Emoney97ss

iTrader: (42)

I have a nearly brand new set of Prc 5.3L Stage 2.5 heads, have been milled .030 and have 2.02 intake 1.57 exhaust valves in them.... I bought these from a guy with 300 miles on them, and since then I but a new prc dual valve spring kit on them, and had them hand ported which cost me another 350 bucks... these heads will out flow the normal Prc 5.3L Stage 2.5 heads, and like these heads are basically brand new.... i'm going to ask 1250 plus shipping and paypal fee's.. i know that is more then a set from tsp, but like i said these have been hand ported and will flow more then the cnc'd one's that come from tsp... The guy that had these heads before me made 488 with a cam similar that was a little bit bigger then a ms3 and that was before they were hand ported, so please people don't try to low ball me, if i can't get what i want then i will keep them and put them on my car...

lovin_myZ

if i could sell my wheels those heads would be mine.. bump for ya man

98RedBird

iTrader: (77)

I am very interested in them, but why aren't you keeping them?

Emoney97ss

iTrader: (42)

i'm not keeping them because i don't want to flycut my pistons, my original plan was to buy a set of pistons with valve reliefs in them... but now i'm changing my mind to just do heads cam and spray... and i don't want to cut into the pistons if i'm going to be running a 200 shot on a stock short block....

Emoney97ss

iTrader: (42)

t.t.t. for the night...

Emoney97ss

iTrader: (42)

I've have a zex dry kit with a 125 pill in it... I've never used the kit put i bought from a guy on here used.... It comes with the box, the purge, and the lines... it has all the wiring and the main feed liine... I'm asking 100 plus shipping and paypal fees...

URNMYGTO

iTrader: (1)

jUST PMED YOU ON THE KIT WANT TO PURCHASE

Emoney97ss

iTrader: (42)

pm sent back...

Emoney97ss

iTrader: (42)

no one needs a good set of heads?

Ls1Gummi

iTrader: (2)

What type of cam are you runnin;if you even have one?

LS1HIGHLIFE

iTrader: (8)

You said they flow better than they did. Do you have flow sheets for the new numbers comparably? and pics please. I'm interested...........

Emoney97ss

iTrader: (42)

i'm not running any cam with them... I wanted to use a ms4 but then i would have to fly cut the pistons... no i don't have any flow sheets, but its pretty much common sense... i won't be able to get pics for about a week...

LS1HIGHLIFE

iTrader: (8)

Well............it not really common sense. If there hand ported then theres a possibility that not each port will flow exactly the same. You never really know if by hand porting that you are changing the air flow characteristics and causing a difference in turbulence for each cylinder. Some flow better, some don't. Not trying to bust your *****..... just passing some info

Emoney97ss

iTrader: (42)

when i bought the heads, the porting job had some lumps in them and they weren't completely smooth.. so i had a guy go through and smooth everything completely out... and assemble them which cost me 350 bucks... i will trade these for a set that isn't milled, or a set of ls6 heads that have been ported with bigger valves..

Emoney97ss

iTrader: (42)

t.t.t....