New LS2 404ci Forged Stroker Short Block
#1
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Jan 2005
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
SOLD
This is a brand new 404ci. LS2 Aluminum Short Block that was balanced, blueprinted and assembled by BES in St. Lion, IN, winners of the Engine Masters Challenge for the last 2 years running. This build was done with only the best parts in mind and was built for serious power and reliabilty. It will work great for most boost applications, large shots of N2O or very healthy radical NA applications. There is no cam as it will be left up to the buyer to complete the valvetrain. No cheapskate parts in this one guys. The buyer must supply front, rear and valley covers along with cam and lifters. A cam can be specced, matched and assembled if buyer so wishes. Ask about any other build option if desired. Below is the list of top quality parts that are only options in such 402 builds offered by other shops.
-Brand New LS2 Block
-10.5:1 Compression with 66cc heads(adjust chamber size and gasket thickness to manipulate compression if desired)
-4.005 Mahle Forged Race Pistons
-Manley 6.125 Forged rods
-Callies Forged Crank
-ACL Race Rod and Main Bearings
-Brand New GM Block plugs and misc. parts
-High Quality Single Roller T-Chain
If shipped, shipping will run approximately $200. Possible partial trade for very high quality cylinder heads.
Asking price is $4500 shipped OBO.
This is a brand new 404ci. LS2 Aluminum Short Block that was balanced, blueprinted and assembled by BES in St. Lion, IN, winners of the Engine Masters Challenge for the last 2 years running. This build was done with only the best parts in mind and was built for serious power and reliabilty. It will work great for most boost applications, large shots of N2O or very healthy radical NA applications. There is no cam as it will be left up to the buyer to complete the valvetrain. No cheapskate parts in this one guys. The buyer must supply front, rear and valley covers along with cam and lifters. A cam can be specced, matched and assembled if buyer so wishes. Ask about any other build option if desired. Below is the list of top quality parts that are only options in such 402 builds offered by other shops.
-Brand New LS2 Block
-10.5:1 Compression with 66cc heads(adjust chamber size and gasket thickness to manipulate compression if desired)
-4.005 Mahle Forged Race Pistons
-Manley 6.125 Forged rods
-Callies Forged Crank
-ACL Race Rod and Main Bearings
-Brand New GM Block plugs and misc. parts
-High Quality Single Roller T-Chain
If shipped, shipping will run approximately $200. Possible partial trade for very high quality cylinder heads.
Asking price is $4500 shipped OBO.
Last edited by SRP; 04-12-2008 at 03:40 PM. Reason: typo
#4
Teching In
iTrader: (5)
Join Date: Jun 2003
Location: San Antonio, Texas
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This is a brand new 404ci. LS2 Aluminum Short Block that was balanced, blueprinted and assembled by BES in St. Lion, IN, winners of the Engine Masters Challenge for the last 2 years running. This build was done with only the best parts in mind and was built for serious power and reliabilty. It will work great for most boost applications, large shots of N2O or very healthy radical NA applications. There is no cam as it will be left up to the buyer to complete the valvetrain. No cheapskate parts in this one guys. The buyer must supply front, rear and valley covers along with cam and lifters. A cam can be specced, matched and assembled if buyer so wishes. Ask about any other build option if desired. Below is the list of top quality parts that are only options in such 402 builds offered by other shops.
-Brand New LS2 Block
-10.5:1 Compression with 66cc heads(adjust chamber size and gasket thickness to manipulate compression if desired)
-4.005 Mahle Forged Race Pistons
-Manley 6.125 Forged rods
-Callies Forged Crank
-ACL Race Rod and Main Bearings
-Brand New GM Block plugs and misc. parts
-High Quality Single Roller T-Chain
If shipped, shipping will run approximately $200. Possible partial trade for very high quality cylinder heads.
Asking price is $4500 shipped OBO.
-Brand New LS2 Block
-10.5:1 Compression with 66cc heads(adjust chamber size and gasket thickness to manipulate compression if desired)
-4.005 Mahle Forged Race Pistons
-Manley 6.125 Forged rods
-Callies Forged Crank
-ACL Race Rod and Main Bearings
-Brand New GM Block plugs and misc. parts
-High Quality Single Roller T-Chain
If shipped, shipping will run approximately $200. Possible partial trade for very high quality cylinder heads.
Asking price is $4500 shipped OBO.