%.
It is located in Salt Lake City, Utah. I can help with delivery as much as possible. I will help with shipping as well. I will get it on a crate AFTER it is paid for. The buyer can then arrange the shipping, and I will drop it of at the local terminal, or they can pick it up from our shop.
Asking $1450 OBO. REDUCED TO $1350 OBO
Feel free to make offers. As far as trades are considered, I am looking for a FULLY built TH350 or TH400 with a Trans brake. I also need a Stall converter for it.
Thanks guys!
PICTURES:![](https://i4.photobucket.com/albums/y127/Chevelle408/Ebay/DSC_0696.jpg)
![](https://i4.photobucket.com/albums/y127/Chevelle408/Ebay/DSC_0694.jpg)
![](https://i4.photobucket.com/albums/y127/Chevelle408/Ebay/DSC_0691.jpg)
T/A Girdle
Strange Full Spool
35 spline axles
Strange 4.88 gear set
Strange 3" lug studs
I picked this up for my Camaro, but I am not going to be using it now, and need it gone!
It is fresh. It has not been ran since it was built by Strange.
I prefer a money order or cashiers check, cause there are no fees.
I will take Paypal, but you have to add 3%.
It is located in Salt Lake City, Utah. I can help with delivery as much as possible. I will help with shipping as well. I will get it on a crate AFTER it is paid for. The buyer can then arrange the shipping, and I will drop it of at the local terminal, or they can pick it up from our shop.
Asking $1450 OBO. REDUCED TO $1350 OBO
Feel free to make offers. As far as trades are considered, I am looking for a FULLY built TH350 or TH400 with a Trans brake. I also need a Stall converter for it.
Thanks guys!
PICTURES:
![](https://i4.photobucket.com/albums/y127/Chevelle408/Ebay/DSC_0696.jpg)
![](https://i4.photobucket.com/albums/y127/Chevelle408/Ebay/DSC_0694.jpg)
![](https://i4.photobucket.com/albums/y127/Chevelle408/Ebay/DSC_0691.jpg)
![](https://i4.photobucket.com/albums/y127/Chevelle408/Ebay/DSC_0675.jpg)
Last edited by kc-unit; 11-09-2007 at 07:24 PM.
#4
Teching In
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: Utah
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yes it will. You will have to cut off your suspension mounting brackets, and weld them up to the 12 bolt. You will want to run everything adjustable though. You would want to run adjustable suspension no matter what rear end you have though.
Trending Topics
#8
Teching In
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: Utah
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Maybe someone who is into F-Bodies owns other cars as well? Doing a 4-link set up for their track car.
Come on man. There are a lot of reasons someone on an LS site would be interested in a VERY TOUGH rear end.
I am thinking maybe you need to get into a different hobby for even coming here with that lame *** statement. Sorry you need to have **** explained to you, and don't know anything about custom applications. When is the last time you have seen a Ford 9" in a 4th gen? All the time right? Well they are NOT made for LTx or LSx cars either. CUSTOM applications 4TW.
YOU FTL
Thanks for the bump though.
![GTFO](https://ls1tech.com/forums/images/smilies/gtfoslap.gif)
#9
10 Second Club
iTrader: (3)
Join Date: Mar 2005
Location: Rancho Cucamonga, CA
Posts: 596
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
wow, you just told a guy it would work in a 98 ss. what you didnt tell him is that he would have to change the whole back half of the car. i have no problem selling that to someone who has an application, but dont tell someone that it will work for his application when it wont. and yes i see 9 inch in 4th gen all the time, however the housing is designed for the 4th gen. it is not a custom setup. the housing is a direct bolt in.
as far as the rear for something like a unibody chevelle or nova, hell yah good deal, bump for that.
as far as the rear for something like a unibody chevelle or nova, hell yah good deal, bump for that.
#10
Teching In
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: Utah
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
wow, you just told a guy it would work in a 98 ss. what you didnt tell him is that he would have to change the whole back half of the car. i have no problem selling that to someone who has an application, but dont tell someone that it will work for his application when it wont. and yes i see 9 inch in 4th gen all the time, however the housing is designed for the 4th gen. it is not a custom setup. the housing is a direct bolt in.
as far as the rear for something like a unibody chevelle or nova, hell yah good deal, bump for that.
as far as the rear for something like a unibody chevelle or nova, hell yah good deal, bump for that.
Maybe you have trouble reading, or comprehending what you read. He asked if it will work in his car. I said yes, BUT YOU WILL HAVE TO CUT OFF YOUR REAR SUSPENSION AND WELD IT UP TO THE 12 BOLT AND RUN ADJUSTABLE REAR SUSPENSION.
![Punch](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_punch.gif)
#13
On The Tree
iTrader: (7)
Join Date: Aug 2007
Location: Dinwiddie, Va
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Wow. You proved my point. You have never seen a custom rear end put into a car it was not designed for? Ok, then leave this thread.
Maybe you have trouble reading, or comprehending what you read. He asked if it will work in his car. I said yes, BUT YOU WILL HAVE TO CUT OFF YOUR REAR SUSPENSION AND WELD IT UP TO THE 12 BOLT AND RUN ADJUSTABLE REAR SUSPENSION.
![Punch](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_punch.gif)
Maybe you have trouble reading, or comprehending what you read. He asked if it will work in his car. I said yes, BUT YOU WILL HAVE TO CUT OFF YOUR REAR SUSPENSION AND WELD IT UP TO THE 12 BOLT AND RUN ADJUSTABLE REAR SUSPENSION.
![Punch](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_punch.gif)
Yes it will. You will have to cut off your suspension mounting brackets, and weld them up to the 12 bolt. You will want to run everything adjustable though. You would want to run adjustable suspension no matter what rear end you have though.
__________________
__________________
#14
Teching In
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: Utah
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Fella, go try to scam someone else. its nice how to tried to rearrange what you said. what you actually said is this......
dont come into any fbody sites trying to sell your **** anymore. ill link this thread to every post you make showing wat a liar and scam you are. not to mention *******
dont come into any fbody sites trying to sell your **** anymore. ill link this thread to every post you make showing wat a liar and scam you are. not to mention *******
![GTFO](https://ls1tech.com/forums/images/smilies/gtfoslap.gif)
I like how you made yourself look like a douche though. I mean you are calling me a liar, and then quote what I said. I said the same thing twice, and that makes me a liar. I posted what the item for sale is. What it is out of. and its actual condition. Where am I being a scam artist and liar?
F U C K you hater.
What the hell is with people on this site? Some of the most custom and bad *** cars I have ever seen are members on this site. And STILL the faggit members are not to sure what the F U C K a CUSTOM application is about?
Get F U C K I N real guys. I understand you are either too poor, or too stupid to build a NICE car with quality parts that will hold together and still put a lot of power to the wheels. Just because something is out of your skill level, and / or price range does not make it a scam, DOUCHE BAG.
#15
On The Tree
iTrader: (7)
Join Date: Aug 2007
Location: Dinwiddie, Va
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
the fact that you told him it would bolt right in if he welded his tabs on there is the lie *******......
you said then after that he will WANT to run an adjustable suspention and then said that like it was no big deal that you should with any rear end.....
you didnt tell him that there is no torque arm provisions or that your rear has drum brakes or even the bigger fact of the person would then have to spend THOUSANDS to have there car fabbed to work with that junk you are trying to sell and spend thousands more buying a 4-link setup and having it installed....
cary your peice of **** *** back you your raggedy *** chevelle forums you lieing peice of ****
you said then after that he will WANT to run an adjustable suspention and then said that like it was no big deal that you should with any rear end.....
you didnt tell him that there is no torque arm provisions or that your rear has drum brakes or even the bigger fact of the person would then have to spend THOUSANDS to have there car fabbed to work with that junk you are trying to sell and spend thousands more buying a 4-link setup and having it installed....
cary your peice of **** *** back you your raggedy *** chevelle forums you lieing peice of ****
#16
Teching In
Thread Starter
iTrader: (2)
Join Date: Jul 2006
Location: Utah
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yes it will. You will have to cut off your suspension mounting brackets, and weld them up to the 12 bolt.
uh, ya I did.
This is a Chevelle 12 Bolt, that has all STRANGE stuff! The drum brakes are GM.
Maybe you should do some research before you start being a douche on public forums. You have no clue what you are talking about.
Maybe you should learn some spelling and grammar my man. You will be much more successful at being a hard *** if people can understand what you are typing. "back you your raggedy *** Chevelle forums" uh ya, what?
Just don't breed and infect the gene pool.
![Rolleyes](https://ls1tech.com/forums/images/smilies/LS1Tech/rolleyes.gif)
Maybe I am missing why people are thinking this rear end is the devil. I understand it was not made for a Camaro or a Trans Am. Does that make it a scam to sell it on an LS1 website? I see now that there is a section for LSx parts, and one for NON LSx parts. Maybe that is why everyone is seeing this as a "scam" or that this rear end is a Piece Of Junk?
#18
On The Tree
iTrader: (7)
Join Date: Aug 2007
Location: Dinwiddie, Va
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
read post number 4 *******.....
and then re-read what you put in quotations in your last post....
as for your next lie of there being no good way to have provisions for a torque arm on a 12 bolt or 9 inch?
uhhhhhhhh you can buy them from strange and moser and several other companies just like you say they dont come.....
as for what i spent on my car? and the times it runs? 11.81 at 119 with 2.73 gears and a 28 inch tire on JUST MOTOR isnt to bad. expecially since the trex works best with 4.56 gears. good gears and spraying it with the 130 shot its tuned for will get it DEEP DEEP into the 10s. and the 25k is including what i paid for the car....
but if my turd is so slow tough guy, come on out and sit beside it for a grand.
if not, then STFU go back and get back under that rock you came from under
Last edited by RiskyZ28; 11-11-2007 at 07:35 PM.